Опубликованные RFC, связи обновления и замены, официальные статусы и русские переводы.
Реестр · 9 842 документов
Multi-Threaded Routing Toolkit (MRT) Routing Information Export Format
This document describes the MRT format for routing information export. This format was developed in concert with the Multi-threaded Routing Toolkit (MRT) from whence the format takes it name. The format can be used to export routing protocol messages, state changes, and routing information base contents. [STANDARDS-TRACK]
An Interface Identifier (ID) Hello Option for PIM
This document defines a new PIM Hello option to advertise an Interface Identifier that can be used by PIM protocols to uniquely identify an interface of a neighboring router. [STANDARDS-TRACK]
Use Cases and Requirements for DNS-Based Authentication of Named Entities (DANE)
Many current applications use the certificate-based authentication features in Transport Layer Security (TLS) to allow clients to verify that a connected server properly represents a desired domain name. Typically, this authentication has been based on PKIX certificate chains rooted in well-known certificate authorities (CAs), but additional information can be provided via the DNS itself. This doc…
Moving RFC 4693 to Historic
This document moves RFC 4693 to Historic status. It also obsoletes RFC 4693. This document is not an Internet Standards Track specification; it is published for informational purposes.
A Survey of In-Network Storage Systems
This document surveys deployed and experimental in-network storage systems and describes their applicability for the DECADE (DECoupled Application Data Enroute) architecture. This document is not an Internet Standards Track specification; it is published for informational purposes.
Flow-Aware Transport of Pseudowires over an MPLS Packet Switched Network
Where the payload of a pseudowire comprises a number of distinct flows, it can be desirable to carry those flows over the Equal Cost Multiple Paths (ECMPs) that exist in the packet switched network. Most forwarding engines are able to generate a hash of the MPLS label stack and use this mechanism to balance MPLS flows over ECMPs. This document describes a method of identifying the flows, or flow g…
Guidelines for Considering New Performance Metric Development
This document describes a framework and a process for developing Performance Metrics of protocols and applications transported over IETF-specified protocols. These metrics can be used to characterize traffic on live networks and services. This memo documents an Internet Best Current Practice.
MPLS Upstream Label Assignment for LDP
This document describes procedures for distributing upstream-assigned labels for the Label Distribution Protocol (LDP). It also describes how these procedures can be used for avoiding branch Label Switching Router (LSR) traffic replication on a LAN for LDP point-to-multipoint (P2MP) Label Switched Paths (LSPs). [STANDARDS-TRACK]
Label Distribution Protocol Extensions for Point-to-Multipoint and Multipoint-to-Multipoint Label Switched Paths
This document describes extensions to the Label Distribution Protocol (LDP) for the setup of point-to-multipoint (P2MP) and multipoint-to-multipoint (MP2MP) Label Switched Paths (LSPs) in MPLS networks. These extensions are also referred to as multipoint LDP. Multipoint LDP constructs the P2MP or MP2MP LSPs without interacting with or relying upon any other multicast tree construction protocol. Pr…
GMPLS Asymmetric Bandwidth Bidirectional Label Switched Paths (LSPs)
This document defines a method for the support of GMPLS asymmetric bandwidth bidirectional Label Switched Paths (LSPs). The approach presented is applicable to any switching technology and builds on the original Resource Reservation Protocol (RSVP) model for the transport of traffic-related parameters. This document moves the experiment documented in RFC 5467 to the standards track and obsoletes R…
VP8 Data Format and Decoding Guide
This document describes the VP8 compressed video data format, together with a discussion of the decoding procedure for the format. This document is not an Internet Standards Track specification; it is published for informational purposes.
General Area Review Team (Gen-ART) Experiences
The General Area Review Team (Gen-ART) has been doing reviews of Internet-Drafts (I-Ds) since 2004. This document discusses the experience and the lessons learned over the past 7 years of this process. The review team initially reviewed the I-Ds before each of the IESG telechats. Since late 2005, review team members have been assigned to review I-Ds during IETF Last Call, unless no IETF Last Call …
An FTP Application Layer Gateway (ALG) for IPv6-to-IPv4 Translation
The File Transfer Protocol (FTP) has a very long history, and despite the fact that today other options exist to perform file transfers, FTP is still in common use. As such, in situations where some client computers only have IPv6 connectivity while many servers are still IPv4-only and IPv6-to-IPv4 translators are used to bridge that gap, it is important that FTP is made to work through these tran…
Advice on When It Is Safe to Start Sending Data on Label Switched Paths Established Using RSVP-TE
The Resource Reservation Protocol (RSVP) has been extended to support Traffic Engineering (TE) in Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) networks. The protocol enables signaling exchanges to establish Label Switched Paths (LSPs) that traverse nodes and link to provide end-to-end data paths. Each node is programmed with "cross-connect" information as the signaling message…
Unique Origin Autonomous System Numbers (ASNs) per Node for Globally Anycasted Services
This document makes recommendations regarding the use of unique origin autonomous system numbers (ASNs) per node for globally anycasted critical infrastructure services in order to provide routing system discriminators for a given anycasted prefix. Network management and monitoring techniques, or other operational mechanisms, may employ this new discriminator in whatever manner best accommodates t…
The 'Codecs' and 'Profiles' Parameters for "Bucket" Media Types
Several MIME type/subtype combinations exist that can contain different media formats. A receiving agent thus needs to examine the details of such media content to determine if the specific elements can be rendered given an available set of codecs. Especially when the end system has limited resources, or the connection to the end system has limited bandwidth, it is helpful to know from the Content…
Suite B Profile for Internet Protocol Security (IPsec)
The United States Government has published guidelines for "NSA Suite B Cryptography" dated July, 2005, which defines cryptographic algorithm policy for national security applications. This document specifies the conventions for using Suite B cryptography in IP Security (IPsec). Since many of the Suite B algorithms are used in other environments, the majority of the conventions needed for the Suite…
Suite B Cryptographic Suites for IPsec
This document proposes four cryptographic user interface suites ("UI suites") for IP Security (IPsec), similar to the two suites specified in RFC 4308. The four new suites provide compatibility with the United States National Security Agency's Suite B specifications. This document obsoletes RFC 4869, which presented earlier versions of these suites. This document is not an Internet Standards Track…
MPLS Transport Profile (MPLS-TP) Linear Protection
This document is a product of a joint Internet Engineering Task Force (IETF) / International Telecommunications Union Telecommunications Standardization Sector (ITU-T) effort to include an MPLS Transport Profile within the IETF MPLS and Pseudowire Emulation Edge-to-Edge (PWE3) architectures to support the capabilities and functionalities of a packet transport network as defined by the ITU-T. This …
DomainKeys Identified Mail (DKIM) and Mailing Lists
DomainKeys Identified Mail (DKIM) allows an ADministrative Management Domain (ADMD) to assume some responsibility for a message. Based on deployment experience with DKIM, this document provides guidance for the use of DKIM with scenarios that include Mailing List Managers (MLMs). This memo documents an Internet Best Current Practice.
DomainKeys Identified Mail (DKIM) Signatures
DomainKeys Identified Mail (DKIM) permits a person, role, or organization that owns the signing domain to claim some responsibility for a message by associating the domain with the message. This can be an author's organization, an operational relay, or one of their agents. DKIM separates the question of the identity of the Signer of the message from the purported author of the message. Assertion o…
A Packet Loss and Delay Measurement Profile for MPLS-Based Transport Networks
Procedures and protocol mechanisms to enable efficient and accurate measurement of packet loss, delay, and throughput in MPLS networks are defined in RFC 6374. The MPLS Transport Profile (MPLS-TP) is the set of MPLS protocol functions applicable to the construction and operation of packet- switched transport networks. This document describes a profile of the general MPLS loss, delay, and throughpu…
Packet Loss and Delay Measurement for MPLS Networks
Many service provider service level agreements (SLAs) depend on the ability to measure and monitor performance metrics for packet loss and one-way and two-way delay, as well as related metrics such as delay variation and channel throughput. This measurement capability also provides operators with greater visibility into the performance characteristics of their networks, thereby facilitating planni…
MPLS Transport Profile (MPLS-TP) Control Plane Framework
The MPLS Transport Profile (MPLS-TP) supports static provisioning of transport paths via a Network Management System (NMS) and dynamic provisioning of transport paths via a control plane. This document provides the framework for MPLS-TP dynamic provisioning and covers control-plane addressing, routing, path computation, signaling, traffic engineering, and path recovery. MPLS-TP uses GMPLS as the c…
MPLS Transport Profile (MPLS-TP) Survivability Framework
Network survivability is the ability of a network to recover traffic delivery following failure or degradation of network resources. Survivability is critical for the delivery of guaranteed network services, such as those subject to strict Service Level Agreements (SLAs) that place maximum bounds on the length of time that services may be degraded or unavailable. The Transport Profile of Multiprot…
Operations, Administration, and Maintenance Framework for MPLS-Based Transport Networks
The Transport Profile of Multiprotocol Label Switching (MPLS-TP) is a packet-based transport technology based on the MPLS Traffic Engineering (MPLS-TE) and pseudowire (PW) data-plane architectures. This document describes a framework to support a comprehensive set of Operations, Administration, and Maintenance (OAM) procedures that fulfill the MPLS-TP OAM requirements for fault, performance, and p…
MPLS Transport Profile (MPLS-TP) Identifiers
This document specifies an initial set of identifiers to be used in the Transport Profile of Multiprotocol Label Switching (MPLS-TP). The MPLS-TP requirements (RFC 5654) require that the elements and objects in an MPLS-TP environment are able to be configured and managed without a control plane. In such an environment, many conventions for defining identifiers are possible. This document defines i…
Forwarding and Control Element Separation (ForCES) Implementation Experience
The Forwarding and Control Element Separation (ForCES) protocol defines a standard communication and control mechanism through which a Control Element (CE) can control the behavior of a Forwarding Element (FE). This document captures the experience of implementing the ForCES protocol and model. Its aim is to help others by providing examples and possible strategies for implementing the ForCES prot…
Internal BGP as the Provider/Customer Edge Protocol for BGP/MPLS IP Virtual Private Networks (VPNs)
This document defines protocol extensions and procedures for BGP Provider/Customer Edge router iteration in BGP/MPLS IP VPNs. These extensions and procedures have the objective of making the usage of the BGP/MPLS IP VPN transparent to the customer network, as far as routing information is concerned. [STANDARDS-TRACK]
Addition of the Camellia Cipher Suites to Transport Layer Security (TLS)
This document specifies forty-two cipher suites for the Transport Security Layer (TLS) protocol to support the Camellia encryption algorithm as a block cipher. This document is not an Internet Standards Track specification; it is published for informational purposes.