Опубликованные RFC, связи обновления и замены, официальные статусы и русские переводы.
Реестр · 9 842 документов
IANA Registry for Interactive Connectivity Establishment (ICE) Options
It has been identified that "Interactive Connectivity Establishment (ICE): A Protocol for Network Address Translator (NAT) Traversal for Offer/Answer Protocols" (RFC 5245) is missing a registry for ICE options. This document defines this missing IANA registry and updates RFC 5245. [STANDARDS-TRACK]
Internet Assigned Numbers Authority (IANA) Procedures for the Management of the Service Name and Transport Protocol Port Number Registry
This document defines the procedures that the Internet Assigned Numbers Authority (IANA) uses when handling assignment and other requests related to the Service Name and Transport Protocol Port Number registry. It also discusses the rationale and principles behind these procedures and how they facilitate the long-term sustainability of the registry. This document updates IANA's procedures by obsol…
Dynamic Host Configuration Protocol for IPv6 (DHCPv6) Option for Dual-Stack Lite
This document specifies a DHCPv6 option that is meant to be used by a Dual-Stack Lite Basic Bridging BroadBand (B4) element to discover the IPv6 address of its corresponding Address Family Transition Router (AFTR). [STANDARDS-TRACK]
Dual-Stack Lite Broadband Deployments Following IPv4 Exhaustion
This document revisits the dual-stack model and introduces the Dual- Stack Lite technology aimed at better aligning the costs and benefits of deploying IPv6 in service provider networks. Dual-Stack Lite enables a broadband service provider to share IPv4 addresses among customers by combining two well-known technologies: IP in IP (IPv4- in-IPv6) and Network Address Translation (NAT). [STANDARDS-TRA…
Multicast Acquisition Report Block Type for RTP Control Protocol (RTCP) Extended Reports (XRs)
In most RTP-based multicast applications, the RTP source sends inter- related data. Due to this interdependency, randomly joining RTP receivers usually cannot start consuming the multicast data right after they join the session. Thus, they often experience a random acquisition delay. An RTP receiver can use one or more different approaches to achieve rapid acquisition. Yet, due to various factors,…
Moving DIGEST-MD5 to Historic
This memo describes problems with the DIGEST-MD5 Simple Authentication and Security Layer (SASL) mechanism as specified in RFC 2831. It marks DIGEST-MD5 as OBSOLETE in the IANA Registry of SASL mechanisms and moves RFC 2831 to Historic status. This document is not an Internet Standards Track specification; it is published for informational purposes.
RaptorQ Forward Error Correction Scheme for Object Delivery
This document describes a Fully-Specified Forward Error Correction (FEC) scheme, corresponding to FEC Encoding ID 6, for the RaptorQ FEC code and its application to reliable delivery of data objects. RaptorQ codes are a new family of codes that provide superior flexibility, support for larger source block sizes, and better coding efficiency than Raptor codes in RFC 5053. RaptorQ is also a fountain…
IS-IS Extensions Supporting IEEE 802.1aq Shortest Path Bridging
802.1aq Shortest Path Bridging (SPB) has been standardized by the IEEE as the next step in the evolution of the various spanning tree and registration protocols. 802.1aq allows for true shortest path forwarding in a mesh Ethernet network context utilizing multiple equal cost paths. This permits it to support much larger Layer 2 topologies, with faster convergence, and vastly improved use of the me…
IANA Considerations for Network Layer Protocol Identifiers
Some protocols being developed or extended by the IETF make use of the ISO/IEC (International Organization for Standardization / International Electrotechnical Commission) Network Layer Protocol Identifier (NLPID). This document provides NLPID IANA considerations. This memo documents an Internet Best Current Practice.
Routing Bridges (RBridges): Adjacency
The IETF TRILL (TRansparent Interconnection of Lots of Links) protocol provides optimal pair-wise data forwarding without configuration, safe forwarding even during periods of temporary loops, and support for multipathing of both unicast and multicast traffic. TRILL accomplishes this by using IS-IS (Intermediate System to Intermediate System) link state routing and by encapsulating traffic using a…
Transparent Interconnection of Lots of Links (TRILL) Use of IS-IS
The IETF has standardized the Transparent Interconnection of Lots of Links (TRILL) protocol, which provides transparent Layer 2 forwarding using encapsulation with a hop count and IS-IS link state routing. This document specifies the data formats and code points for the IS-IS extensions to support TRILL. [STANDARDS-TRACK]
Routing Bridges (RBridges): Base Protocol Specification
Routing Bridges (RBridges) provide optimal pair-wise forwarding without configuration, safe forwarding even during periods of temporary loops, and support for multipathing of both unicast and multicast traffic. They achieve these goals using IS-IS routing and encapsulation of traffic with a header that includes a hop count. RBridges are compatible with previous IEEE 802.1 customer bridges as well …
Routing Loop Attack Using IPv6 Automatic Tunnels: Problem Statement and Proposed Mitigations
This document is concerned with security vulnerabilities in IPv6-in- IPv4 automatic tunnels. These vulnerabilities allow an attacker to take advantage of inconsistencies between the IPv4 routing state and the IPv6 routing state. The attack forms a routing loop that can be abused as a vehicle for traffic amplification to facilitate denial- of-service (DoS) attacks. The first aim of this document is…
Sender RTT Estimate Option for the Datagram Congestion Control Protocol (DCCP)
This document specifies an update to the round-trip time (RTT) estimation algorithm used for TFRC (TCP-Friendly Rate Control) congestion control by the Datagram Congestion Control Protocol (DCCP). It updates specifications for the CCID-3 and CCID-4 Congestion Control IDs of DCCP. The update addresses parameter-estimation problems occurring with TFRC-based DCCP congestion control. It uses a recomme…
Datatracker States and Annotations for the IAB, IRTF, and Independent Submission Streams
This document describes extending the IETF Datatracker to capture and display the progression of Internet-Drafts that are intended to be published as RFCs by the IAB, IRTF, or Independent Submissions Editor. The states and annotations that are to be added to the Datatracker will be applied to Internet-Drafts as soon as any of these streams identify the Internet-Draft as a potential eventual RFC, a…
xCal: The XML Format for iCalendar
This specification defines "xCal", an XML format for iCalendar data. [STANDARDS-TRACK]
Protocol for Access Node Control Mechanism in Broadband Networks
This document describes the Access Node Control Protocol (ANCP). ANCP operates between a Network Access Server (NAS) and an Access Node (e.g., a Digital Subscriber Line Access Multiplexer (DSLAM)) in a multi-service reference architecture in order to perform operations related to Quality of Service, service, and subscribers. Use cases for ANCP are documented in RFC 5851. As well as describing the …
Issues Associated with Designating Additional Private IPv4 Address Space
When a private network or internetwork grows very large, it is sometimes not possible to address all interfaces using private IPv4 address space because there are not enough addresses. This document describes the problems faced by those networks, the available options, and the issues involved in assigning a new block of private IPv4 address space. While this informational document does not make a …
Suite B in Secure/Multipurpose Internet Mail Extensions (S/MIME)
This document specifies the conventions for using the United States National Security Agency's Suite B algorithms in Secure/Multipurpose Internet Mail Extensions (S/MIME) as specified in RFC 5751. This document obsoletes RFC 5008. This document is not an Internet Standards Track specification; it is published for informational purposes.
Basic Socket Interface Extensions for the Host Identity Protocol (HIP)
This document defines extensions to the current sockets API for the Host Identity Protocol (HIP). The extensions focus on the use of public-key-based identifiers discovered via DNS resolution, but also define interfaces for manual bindings between Host Identity Tags (HITs) and locators. With the extensions, the application can also support more relaxed security models where communication can be no…
Sockets Application Program Interface (API) for Multihoming Shim
This document specifies sockets API extensions for the multihoming shim layer. The API aims to enable interactions between applications and the multihoming shim layer for advanced locator management, and access to information about failure detection and path exploration. This document is based on an assumption that a multihomed host is equipped with a conceptual sub-layer (hereafter called "shim s…
IANA Registration for Enumservice 'iax'
This document registers an Enumservice for the Inter-Asterisk eXchange (IAX) protocol according to the guidelines given in RFC 6117. This document is not an Internet Standards Track specification; it is published for informational purposes.
NAT Traversal Practices for Client-Server SIP
Traversal of the Session Initiation Protocol (SIP) and the sessions it establishes through Network Address Translators (NATs) is a complex problem. Currently, there are many deployment scenarios and traversal mechanisms for media traffic. This document provides concrete recommendations and a unified method for NAT traversal as well as documents corresponding flows. This document is not an Internet…
Export of Structured Data in IP Flow Information Export (IPFIX)
This document specifies an extension to the IP Flow Information Export (IPFIX) protocol specification in RFC 5101 and the IPFIX information model specified in RFC 5102 to support hierarchical structured data and lists (sequences) of Information Elements in data records. This extension allows definition of complex data structures such as variable-length lists and specification of hierarchical conta…
Mobile Networks Considerations for IPv6 Deployment
Mobile Internet access from smartphones and other mobile devices is accelerating the exhaustion of IPv4 addresses. IPv6 is widely seen as crucial for the continued operation and growth of the Internet, and in particular, it is critical in mobile networks. This document discusses the issues that arise when deploying IPv6 in mobile networks. Hence, this document can be a useful reference for service…
Protocol Support for High Availability of IKEv2/IPsec
The IPsec protocol suite is widely used for business-critical network traffic. In order to make IPsec deployments highly available, more scalable, and failure-resistant, they are often implemented as IPsec High Availability (HA) clusters. However, there are many issues in IPsec HA clustering, and in particular in Internet Key Exchange Protocol version 2 (IKEv2) clustering. An earlier document, "IP…
Pseudowire (PW) Operations, Administration, and Maintenance (OAM) Message Mapping
This document specifies the mapping and notification of defect states between a pseudowire (PW) and the Attachment Circuits (ACs) of the end-to-end emulated service. It standardizes the behavior of Provider Edges (PEs) with respect to PW and AC defects. It addresses ATM, Frame Relay, Time Division Multiplexing (TDM), and Synchronous Optical Network / Synchronous Digital Hierarchy (SONET/SDH) PW se…
IANA Rules for MIKEY (Multimedia Internet KEYing)
This document clarifies and relaxes the IANA rules for Multimedia Internet KEYing (MIKEY). This document updates RFCs 3830, 4563, 5410, and 6043; it obsoletes RFC 4909. [STANDARDS-TRACK]
Overview of the Internet Multicast Addressing Architecture
The lack of up-to-date documentation on IP multicast address allocation and assignment procedures has caused a great deal of confusion. To clarify the situation, this memo describes the allocation and assignment techniques and mechanisms currently (as of this writing) in use. This document is not an Internet Standards Track specification; it is published for informational purposes.
Encapsulation Methods for Transport of Fibre Channel Traffic over MPLS Networks
A Fibre Channel pseudowire (PW) is used to carry Fibre Channel traffic over an MPLS network. This enables service providers to take advantage of MPLS to offer "emulated" Fibre Channel services. This document specifies the encapsulation of Fibre Channel traffic within a pseudowire. It also specifies the common procedures for using a PW to provide a Fibre Channel service. [STANDARDS-TRACK]