An Architecture for Network Management Using NETCONF and YANG
The Network Configuration Protocol (NETCONF) gives access to native capabilities of the devices within a network, defining methods for manipulating configuration databases, retrieving operational data, and invoking specific operations. YANG provides the means to define the content carried via NETCONF, both data and operations. Using both technologies, standard modules can be defined to give intero…
The Network Configuration Protocol (NETCONF) defines ways to read and edit configuration data from a NETCONF server. In some cases, part of this data may not be set by the NETCONF client, but rather a default value known to the server is used instead. In many situations the NETCONF client has a priori knowledge about default data, so the NETCONF server does not need to save it in a NETCONF configu…
Using the NETCONF Protocol over Secure Shell (SSH)
This document describes a method for invoking and running the Network Configuration Protocol (NETCONF) within a Secure Shell (SSH) session as an SSH subsystem. This document obsoletes RFC 4742. [STANDARDS-TRACK]
The Network Configuration Protocol (NETCONF) defined in this document provides mechanisms to install, manipulate, and delete the configuration of network devices. It uses an Extensible Markup Language (XML)-based data encoding for the configuration data as well as the protocol messages. The NETCONF protocol operations are realized as remote procedure calls (RPCs). This document obsoletes RFC 4741.…
Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Circuit Emulation over Packet (CEP) MIB Using SMIv2
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) circuits over a Packet Switch Network (PSN). [STANDARDS-TRACK]
Suite B Cryptographic Suites for Secure Shell (SSH)
This document describes the architecture of a Suite B compliant implementation of the Secure Shell Transport Layer Protocol and the Secure Shell Authentication Protocol. Suite B Secure Shell makes use of the elliptic curve Diffie-Hellman (ECDH) key agreement, the elliptic curve digital signature algorithm (ECDSA), the Advanced Encryption Standard running in Galois/Counter Mode (AES-GCM), two membe…
This document describes an extension of the One-Time Password (OTP) algorithm, namely the HMAC-based One-Time Password (HOTP) algorithm, as defined in RFC 4226, to support the time-based moving factor. The HOTP algorithm specifies an event-based OTP algorithm, where the moving factor is an event counter. The present work bases the moving factor on a time value. A time-based variant of the OTP algo…
The IMAP4 specification allows the searching of only the selected mailbox. A user often wants to search multiple mailboxes, and a client that wishes to support this must issue a series of SELECT and SEARCH commands, waiting for each to complete before moving on to the next. This extension allows a client to search multiple mailboxes with one command, limiting the round trips and waiting for variou…
Negotiation of Generic Image Attributes in the Session Description Protocol (SDP)
This document proposes a new generic session setup attribute to make it possible to negotiate different image attributes such as image size. A possible use case is to make it possible for a \%low-end \%hand- held terminal to display video without the need to rescale the image, something that may consume large amounts of memory and processing power. The document also helps to maintain an optimal bi…
This document describes anonymization techniques for IP flow data and the export of anonymized data using the IP Flow Information Export (IPFIX) protocol. It categorizes common anonymization schemes and defines the parameters needed to describe them. It provides guidelines for the implementation of anonymized data export and storage over IPFIX, and describes an information model and Options- based…
IANA maintains the "IS-IS TLV Codepoints" registry. This registry documents which TLVs can appear in different types of IS-IS Protocol Data Units (PDUs), but does not document which TLVs can be found in zero Remaining Lifetime Link State PDUs (LSPs), a.k.a. purges. This document extends the existing registry to record the set of TLVs that are permissible in purges and updates the rules for generat…
At present, an IS-IS purge does not contain any information identifying the Intermediate System (IS) that generates the purge. This makes it difficult to locate the source IS. To address this issue, this document defines a TLV to be added to purges to record the system ID of the IS generating it. Since normal Link State Protocol Data Unit (LSP) flooding does not change LSP contents, this TLV shoul…
An Interactive Voice Response (IVR) Control Package for the Media Control Channel Framework
This document defines a Media Control Channel Framework Package for Interactive Voice Response (IVR) dialog interaction on media connections and conferences. The package defines dialog management request elements for preparing, starting, and terminating dialog interactions, as well as associated responses and notifications. Dialog interactions are specified in a dialog language. This package defin…
This document describes a framework and protocol for application deployment where the application programming logic and media processing are distributed. This implies that application programming logic can seamlessly gain access to appropriate resources that are not co-located on the same physical network entity. The framework uses the Session Initiation Protocol (SIP) to establish an application-…
This document contains test vectors for the stream cipher RC4. This document is not an Internet Standards Track specification; it is published for informational purposes.
Session Initiation Protocol (SIP) Response Code for Indication of Terminated Dialog
This specification defines a new Session Initiation Protocol (SIP) response code, 199 Early Dialog Terminated, that a SIP forking proxy and a User Agent Server (UAS) can use to indicate to upstream SIP entities (including the User Agent Client (UAC)) that an early dialog has been terminated, before a final response is sent towards the SIP entities. [STANDARDS-TRACK]
It is commonly recognized that the Internet routing and addressing architecture is facing challenges in scalability, mobility, multi-homing, and inter-domain traffic engineering. The Routing Research Group is investigating an alternate architecture to meet these challenges. This document consists of a prioritized list of design goals for the target architecture. This document is not an Internet St…
Each Protocol Independent Multicast - Sparse Mode (PIM-SM) router in a PIM domain that supports Any Source Multicast (ASM) maintains Group-to-RP mappings that are used to identify a Rendezvous Point (RP) for a specific multicast group. PIM-SM has defined an algorithm to choose a RP from the Group-to-RP mappings learned using various mechanisms. This algorithm does not consider the PIM mode and the…
Dynamic Host Configuration Protocol Options for Coordinate-Based Location Configuration Information
This document specifies Dynamic Host Configuration Protocol options (both DHCPv4 and DHCPv6) for the coordinate-based geographic location of the client. The Location Configuration Information (LCI) includes Latitude, Longitude, and Altitude, with resolution or uncertainty indicators for each. Separate parameters indicate the reference datum for each of these values. This document obsoletes RFC 382…
Base Deployment for Multicast Listener Support in Proxy Mobile IPv6 (PMIPv6) Domains
This document describes deployment options for activating multicast listener functions in Proxy Mobile IPv6 domains without modifying mobility and multicast protocol standards. Similar to home agents in Mobile IPv6, Local Mobility Anchors of Proxy Mobile IPv6 serve as multicast subscription anchor points, while Mobile Access Gateways provide Multicast Listener Discovery (MLD) proxy functions. In t…
This specification defines a new Session Initiation Protocol (SIP) Via header field parameter, "keep", which allows adjacent SIP entities to explicitly negotiate usage of the Network Address Translation (NAT) keep-alive mechanisms defined in SIP Outbound, in cases where SIP Outbound is not supported, cannot be applied, or where usage of keep-alives is not implicitly negotiated as part of the SIP O…
Guidelines for Choosing RTP Control Protocol (RTCP) Canonical Names (CNAMEs)
The RTP Control Protocol (RTCP) Canonical Name (CNAME) is a persistent transport-level identifier for an RTP endpoint. While the Synchronization Source (SSRC) identifier of an RTP endpoint may change if a collision is detected or when the RTP application is restarted, its RTCP CNAME is meant to stay unchanged, so that RTP endpoints can be uniquely identified and associated with their RTP media str…
This document proposes a Lightweight DHCPv6 Relay Agent (LDRA) that is used to insert relay agent options in DHCPv6 message exchanges identifying client-facing interfaces. The LDRA can be implemented in existing access nodes (such as Digital Subscriber Link Access Multiplexers (DSLAMs) and Ethernet switches) that do not support IPv6 control or routing functions. [STANDARDS-TRACK]
Defining the Role and Function of IETF Protocol Parameter Registry Operators
Many Internet Engineering Task Force (IETF) protocols make use of commonly defined values that are passed in messages or packets. To ensure consistent interpretation of these values between independent implementations, there is a need to ensure that the values and associated semantic intent are uniquely defined. The IETF uses registry functions to record assigned protocol parameter values and thei…
The China Education and Research Network (CERNET) IVI Translation Design and Deployment for the IPv4/IPv6 Coexistence and Transition
This document presents the China Education and Research Network (CERNET)'s IVI translation design and deployment for the IPv4/IPv6 coexistence and transition. The IVI is a prefix-specific and stateless address mapping mechanism for "an IPv6 network to the IPv4 Internet" and "the IPv4 Internet to an IPv6 network" scenarios. In the IVI design, subsets of the ISP's IPv4 addresses are embedded in the …
Cisco Vendor-Specific RADIUS Attributes for the Delivery of Keying Material
This document defines a set of vendor-specific RADIUS Attributes designed to allow both the secure transmission of cryptographic keying material and strong authentication of any RADIUS message. These attributes have been allocated from the Cisco vendor-specific space and have been implemented by multiple vendors. This document is not an Internet Standards Track specification; it is published for i…
Regional Broadcast Using an Atmospheric Link Layer
Broadcasting is a technology that has been largely discarded in favor of technologies like multicast. This document builds on RFC 919 and describes a more efficient routing mechanism for broadcast packets destined for multiple Local Area Networks (LANs) or Metropolitan Area Networks (MANs) using an alternative link layer. It significantly reduces congestion on network equipment and does not requir…
Example Call Flows Using Session Initiation Protocol (SIP) Security Mechanisms
This document shows example call flows demonstrating the use of Transport Layer Security (TLS), and Secure/Multipurpose Internet Mail Extensions (S/MIME) in Session Initiation Protocol (SIP). It also provides information that helps implementers build interoperable SIP software. To help facilitate interoperability testing, it includes certificates used in the example call flows and processes to cre…
MPLS Transport Profile User-to-Network and Network-to-Network Interfaces
The framework for MPLS in transport networks (RFC 5921) provides reference models for the MPLS Transport Profile (MPLS-TP) Transport Service Interfaces, which are a User-to-Network Interface (UNI), and a Network-to-Network Interface (NNI). This document updates those reference models to show detailed reference points for these interfaces, along with further clarification of the functional architec…