An In-Band Data Communication Network For the MPLS Transport Profile
The Generic Associated Channel (G-ACh) has been defined as a generalization of the pseudowire (PW) associated control channel to enable the realization of a control/communication channel that is associated with Multiprotocol Label Switching (MPLS) Label Switched Paths (LSPs), MPLS PWs, MPLS LSP segments, and MPLS sections between adjacent MPLS-capable devices. The MPLS Transport Profile (MPLS-TP) …
Partial Lock Remote Procedure Call (RPC) for NETCONF
The Network Configuration protocol (NETCONF) defines the lock and unlock Remote Procedure Calls (RPCs), used to lock entire configuration datastores. In some situations, a way to lock only parts of a configuration datastore is required. This document defines a capability-based extension to the NETCONF protocol for locking portions of a configuration datastore. [STANDARDS-TRACK]
This document describes and lists the functional requirements of a federated file system and defines related terms. This document is not an Internet Standards Track specification; it is published for informational purposes.
A micro-loop is a packet forwarding loop that may occur transiently among two or more routers in a hop-by-hop packet forwarding paradigm. This framework provides a summary of the causes and consequences of micro-loops and enables the reader to form a judgement on whether micro-looping is an issue that needs to be addressed in specific networks. It also provides a survey of the currently proposed m…
This document provides a framework for the development of IP fast- reroute mechanisms that provide protection against link or router failure by invoking locally determined repair paths. Unlike MPLS fast-reroute, the mechanisms are applicable to a network employing conventional IP routing and forwarding. This document is not an Internet Standards Track specification; it is published for information…
Security Threats and Security Requirements for the Access Node Control Protocol (ANCP)
The Access Node Control Protocol (ANCP) aims to communicate Quality of Service (QoS)-related, service-related, and subscriber-related configurations and operations between a Network Access Server (NAS) and an Access Node (e.g., a Digital Subscriber Line Access Multiplexer (DSLAM)). The main goal of this protocol is to allow the NAS to configure, manage, and control access equipment, including the …
This document specifies Multiprotocol Label Switching (MPLS) Traffic Engineering Soft Preemption, a suite of protocol modifications extending the concept of preemption with the goal of reducing or eliminating traffic disruption of preempted Traffic Engineering Label Switched Paths (TE LSPs). Initially, MPLS RSVP-TE was defined with support for only immediate TE LSP displacement upon preemption. Th…
Node Behavior upon Originating and Receiving Resource Reservation Protocol (RSVP) Path Error Messages
The aim of this document is to describe a common practice with regard to the behavior of nodes that send and receive a Resource Reservation Protocol (RSVP) Traffic Engineering (TE) Path Error messages for a preempted Multiprotocol Label Switching (MPLS) or Generalized MPLS (GMPLS) Traffic Engineering Label Switched Path (TE LSP). (For reference to the notion of TE LSP preemption, see RFC 3209.) Th…
PathErr Message Triggered MPLS and GMPLS LSP Reroutes
This document describes how Resource ReserVation Protocol (RSVP) PathErr messages may be used to trigger rerouting of Multi-Protocol Label Switching (MPLS) and Generalized MPLS (GMPLS) point-to-point Traffic Engineering (TE) Label Switched Paths (LSPs) without first removing LSP state or resources. Such LSP rerouting may be desirable in a number of cases, including, for example, soft-preemption an…
This document describes how the National Institute of Standards and Technology (NIST) Secure Hash Standard family of algorithms can be used with OSPF version 2's built-in, cryptographic authentication mechanism. This updates, but does not supercede, the cryptographic authentication mechanism specified in RFC 2328. [STANDARDS-TRACK]
X.509 Key and Signature Encoding for the KeyNote Trust Management System
This memo describes X.509 key identifiers and signature encoding for version 2 of the KeyNote trust-management system (RFC 2704). X.509 certificates (RFC 5280) can be directly used in the Authorizer or Licensees field (or in both fields) in a KeyNote assertion, allowing for easy integration with protocols that already use X.509 certificates for authentication. In addition, the document defines add…
The Media Server Markup Language (MSML) is used to control and invoke many different types of services on IP media servers. The MSML control interface was initially driven by RadiSys with subsequent significant contributions from Intel, Dialogic, and others in the industry. Clients can use it to define how multimedia sessions interact on a media server and to apply services to individuals or group…
Guidelines for Considering Operations and Management of New Protocols and Protocol Extensions
New protocols or protocol extensions are best designed with due consideration of the functionality needed to operate and manage the protocols. Retrofitting operations and management is sub-optimal. The purpose of this document is to provide guidance to authors and reviewers of documents that define new protocols or protocol extensions regarding aspects of operations and management that should be c…
Keying Material Exporters for Transport Layer Security (TLS)
A number of protocols wish to leverage Transport Layer Security (TLS) to perform key establishment but then use some of the keying material for their own purposes. This document describes a general mechanism for allowing that. [STANDARDS-TRACK]
Uncoordinated Protocol Development Considered Harmful
This document identifies problems that may result from the absence of formal coordination and joint development on protocols of mutual interest between standards development organizations (SDOs). Some of these problems may cause significant harm to the Internet. The document suggests that a robust procedure is required prevent this from occurring in the future. The IAB has selected a number of cas…
Sieve Email Filtering: MIME Part Tests, Iteration, Extraction, Replacement, and Enclosure
This document defines extensions to the Sieve email filtering language to permit analysis and manipulation of the MIME body parts of an email message. [STANDARDS-TRACK]
Use of SHA-2 Algorithms with RSA in DNSKEY and RRSIG Resource Records for DNSSEC
This document describes how to produce RSA/SHA-256 and RSA/SHA-512 DNSKEY and RRSIG resource records for use in the Domain Name System Security Extensions (RFC 4033, RFC 4034, and RFC 4035). [STANDARDS TRACK]
IPv6 Address Specific BGP Extended Community Attribute
Current specifications of BGP Extended Communities (RFC 4360) support the IPv4 Address Specific Extended Community, but do not support an IPv6 Address Specific Extended Community. The lack of an IPv6 Address Specific Extended Community may be a problem when an application uses the IPv4 Address Specific Extended Community, and one wants to use this application in a pure IPv6 environment. This docum…
Data Structure for the Security Suitability of Cryptographic Algorithms (DSSC)
Since cryptographic algorithms can become weak over the years, it is necessary to evaluate their security suitability. When signing or verifying data, or when encrypting or decrypting data, these evaluations must be considered. This document specifies a data structure that enables an automated analysis of the security suitability of a given cryptographic algorithm at a given point of time, which m…
Some applications that associate state information with public key certificates can benefit from a way to link together a set of certificates that belong to the same end entity and that can safely be considered equivalent to one another for the purposes of referencing that application-state information. This memo defines a certificate extension that allows applications to establish the required li…
Baseline Encoding and Transport of Pre-Congestion Information
The objective of the Pre-Congestion Notification (PCN) architecture is to protect the quality of service (QoS) of inelastic flows within a Diffserv domain. It achieves this by marking packets belonging to PCN-flows when the rate of traffic exceeds certain configured thresholds on links in the domain. These marks can then be evaluated to determine how close the domain is to being congested. This do…
MPLS Forwarding Benchmarking Methodology for IP Flows
This document describes a methodology specific to the benchmarking of Multiprotocol Label Switching (MPLS) forwarding devices, limited to the most common MPLS packet forwarding scenarios and delay measurements for each, considering IP flows. It builds upon the tenets set forth in RFC 2544, RFC 1242, and other IETF Benchmarking Methodology Working Group (BMWG) efforts. This document seeks to extend…
Peer-to-Peer (P2P) Architecture: Definition, Taxonomies, Examples, and Applicability
In this document, we provide a survey of P2P (Peer-to-Peer) systems. The survey includes a definition and several taxonomies of P2P systems. This survey also includes a description of which types of applications can be built with P2P technologies and examples of P2P applications that are currently in use on the Internet. Finally, we discuss architectural trade-offs and provide guidelines for decid…
Application-Layer Traffic Optimization (ALTO) Problem Statement
Distributed applications -- such as file sharing, real-time communication, and live and on-demand media streaming -- prevalent on the Internet use a significant amount of network resources. Such applications often transfer large amounts of data through connections established between nodes distributed across the Internet with little knowledge of the underlying network topology. Some applications a…
Transmission of IP over Ethernet over IEEE 802.16 Networks
This document describes the transmission of IPv4 over Ethernet, as well as IPv6 over Ethernet, in an access network deploying the IEEE 802.16 cellular radio transmission technology. The Ethernet on top of IEEE 802.16 is realized by bridging connections that IEEE 802.16 provides between a base station and its associated subscriber stations. Due to the resource constraints of radio transmission syst…
RTP Payload Format for Elementary Streams with MPEG Surround Multi-Channel Audio
This memo describes extensions for the RTP payload format defined in RFC 3640 for the transport of MPEG Surround multi-channel audio. Additional Media Type parameters are defined to signal backwards- compatible transmission inside an MPEG-4 Audio elementary stream. In addition, a layered transmission scheme that doesn't use the MPEG-4 systems framework is presented to transport an MPEG Surround el…
This document describes a possible congestion control mechanism for acknowledgement (ACKs) traffic in TCP. The document specifies an end-to-end acknowledgement congestion control mechanism for TCP that uses participation from both TCP hosts: the TCP data sender and the TCP data receiver. The TCP data sender detects lost or Explicit Congestion Notification (ECN)-marked ACK packets, and tells the TC…
Extended MKCOL for Web Distributed Authoring and Versioning (WebDAV)
This specification extends the Web Distributed Authoring and Versioning (WebDAV) MKCOL (Make Collection) method to allow collections of arbitrary resourcetype to be created and to allow properties to be set at the same time. [STANDARDS-TRACK]
A Session Initiation Protocol (SIP) Media Feature Tag for MIME Application Subtypes
The caller preferences specification for the Session Initiation Protocol (SIP) allows a caller to express preferences that the call be routed to a User Agent (UA) with particular capabilities. Similarly, a specification exists to allow a UA to indicate its capabilities in a registration. Amongst those capabilities are the type of media streams the agent supports, described as top-level MIME types.…
GEOPRIV Layer 7 Location Configuration Protocol: Problem Statement and Requirements
This document provides a problem statement, lists requirements, and captures design aspects for a GEOPRIV Layer 7 (L7) Location Configuration Protocol (LCP). This protocol aims to allow an end host to obtain location information, by value or by reference, from a Location Information Server (LIS) that is located in the access network. The obtained location information can then be used for a variety…