Management Information Base for the Transmission Control Protocol (TCP)
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for implementations of the Transmission Control Protocol (TCP) in an IP version independent manner. This memo obsoletes RFCs 2452 and 2012. [STANDARDS-TRACK]
Early IANA Allocation of Standards Track Code Points
This memo discusses earlier allocation of code points by IANA as a remedy to the problem created by the "Standards Action" IANA policy for protocols for which, by the IETF process, implementation and deployment experience is desired or required prior to publication. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for im…
RObust Header Compression (ROHC): Profiles for User Datagram Protocol (UDP) Lite
This document defines Robust Header Compression (ROHC) profiles for compression of Real-Time Transport Protocol, User Datagram Protocol-Lite, and Internet Protocol (RTP/UDP-Lite/IP) packets and UDP-Lite/IP. These profiles are defined based on their differences with the profiles for UDP as specified in RFC 3095. [STANDARDS-TRACK]
Finding Internet Small Computer Systems Interface (iSCSI) Targets and Name Servers by Using Service Location Protocol version 2 (SLPv2)
The iSCSI protocol provides a way for hosts to access SCSI devices over an IP network. This document defines the use of the Service Location Protocol (SLP) by iSCSI hosts, devices, and management services, along with the SLP service type templates that describe the services they provide. [PROPOSED STANDARD]
Extensible Authentication Protocol (EAP) Method Requirements for Wireless LANs
The IEEE 802.11i MAC Security Enhancements Amendment makes use of IEEE 802.1X, which in turn relies on the Extensible Authentication Protocol (EAP). This document defines requirements for EAP methods used in IEEE 802.11 wireless LAN deployments. The material in this document has been approved by IEEE 802.11 and is being presented as an IETF RFC for informational purposes. This memo provides inform…
Protocol for Carrying Authentication and Network Access (PANA) Threat Analysis and Security Requirements
This document discusses the threats to protocols used to carry authentication for network access. The security requirements arising from these threats will be used as additional input to the Protocol for Carrying Authentication for Network Access (PANA) Working Group for designing the IP based network access authentication protocol. This memo provides information for the Internet community.
Based on an appropriate detection algorithm, the Eifel response algorithm provides a way for a TCP sender to respond to a detected spurious timeout. It adapts the retransmission timer to avoid further spurious timeouts and (depending on the detection algorithm) can avoid the often unnecessary go-back-N retransmits that would otherwise be sent. In addition, the Eifel response algorithm restores the…
Remote Authentication Dial-In User Service (RADIUS) Attributes Suboption for the Dynamic Host Configuration Protocol (DHCP) Relay Agent Information Option
The RADIUS Attributes suboption enables a network element to pass identification and authorization attributes received during RADIUS authentication to a DHCP server. When the DHCP server receives a message from a relay agent containing a RADIUS Attributes suboption, it extracts the contents of the suboption and uses that information in selecting configuration parameters for the client. [STANDARDS-…
SASLprep: Stringprep Profile for User Names and Passwords
This document describes how to prepare Unicode strings representing user names and passwords for comparison. The document defines the "SASLprep" profile of the "stringprep" algorithm to be used for both user names and passwords. This profile is intended to be used by Simple Authentication and Security Layer (SASL) mechanisms (such as PLAIN, CRAM-MD5, and DIGEST-MD5), as well as other protocols exc…
Routing Policy Specification Language next generation (RPSLng)
This memo introduces a new set of simple extensions to the Routing Policy Specification Language (RPSL), enabling the language to document routing policies for the IPv6 and multicast address families currently used in the Internet. [STANDARDS-TRACK]
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, this MIB defines objects that enable policy-based monitoring and management of Simple Network Management Protocol (SNMP) infrastructures, a scripting language, and a script execution environment. [STANDARDS-TRACK]
Use of the SEED Encryption Algorithm in Cryptographic Message Syntax (CMS)
This document specifies the conventions for using the SEED encryption algorithm for encryption with the Cryptographic Message Syntax (CMS). SEED is added to the set of optional symmetric encryption algorithms in CMS by providing two classes of unique object identifiers (OIDs). One OID class defines the content encryption algorithms and the other defines the key encryption algorithms. [STANDARDS-TR…
This document describes the SEED encryption algorithm, which has been adopted by most of the security systems in the Republic of Korea. Included are a description of the cipher and the key scheduling algorithm (Section 2), the S-boxes (Appendix A), and a set of test vectors (Appendix B). This memo provides information for the Internet community.
Definitions of Managed Objects for Network Address Translators (NAT)
This memo defines a portion of the Management Information Base (MIB) for devices implementing Network Address Translator (NAT) function. This MIB module may be used for configuration as well as monitoring of a device capable of NAT function. [STANDARDS-TRACK]
This document specifies the architectural characteristics, expected behavior, textual representation, and usage of IPv6 addresses of different scopes. According to a decision in the IPv6 working group, this document intentionally avoids the syntax and usage of unicast site-local addresses. [STANDARDS-TRACK]
This document specifies a Diameter application that can be used to implement real-time credit-control for a variety of end user services such as network access, Session Initiation Protocol (SIP) services, messaging services, and download services. [STANDARDS-TRACK]
This document describes the Diameter protocol application used for Authentication, Authorization, and Accounting (AAA) services in the Network Access Server (NAS) environment. When combined with the Diameter Base protocol, Transport Profile, and Extensible Authentication Protocol specifications, this application specification satisfies typical network access services requirements. Initial deployme…
This document specifies a Diameter application that allows a Diameter server to authenticate, authorize and collect accounting information for Mobile IPv4 services rendered to a mobile node. Combined with the Inter-Realm capability of the base protocol, this application allows mobile nodes to receive service from foreign service providers. Diameter Accounting messages will be used by the foreign a…
This document clarifies the procedures for the control of the label used on an output/downstream interface of the egress node of a Label Switched Path (LSP). This control is also known as "Egress Control". Support for Egress Control is implicit in Generalized Multi-Protocol Label Switching (GMPLS) Signaling. This document clarifies the specification of GMPLS Signaling and does not modify GMPLS sig…
This document registers the Enumservices 'web' and 'ft' by using the URI schemes 'http:', 'https:' and 'ftp:' as per the IANA registration process defined in the ENUM specification (RFC 3761). [STANDARDS-TRACK]
Textual Conventions for Internet Network Addresses
This MIB module defines textual conventions to represent commonly used Internet network layer addressing information. The intent is that these textual conventions will be imported and used in MIB modules that would otherwise define their own representations. [STANDARDS-TRACK]
Internet Printing Protocol (IPP): Job and Printer Administrative Operations
This document specifies the following 16 additional OPTIONAL system administration operations for use with the Internet Printing Protocol/1.1 (IPP), plus a few associated attributes, values, and status codes, and using the IPP Printer object to manage printer fan-out and fan-in. (Printer operations: Enable-Printer and Disable-Printer, Pause-Printer-After-Current-Job, Hold-New-Jobs and Release-Held…
Internet Printing Protocol (IPP): Requirements for IPP Notifications
This document is one of a set of documents that together describe all aspects of the Internet Printing Protocol (IPP). IPP is an application-level protocol that can be used for distributed printing on the Internet. There are multiple parts to IPP, but the primary architectural components are the Model, the Protocol, and an interface to Directory Services. This document provides a statement of the …
Internet Printing Protocol (IPP): The 'ippget' Delivery Method for Event Notifications
This document describes an extension to the Internet Printing Protocol1.1: Model and Semantics (RFC 2911, RFC 2910). This document specifies the 'ippget' Pull Delivery Method for use with the "Internet Printing Protocol (IPP): Event Notifications and Subscriptions" specification (RFC 3995). This IPPGET Delivery Method is REQUIRED for all clients and Printers that support RFC 3995. The Notification…
Internet Printing Protocol (IPP): Event Notifications and Subscriptions
This document describes an OPTIONAL extension to the Internet Printing Protocol/1.1: Model and Semantics (RFC 2911, RFC 2910). This extension allows a client to subscribe to printing related Events. Subscriptions are modeled as Subscription Objects. The Subscription Object specifies that when one of the specified Events occurs, the Printer delivers an asynchronous Event Notification to the specifi…
Indication of Message Composition for Instant Messaging
In instant messaging (IM) systems, it is useful to know during an IM conversation whether the other party is composing a message; e.g., typing or recording an audio message. This document defines a new status message content type and XML namespace that conveys information about a message being composed. The status message can indicate the composition of a message of any type, including text, voice…
Subscriber-ID Suboption for the Dynamic Host Configuration Protocol (DHCP) Relay Agent Option
This memo defines a new Subscriber-ID suboption for the Dynamic Host Configuration Protocol's (DHCP) relay agent information option. The suboption allows a DHCP relay agent to associate a stable "Subscriber-ID" with DHCP client messages in a way that is independent of the client and of the underlying physical network infrastructure. [STANDARDS-TRACK]
Media Gateway Control Protocol (MGCP) Lockstep State Reporting Mechanism
A Media Gateway Control Protocol (MGCP) endpoint that has encountered an adverse failure condition (such as being involved in a transient call when a Call Agent failover occurred) could be left in a lockstep state whereby events are quarantined but not notified. The MGCP package described in this document provides a mechanism for reporting these situations so that the new Call Agent can take the n…
Media Gateway Control Protocol (MGCP) Redirect and Reset Package
The base Media Gateway Control Protocol (MGCP) specification (RFC 3435) allows endpoints to be redirected one endpoint at a time. This document provides extensions in the form of a new MGCP package that provides mechanisms for redirecting and resetting a group of endpoints. It also includes the ability to more accurately redirect endpoints by allowing a list of Call Agents to be specified in a pre…