Definitions of Managed Objects for the Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Interface Type
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) interfaces. This document is a companion to the documents that define Managed Objects for the DS1/E1/DS2/E2 and DS3/E3 Interface Types. This memo…
Definitions of Managed Objects for the Optical Interface Type
This memo defines a portion of the Management Information Base (MIB) for use with Simple Network Management Protocol (SNMP) in TCP/IP-based internets. In particular, it defines objects for managing Optical Interfaces associated with WavelengthDivision Multiplexing systems or characterized by the Optical Transport Network (OTN) in accordance with the OTN architecture defined in ITU-T Recommendation…
Source Address Selection for the Multicast Listener Discovery (MLD) Protocol
It has come to light that there is an issue with the selection of a suitable IPv6 source address for Multicast Listener Discovery (MLD) messages when a node is performing stateless address autoconfiguration. This document is intended to clarify the rules on selecting an IPv6 address to use for MLD messages. [STANDARDS-TRACK]
Diameter Command Codes for Third Generation Partnership Project (3GPP) Release 5
This document describes the IANA's allocation of a block of Diameter Command Codes for the Third Generation Partnership Project (3GPP) Release 5. This document does not pass judgment on the usage of these command codes. Further more, these command codes are for use for Release 5. For future releases, these codes cannot be reused, but must be allocated according to the Diameter Base specification. …
The Diameter base protocol is intended to provide an Authentication, Authorization and Accounting (AAA) framework for applications such as network access or IP mobility. Diameter is also intended to work in both local Authentication, Authorization & Accounting and roaming situations. This document specifies the message format, transport, error reporting, accounting and security services to be used…
This document obsoletes RFC 2374, "An IPv6 Aggregatable Global Unicast Address Format". It defined an IPv6 address allocation structure that includes Top Level Aggregator (TLA) and Next Level Aggregator (NLA). This document makes RFC 2374 and the TLA/NLA structure historic. This memo provides information for the Internet community.
This document describes the problem space and solution requirements for developing an IP Security Policy (IPSP) configuration and management framework. The IPSP architecture provides a scalable, decentralized framework for managing, discovering and negotiating the host and network security policies that govern access, authorization, authentication, confidentiality, data integrity, and other IP Sec…
This document presents an object-oriented information model of IP Security (IPsec) policy designed to facilitate agreement about the content and semantics of IPsec policy, and enable derivations of task- specific representations of IPsec policy such as storage schema, distribution representations, and policy specification languages used to configure IPsec-enabled endpoints. The information model d…
Coexistence between Version 1, Version 2, and Version 3 of the Internet-standard Network Management Framework
The purpose of this document is to describe coexistence between version 3 of the Internet-standard Network Management Framework, (SNMPv3), version 2 of the Internet-standard Network Management Framework (SNMPv2), and the original Internet-standard Network Management Framework (SNMPv1). This document also describes how to convert MIB modules from SMIv1 format to SMIv2 format. This document obsolete…
Requirements of a Quality of Service (QoS) Solution for Mobile IP
Mobile IP ensures correct routing of packets to a mobile node as the mobile node changes its point of attachment to the Internet. However, it is also required to provide proper Quality of Service (QoS) forwarding treatment to the mobile node's packet stream at the intermediate nodes in the network, so that QoS-sensitive IP services can be supported over Mobile IP. This document describes requireme…
This document outlines a set of goals for proposed new IPv6 site- multihoming architectures. It is recognised that this set of goals is ambitious and that some goals may conflict with others. The solution or solutions adopted may only be able to satisfy some of the goals presented here. This memo provides information for the Internet community.
An Extension to the Session Initiation Protocol (SIP) for Symmetric Response Routing
The Session Initiation Protocol (SIP) operates over UDP and TCP, among others. When used with UDP, responses to requests are returned to the source address the request came from, and to the port written into the topmost Via header field value of the request. This behavior is not desirable in many cases, most notably, when the client is behind a Network Address Translator (NAT). This extension defi…
IEEE 802.1X Remote Authentication Dial In User Service (RADIUS) Usage Guidelines
This document provides suggestions on Remote Authentication Dial In User Service (RADIUS) usage by IEEE 802.1X Authenticators. The material in this document is also included within a non-normative Appendix within the IEEE 802.1X specification, and is being presented as an IETF RFC for informational purposes. This memo provides information for the Internet community.
RADIUS (Remote Authentication Dial In User Service) Support For Extensible Authentication Protocol (EAP)
This document defines Remote Authentication Dial In User Service (RADIUS) support for the Extensible Authentication Protocol (EAP), an authentication framework which supports multiple authentication mechanisms. In the proposed scheme, the Network Access Server (NAS) forwards EAP packets to and from the RADIUS server, encapsulated within EAP-Message attributes. This has the advantage of allowing th…
Mapping of Integrated Services Digital Network (ISDN) User Part (ISUP) Overlap Signalling to the Session Initiation Protocol (SIP)
This document describes a way to map Integrated Services Digital Network User Part (ISUP) overlap signalling to Session Initiation Protocol (SIP). This mechanism might be implemented when using SIP in an environment where part of the call involves interworking with the Public Switched Telephone Network (PSTN). [STANDARDS-TRACK]
Introduction to the Remote Monitoring (RMON) Family of MIB Modules
The Remote Monitoring (RMON) Framework consists of a number of interrelated documents. This memo describes these documents and how they relate to one another. This memo provides information for the Internet community.
Dynamic Authorization Extensions to Remote Authentication Dial In User Service (RADIUS)
This document describes a currently deployed extension to the Remote Authentication Dial In User Service (RADIUS) protocol, allowing dynamic changes to a user session, as implemented by network access server products. This includes support for disconnecting users and changing authorizations applicable to a user session. This memo provides information for the Internet community.
This document describes different scenarios in Third Generation Partnership Project (3GPP) defined packet network, i.e., General Packet Radio Service (GPRS) that would need IP version 6 and IP version 4 transition. The focus of this document is on the scenarios where the User Equipment (UE) connects to nodes in other networks, e.g., in the Internet. GPRS network internal transition scenarios, i.e.…
Signalling of Modem-On-Hold status in Layer 2 Tunneling Protocol (L2TP)
The Layer 2 Tunneling Protocol (L2TP) defines a mechanism for tunneling Point-to-Point Protocol (PPP) sessions. It is common for these PPP sessions to be established using modems connected over the public switched telephone network. One of the standards governing modem operation defines procedures that enable a client modem to put the call on hold and later, re-establish the modem link with minima…
Internet Protocol Version 6 over MAPOS (Multiple Access Protocol Over SONET/SDH)
Multiple Access Protocol over SONET/SDH (MAPOS) is a high-speed link- layer protocol that provides multiple access capability over a Synchronous Optical NETwork/Synchronous Digital Hierarchy (SONET/SDH). This document specifies the frame format for encapsulating an IPv6 datagram in a MAPOS frame. It also specifies the method of forming IPv6 interface identifiers, the method of detecting duplicate …
Framework Policy Information Base for Usage Feedback
This document describes a portion of the Policy Information Base (PIB) to control policy usage collection and reporting in a device. The provisioning classes specified here allow a Policy Decision Point (PDP) to select which policy objects should collect usage information, what information should be collected and when it should be reported. This PIB requires the presence of other PIBs (defined els…
In describing content internetworking as a technology targeted for use in production networks, it is useful to provide examples of the sequence of events that may occur when two content networks decide to interconnect. The scenarios presented here seek to provide some concrete examples of what content internetworking is, and also to provide a basis for evaluating content internetworking proposals.…
The purpose of this document is to provide an overview of Source-Specific Multicast (SSM) and issues related to its deployment. It discusses how the SSM service model addresses the challenges faced in inter-domain multicast deployment, changes needed to routing protocols and applications to deploy SSM and interoperability issues with current multicast service models. This memo provides information…
Known Content Network (CN) Request-Routing Mechanisms
This document presents a summary of Request-Routing techniques that are used to direct client requests to surrogates based on various policies and a possible set of metrics. The document covers techniques that were commonly used in the industry on or before December 2000. In this memo, the term Request-Routing represents techniques that is commonly called content routing or content redirection. In…
Intermediate System to Intermediate System (IS-IS) Cryptographic Authentication
This document describes the authentication of Intermediate System to Intermediate System (IS-IS) Protocol Data Units (PDUs) using the Hashed Message Authentication Codes - Message Digest 5 (HMAC-MD5) algorithm as found in RFC 2104. IS-IS is specified in International Standards Organization (ISO) 10589, with extensions to support Internet Protocol version 4 (IPv4) described in RFC 1195. The base sp…
The AES-XCBC-MAC-96 Algorithm and Its Use With IPsec
A Message Authentication Code (MAC) is a key-dependent one way hash function. One popular way to construct a MAC algorithm is to use a block cipher in conjunction with the Cipher-Block-Chaining (CBC) mode of operation. The classic CBC-MAC algorithm, while secure for messages of a pre-selected fixed length, has been shown to be insecure across messages of varying lengths such as the type found in t…
Use of the Advanced Encryption Standard (AES) Encryption Algorithm in Cryptographic Message Syntax (CMS)
This document specifies the conventions for using the Advanced Encryption Standard (AES) algorithm for encryption with the Cryptographic Message Syntax (CMS). [STANDARDS-TRACK]
Requirements for Support of Differentiated Services-aware MPLS Traffic Engineering
This document presents Service Provider requirements for support of Differentiated Services (Diff-Serv)-aware MPLS Traffic Engineering (DS- TE). Its objective is to provide guidance for the definition, selection and specification of a technical solution addressing these requirements. Specification for this solution itself is outside the scope of this document. A problem statement is first provided…
Cooperative Agreement Between the ISOC/IETF and ISO/IEC Joint Technical Committee 1/Sub Committee 6 (JTC1/SC6) on IS-IS Routing Protocol Development
This document contains the text of the agreement signed between ISOC/IETF and ISO/IEC JTC1/SC6 regarding cooperative development of the IS-IS routing protocol. The agreement includes definitions of the related work scopes for the two organizations, request for creation and maintenance of an IS-IS registry by IANA, as well as collaboration guidelines. This memo provides information for the Internet…