Multicast Control Extensions for the Access Node Control Protocol (ANCP)
This document specifies the extensions to the Access Node Control Protocol (ANCP) (RFC 6320) required for support of the multicast use cases defined in the Access Node Control Protocol framework document (RFC 5851) and one additional use case described in this document. These use cases are organized into the following ANCP capabilities: o multicast replication initiated by the Network Access Serve…
Using the International Mobile station Equipment Identity (IMEI) Uniform Resource Name (URN) as an Instance ID
This specification defines how the Uniform Resource Name (URN) reserved for the Global System for Mobile Communications Association (GSMA) identities and its sub-namespace for the International Mobile station Equipment Identity (IMEI) can be used as an instance-id. Its purpose is to fulfill the requirements for defining how a specific URN needs to be constructed and used in the '+sip.instance' Con…
A Uniform Resource Name Namespace for the Global System for Mobile Communications Association (GSMA) and the International Mobile station Equipment Identity (IMEI)
This specification defines a Uniform Resource Name (URN) namespace for the Global System for Mobile Communications Association (GSMA) and a Namespace Specific String (NSS) for the International Mobile station Equipment Identity (IMEI), as well as an associated parameter for the International Mobile station Equipment Identity and Software Version number (IMEISV). The IMEI and IMEISV were introduced…
This document specifies OCB, a shared-key blockcipher-based encryption scheme that provides confidentiality and authenticity for plaintexts and authenticity for associated data. This document is a product of the Crypto Forum Research Group (CFRG).
The Constrained Application Protocol (CoAP) is a specialized web transfer protocol for use with constrained nodes and constrained (e.g., low-power, lossy) networks. The nodes often have 8-bit microcontrollers with small amounts of ROM and RAM, while constrained networks such as IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs) often have high packet error rates and a typical throughpu…
AES-CCM Elliptic Curve Cryptography (ECC) Cipher Suites for TLS
This memo describes the use of the Advanced Encryption Standard (AES) in the Counter and CBC-MAC Mode (CCM) of operation within Transport Layer Security (TLS) to provide confidentiality and data-origin authentication. The AES-CCM algorithm is amenable to compact implementations, making it suitable for constrained environments, while at the same time providing a high level of security. The cipher s…
Using Raw Public Keys in Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)
This document specifies a new certificate type and two TLS extensions for exchanging raw public keys in Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS). The new certificate type allows raw public keys to be used for authentication.
RFC 7020 provides information about the Internet Numbers Registry System and how it is used in the distribution of autonomous system (AS) numbers and globally unique unicast Internet Protocol (IP) address space. This companion document identifies the IANA registries that are part of the Internet Numbers Registry System at this time.
Interworking between the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP): Presence
This document defines a bidirectional protocol mapping for the exchange of presence information between the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP).
Interworking between the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP): Architecture, Addresses, and Error Handling
As a foundation for the definition of bidirectional protocol mappings between the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP), this document specifies the architectural assumptions underlying such mappings as well as the mapping of addresses and error conditions.
Multipoint Label Distribution Protocol In-Band Signaling in a Virtual Routing and Forwarding (VRF) Table Context
An IP Multicast Distribution Tree (MDT) may traverse both label switching (i.e., Multiprotocol Label Switching, or MPLS) and non-label switching regions of a network. Typically, the MDT begins and ends in non-MPLS regions, but travels through an MPLS region. In such cases, it can be useful to begin building the MDT as a pure IP MDT, then convert it to an MPLS Multipoint Label Switched Path (MP-LSP…
An Architecture for Media Recording Using the Session Initiation Protocol
Session recording is a critical requirement in many communications environments such as call centers and financial trading. In some of these environments, all calls must be recorded for regulatory, compliance, and consumer protection reasons. Recording of a session is typically performed by sending a copy of a media stream to a recording device. This document describes architectures for deploying …
RTP Control Protocol (RTCP) Extended Report (XR) Blocks for Synchronization Delay and Offset Metrics Reporting
This document defines two RTP Control Protocol (RTCP) Extended Report (XR) blocks that allow the reporting of initial synchronization delay and synchronization offset metrics for use in a range of RTP applications.
RTP Control Protocol (RTCP) Extended Report (XR) Block for the Bytes Discarded Metric
The RTP Control Protocol (RTCP) is used in conjunction with the Real-time Transport Protocol (RTP) to provide a variety of short-term and long-term reception statistics. The available reporting may include aggregate information across longer periods of time as well as individual packet reporting. This document specifies a report computing the bytes discarded from the de-jitter buffer after success…
This document describes the protocol for the TCP-based convergence layer for Delay-Tolerant Networking (DTN). It is the product of the IRTF's DTN Research Group (DTNRG).
This document describes the standardization cooperation between Project 802 of the Institute of Electrical and Electronics Engineers (IEEE) and the Internet Engineering Task Force (IETF). This document obsoletes RFC 4441. Note: This document was collaboratively developed by authors from both the IEEE 802 and IETF leadership and was reviewed and approved by the IEEE 802 Executive Committee prior to…
This specification defines an HTTP header field that can be used by a client to request that certain behaviors be employed by a server while processing a request.
This document defines an HTTP extension header field that allows proxy components to disclose information lost in the proxying process, for example, the originating IP address of a request or IP address of the proxy on the user-agent-facing interface. In a path of proxying components, this makes it possible to arrange it so that each subsequent component will have access to, for example, all IP ad…
Initial Hypertext Transfer Protocol (HTTP) Method Registrations
This document registers those Hypertext Transfer Protocol (HTTP) methods that have been defined in RFCs before the IANA HTTP Method Registry was established.
Initial Hypertext Transfer Protocol (HTTP) Authentication Scheme Registrations
This document registers Hypertext Transfer Protocol (HTTP) authentication schemes that have been defined in RFCs before the IANA HTTP Authentication Scheme Registry was established.
Hypertext Transfer Protocol (HTTP/1.1): Authentication
The Hypertext Transfer Protocol (HTTP) is a stateless application- level protocol for distributed, collaborative, hypermedia information systems. This document defines the HTTP Authentication framework.
The Hypertext Transfer Protocol (HTTP) is a stateless \%application- level protocol for distributed, collaborative, hypertext information systems. This document defines HTTP caches and the associated header fields that control cache behavior or indicate cacheable response messages.
Hypertext Transfer Protocol (HTTP/1.1): Range Requests
The Hypertext Transfer Protocol (HTTP) is a stateless application- level protocol for distributed, collaborative, hypertext information systems. This document defines range requests and the rules for constructing and combining responses to those requests.
Hypertext Transfer Protocol (HTTP/1.1): Conditional Requests
The Hypertext Transfer Protocol (HTTP) is a stateless application- level protocol for distributed, collaborative, hypertext information systems. This document defines HTTP/1.1 conditional requests, including metadata header fields for indicating state changes, request header fields for making preconditions on such state, and rules for constructing the responses to a conditional request when one or…
Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content
The Hypertext Transfer Protocol (HTTP) is a stateless \%application- level protocol for distributed, collaborative, hypertext information systems. This document defines the semantics of HTTP/1.1 messages, as expressed by request methods, request header fields, response status codes, and response header fields, along with the payload of messages (metadata and body content) and mechanisms for conten…
Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing
The Hypertext Transfer Protocol (HTTP) is a stateless application-level protocol for distributed, collaborative, hypertext information systems. This document provides an overview of HTTP architecture and its associated terminology, defines the "http" and "https" Uniform Resource Identifier (URI) schemes, defines the HTTP/1.1 message syntax and parsing requirements, and describes related security c…
The Internet Protocol Suite is increasingly used on small devices with severe constraints on power, memory, and processing resources, creating constrained-node networks. This document provides a number of basic terms that have been useful in the standardization work for constrained-node networks.
This document provides guidance to prospective DHCPv6 option developers to help them create option formats that are easily adoptable by existing DHCPv6 software. It also provides guidelines for expert reviewers to evaluate new registrations. This document updates RFC 3315.