NIST · ИТ · 07da090a956fdb210e9f
Scanning Height for ANSI C63.5 Calibrations
The configuration of antennas at an Open Area Test site (OATS) for calibrations results in constructive and destructive electric fields. Regardless of the calibration method used, the antenna to be calibrated should be loacted where the field varies slowly
NIST · ИТОфициальный источник · 1998-08-01
{
"title_en": "Scanning Height for ANSI C63.5 Calibrations",
"designation": "",
"series": "",
"status": "",
"date": "1998-08-01",
"date_original": "August 1, 1998",
"url": "https://www.nist.gov/publications/scanning-height-ansi-c635-calibrations",
"source": "NIST Publications",
"display_en": "",
"authors_en": "Kenneth H. Cavcey, Dennis G. Camell",
"abstract_excerpt_en": "The configuration of antennas at an Open Area Test site (OATS) for calibrations results in constructive and destructive electric fields. Regardless of the calibration method used, the antenna to be calibrated should be loacted where the field varies slowly",
"id": "07da090a956fdb210e9f",
"sources": [
"NIST Publications"
],
"source_records": [
{
"title_en": "Scanning Height for ANSI C63.5 Calibrations",
"designation": "",
"series": "",
"status": "",
"date": "1998-08-01",
"date_original": "August 1, 1998",
"url": "https://www.nist.gov/publications/scanning-height-ansi-c635-calibrations",
"source": "NIST Publications",
"display_en": "",
"authors_en": "Kenneth H. Cavcey, Dennis G. Camell",
"abstract_excerpt_en": "The configuration of antennas at an Open Area Test site (OATS) for calibrations results in constructive and destructive electric fields. Regardless of the calibration method used, the antenna to be calibrated should be loacted where the field varies slowly"
}
],
"translation_state": "none"
}