RFC2991 · Multipath Issues in Unicast and Multicast Next-Hop Selection

{
  "id": "RFC2991",
  "number": 2991,
  "title_en": "Multipath Issues in Unicast and Multicast Next-Hop Selection",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "The effect of multipath routing on a forwarder is that the forwarder potentially has several next-hops for any given destination and must use some method to choose which next-hop should be used for a given data packet. This memo summarizes current practices, problems, and solutions. This memo provides information for the Internet community.",
  "authors": [
    "D. Thaler",
    "C. Hopps"
  ],
  "organizations": [],
  "publication_date": "2000-11-01",
  "current_status": "INFORMATIONAL",
  "current_status_ru": "Информационный",
  "publication_status": "INFORMATIONAL",
  "publication_status_ru": "Информационный",
  "lifecycle": "informational",
  "lifecycle_ru": "Справочный",
  "stream": "Legacy",
  "stream_ru": "Исторический поток",
  "area": "",
  "area_ru": "",
  "working_group": "",
  "source_draft": "draft-thaler-multipath-05",
  "page_count": 9,
  "doi": "10.17487/RFC2991",
  "keywords": [
    "routing",
    "forwarding",
    "packets",
    "ECMP"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc2991/",
    "html": "https://www.rfc-editor.org/rfc/rfc2991.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc2991.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc2991/"
  }
}