⌕ Поиск по атласу

IETF · RFC · RFC3036

RFC3036 · LDP Specification

LDP Specification

A fundamental concept in MPLS is that two Label Switching Routers (LSRs) must agree on the meaning of the labels used to forward traffic between and through them. This common understanding is achieved by using a set of procedures, called a label distribution protocol, by which one LSR informs another of label bindings it has made. This document defines a set of such procedures called LDP (for Label Distribution Protocol) by which LSRs distribute labels to support MPLS forwarding along normally routed paths. [STANDARDS-TRACK]

Официальная английская аннотация

A fundamental concept in MPLS is that two Label Switching Routers (LSRs) must agree on the meaning of the labels used to forward traffic between and through them. This common understanding is achieved by using a set of procedures, called a label distribution protocol, by which one LSR informs another of label bindings it has made. This document defines a set of such procedures called LDP (for Label Distribution Protocol) by which LSRs distribute labels to support MPLS forwarding along normally routed paths. [STANDARDS-TRACK]

Связи документа

obsoleted_by: RFC5036

Официальный источник · 2001-01-01

Полные импортированные сведения карточки
{
  "id": "RFC3036",
  "number": 3036,
  "title_en": "LDP Specification",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "A fundamental concept in MPLS is that two Label Switching Routers (LSRs) must agree on the meaning of the labels used to forward traffic between and through them. This common understanding is achieved by using a set of procedures, called a label distribution protocol, by which one LSR informs another of label bindings it has made. This document defines a set of such procedures called LDP (for Label Distribution Protocol) by which LSRs distribute labels to support MPLS forwarding along normally routed paths. [STANDARDS-TRACK]",
  "authors": [
    "L. Andersson",
    "P. Doolan",
    "N. Feldman",
    "A. Fredette",
    "B. Thomas"
  ],
  "organizations": [],
  "publication_date": "2001-01-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "superseded",
  "lifecycle_ru": "Заменён",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "mpls",
  "source_draft": "draft-ietf-mpls-ldp-11",
  "page_count": 132,
  "doi": "10.17487/RFC3036",
  "keywords": [
    "label",
    "distribution",
    "protocol"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [
      "RFC5036"
    ],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc3036/",
    "html": "https://www.rfc-editor.org/rfc/rfc3036.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc3036.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc3036/"
  }
}