RFC3532 · Requirements for the Dynamic Partitioning of Switching Elements
Requirements for the Dynamic Partitioning of Switching Elements
This document identifies a set of requirements for the mechanisms used to dynamically reallocate the resources of a switching element (e.g., an ATM switch) to its partitions. These requirements are particularly critical in the case of an operator creating a switch partition and then leasing control of that partition to a third party. This memo provides information for the Internet community.
IETF · RFCОфициальная английская аннотация
This document identifies a set of requirements for the mechanisms used to dynamically reallocate the resources of a switching element (e.g., an ATM switch) to its partitions. These requirements are particularly critical in the case of an operator creating a switch partition and then leasing control of that partition to a third party. This memo provides information for the Internet community.
{
"id": "RFC3532",
"number": 3532,
"title_en": "Requirements for the Dynamic Partitioning of Switching Elements",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "This document identifies a set of requirements for the mechanisms used to dynamically reallocate the resources of a switching element (e.g., an ATM switch) to its partitions. These requirements are particularly critical in the case of an operator creating a switch partition and then leasing control of that partition to a third party. This memo provides information for the Internet community.",
"authors": [
"T. Anderson",
"J. Buerkle"
],
"organizations": [],
"publication_date": "2003-05-01",
"current_status": "INFORMATIONAL",
"current_status_ru": "Информационный",
"publication_status": "INFORMATIONAL",
"publication_status_ru": "Информационный",
"lifecycle": "informational",
"lifecycle_ru": "Справочный",
"stream": "IETF",
"stream_ru": "IETF",
"area": "sub",
"area_ru": "sub",
"working_group": "gsmp",
"source_draft": "draft-ietf-gsmp-dyn-part-reqs-03",
"page_count": 11,
"doi": "10.17487/RFC3532",
"keywords": [
"atm",
"asynchronous transfer mode"
],
"formats": [
"TXT",
"HTML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [],
"updates": [],
"updated_by": [],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc3532/",
"html": "https://www.rfc-editor.org/rfc/rfc3532.html",
"txt": "https://www.rfc-editor.org/rfc/rfc3532.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc3532/"
}
}