⌕ Поиск по атласу

IETF · RFC · RFC3652

RFC3652 · Handle System Protocol (ver 2.1) Specification

Handle System Protocol (ver 2.1) Specification

The Handle System is a general-purpose global name service that allows secured name resolution and administration over the public Internet. This document describes the protocol used for client software to access the Handle System for both handle resolution and administration. The protocol specifies the procedure for a client software to locate the responsible handle server of any given handle. It also defines the messages exchanged between the client and server for any handle operation.

Официальная английская аннотация

The Handle System is a general-purpose global name service that allows secured name resolution and administration over the public Internet. This document describes the protocol used for client software to access the Handle System for both handle resolution and administration. The protocol specifies the procedure for a client software to locate the responsible handle server of any given handle. It also defines the messages exchanged between the client and server for any handle operation.

Связи документа

Официальный источник · 2003-11-01

Полные импортированные сведения карточки
{
  "id": "RFC3652",
  "number": 3652,
  "title_en": "Handle System Protocol (ver 2.1) Specification",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "The Handle System is a general-purpose global name service that allows secured name resolution and administration over the public Internet. This document describes the protocol used for client software to access the Handle System for both handle resolution and administration. The protocol specifies the procedure for a client software to locate the responsible handle server of any given handle. It also defines the messages exchanged between the client and server for any handle operation.",
  "authors": [
    "S. Sun",
    "S. Reilly",
    "L. Lannom",
    "J. Petrone"
  ],
  "organizations": [],
  "publication_date": "2003-11-01",
  "current_status": "INFORMATIONAL",
  "current_status_ru": "Информационный",
  "publication_status": "INFORMATIONAL",
  "publication_status_ru": "Информационный",
  "lifecycle": "informational",
  "lifecycle_ru": "Справочный",
  "stream": "INDEPENDENT",
  "stream_ru": "Независимый поток",
  "area": "",
  "area_ru": "",
  "working_group": "",
  "source_draft": "draft-sun-handle-system-protocol-05",
  "page_count": 53,
  "doi": "10.17487/RFC3652",
  "keywords": [
    "name service"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc3652/",
    "html": "https://www.rfc-editor.org/rfc/rfc3652.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc3652.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc3652/"
  }
}