RFC3736 · Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6
Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6
Stateless Dynamic Host Configuration Protocol service for IPv6 (DHCPv6) is used by nodes to obtain configuration information, such as the addresses of DNS recursive name servers, that does not require the maintenance of any dynamic state for individual clients. A node that uses stateless DHCP must have obtained its IPv6 addresses through some other mechanism, typically stateless address autoconfiguration. This document explains which parts of RFC 3315 must be implemented in each of the different kinds of DHCP agents so that agent can support stateless DHCP. [STANDARDS-TRACK]
IETF · RFCОфициальная английская аннотация
Stateless Dynamic Host Configuration Protocol service for IPv6 (DHCPv6) is used by nodes to obtain configuration information, such as the addresses of DNS recursive name servers, that does not require the maintenance of any dynamic state for individual clients. A node that uses stateless DHCP must have obtained its IPv6 addresses through some other mechanism, typically stateless address autoconfiguration. This document explains which parts of RFC 3315 must be implemented in each of the different kinds of DHCP agents so that agent can support stateless DHCP. [STANDARDS-TRACK]
{
"id": "RFC3736",
"number": 3736,
"title_en": "Stateless Dynamic Host Configuration Protocol (DHCP) Service for IPv6",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "Stateless Dynamic Host Configuration Protocol service for IPv6 (DHCPv6) is used by nodes to obtain configuration information, such as the addresses of DNS recursive name servers, that does not require the maintenance of any dynamic state for individual clients. A node that uses stateless DHCP must have obtained its IPv6 addresses through some other mechanism, typically stateless address autoconfiguration. This document explains which parts of RFC 3315 must be implemented in each of the different kinds of DHCP agents so that agent can support stateless DHCP. [STANDARDS-TRACK]",
"authors": [
"R. Droms"
],
"organizations": [],
"publication_date": "2004-04-01",
"current_status": "PROPOSED STANDARD",
"current_status_ru": "Предлагаемый стандарт",
"publication_status": "PROPOSED STANDARD",
"publication_status_ru": "Предлагаемый стандарт",
"lifecycle": "superseded",
"lifecycle_ru": "Заменён",
"stream": "IETF",
"stream_ru": "IETF",
"area": "int",
"area_ru": "Интернет",
"working_group": "dhc",
"source_draft": "draft-ietf-dhc-dhcpv6-stateless-04",
"page_count": 9,
"doi": "10.17487/RFC3736",
"keywords": [
"DHCP",
"Dynamic Host Configuration Protocol",
"IPv6"
],
"formats": [
"TXT",
"HTML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [
"RFC8415"
],
"updates": [],
"updated_by": [],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc3736/",
"html": "https://www.rfc-editor.org/rfc/rfc3736.html",
"txt": "https://www.rfc-editor.org/rfc/rfc3736.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc3736/"
}
}