The Selectively Reliable Multicast Protocol (SRMP) is a transport protocol, intended to deliver a mix of reliable and best-effort messages in an any-to-any multicast environment, where the best-effort traffic occurs in significantly greater volume than the reliable traffic and therefore can carry sequence numbers of reliable messages for loss detection. SRMP is intended for use in a distributed simulation application environment, where only the latest value of reliable transmission for any particular data identifier requires delivery. SRMP has two sublayers: a bundling sublayer handling message aggregation and congestion control, and a Selectively Reliable Transport (SRT) sublayer. Selection between reliable and best-effort messages is performed by the application. This memo defines an Experimental Protocol for the Internet community.
IETF · RFCОфициальная английская аннотация
The Selectively Reliable Multicast Protocol (SRMP) is a transport protocol, intended to deliver a mix of reliable and best-effort messages in an any-to-any multicast environment, where the best-effort traffic occurs in significantly greater volume than the reliable traffic and therefore can carry sequence numbers of reliable messages for loss detection. SRMP is intended for use in a distributed simulation application environment, where only the latest value of reliable transmission for any particular data identifier requires delivery. SRMP has two sublayers: a bundling sublayer handling message aggregation and congestion control, and a Selectively Reliable Transport (SRT) sublayer. Selection between reliable and best-effort messages is performed by the application. This memo defines an Experimental Protocol for the Internet community.
{
"id": "RFC4410",
"number": 4410,
"title_en": "Selectively Reliable Multicast Protocol (SRMP)",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "The Selectively Reliable Multicast Protocol (SRMP) is a transport protocol, intended to deliver a mix of reliable and best-effort messages in an any-to-any multicast environment, where the best-effort traffic occurs in significantly greater volume than the reliable traffic and therefore can carry sequence numbers of reliable messages for loss detection. SRMP is intended for use in a distributed simulation application environment, where only the latest value of reliable transmission for any particular data identifier requires delivery. SRMP has two sublayers: a bundling sublayer handling message aggregation and congestion control, and a Selectively Reliable Transport (SRT) sublayer. Selection between reliable and best-effort messages is performed by the application. This memo defines an Experimental Protocol for the Internet community.",
"authors": [
"M. Pullen",
"F. Zhao",
"D. Cohen"
],
"organizations": [],
"publication_date": "2006-02-01",
"current_status": "EXPERIMENTAL",
"current_status_ru": "Экспериментальный",
"publication_status": "EXPERIMENTAL",
"publication_status_ru": "Экспериментальный",
"lifecycle": "experimental",
"lifecycle_ru": "Экспериментальный",
"stream": "IETF",
"stream_ru": "IETF",
"area": "",
"area_ru": "",
"working_group": "NON WORKING GROUP",
"source_draft": "draft-pullen-srmp-06",
"page_count": 30,
"doi": "10.17487/RFC4410",
"keywords": [
"transport",
"best-effort",
"srt",
"selectively reliable transport"
],
"formats": [
"TXT",
"HTML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [],
"updates": [],
"updated_by": [],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc4410/",
"html": "https://www.rfc-editor.org/rfc/rfc4410.html",
"txt": "https://www.rfc-editor.org/rfc/rfc4410.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc4410/"
}
}