While RFC 2865 defines the Filter-Id attribute, it requires that the Network Access Server (NAS) be pre-populated with the desired filters. However, in situations where the server operator does not know which filters have been pre-populated, it is useful to specify filter rules explicitly. This document defines the NAS-Filter-Rule attribute within the Remote Authentication Dial In User Service (RADIUS). This attribute is based on the Diameter NAS-Filter-Rule Attribute Value Pair (AVP) described in RFC 4005, and the IPFilterRule syntax defined in RFC 3588. [STANDARDS-TRACK]
IETF · RFCОфициальная английская аннотация
While RFC 2865 defines the Filter-Id attribute, it requires that the Network Access Server (NAS) be pre-populated with the desired filters. However, in situations where the server operator does not know which filters have been pre-populated, it is useful to specify filter rules explicitly. This document defines the NAS-Filter-Rule attribute within the Remote Authentication Dial In User Service (RADIUS). This attribute is based on the Diameter NAS-Filter-Rule Attribute Value Pair (AVP) described in RFC 4005, and the IPFilterRule syntax defined in RFC 3588. [STANDARDS-TRACK]
{
"id": "RFC4849",
"number": 4849,
"title_en": "RADIUS Filter Rule Attribute",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "While RFC 2865 defines the Filter-Id attribute, it requires that the Network Access Server (NAS) be pre-populated with the desired filters. However, in situations where the server operator does not know which filters have been pre-populated, it is useful to specify filter rules explicitly. This document defines the NAS-Filter-Rule attribute within the Remote Authentication Dial In User Service (RADIUS). This attribute is based on the Diameter NAS-Filter-Rule Attribute Value Pair (AVP) described in RFC 4005, and the IPFilterRule syntax defined in RFC 3588. [STANDARDS-TRACK]",
"authors": [
"P. Congdon",
"M. Sanchez",
"B. Aboba"
],
"organizations": [],
"publication_date": "2007-04-01",
"current_status": "PROPOSED STANDARD",
"current_status_ru": "Предлагаемый стандарт",
"publication_status": "PROPOSED STANDARD",
"publication_status_ru": "Предлагаемый стандарт",
"lifecycle": "active",
"lifecycle_ru": "Действующий",
"stream": "IETF",
"stream_ru": "IETF",
"area": "sec",
"area_ru": "Безопасность",
"working_group": "radext",
"source_draft": "draft-ietf-radext-filter-08",
"page_count": 9,
"doi": "10.17487/RFC4849",
"keywords": [
"remote authentication dial in user service",
"nas-filter-rule"
],
"formats": [
"TXT",
"HTML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [],
"updates": [],
"updated_by": [],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc4849/",
"html": "https://www.rfc-editor.org/rfc/rfc4849.html",
"txt": "https://www.rfc-editor.org/rfc/rfc4849.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc4849/"
}
}