⌕ Поиск по атласу

IETF · RFC · RFC4951

RFC4951 · Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) "failover"

Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) "failover"

Layer 2 Tunneling Protocol (L2TP) is a connection-oriented protocol that has a shared state between active endpoints. Some of this shared state is vital for operation, but may be volatile in nature, such as packet sequence numbers used on the L2TP Control Connection. When failure of one side of a control connection occurs, a new control connection is created and associated with the old connection by exchanging information about the old connection. Such a mechanism is not intended as a replacement for an active fail over with some mirrored connection states, but as an aid for those parameters that are particularly difficult to have immediately available. Protocol extensions to L2TP defined in this document are intended to facilitate state recovery, providing additional resiliency in an L2TP network, and improving a remote system's layer 2 connectivity. [STANDARDS-TRACK]

Официальная английская аннотация

Layer 2 Tunneling Protocol (L2TP) is a connection-oriented protocol that has a shared state between active endpoints. Some of this shared state is vital for operation, but may be volatile in nature, such as packet sequence numbers used on the L2TP Control Connection. When failure of one side of a control connection occurs, a new control connection is created and associated with the old connection by exchanging information about the old connection. Such a mechanism is not intended as a replacement for an active fail over with some mirrored connection states, but as an aid for those parameters that are particularly difficult to have immediately available. Protocol extensions to L2TP defined in this document are intended to facilitate state recovery, providing additional resiliency in an L2TP network, and improving a remote system's layer 2 connectivity. [STANDARDS-TRACK]

Связи документа

Официальный источник · 2007-08-01

Полные импортированные сведения карточки
{
  "id": "RFC4951",
  "number": 4951,
  "title_en": "Fail Over Extensions for Layer 2 Tunneling Protocol (L2TP) \"failover\"",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "Layer 2 Tunneling Protocol (L2TP) is a connection-oriented protocol that has a shared state between active endpoints. Some of this shared state is vital for operation, but may be volatile in nature, such as packet sequence numbers used on the L2TP Control Connection. When failure of one side of a control connection occurs, a new control connection is created and associated with the old connection by exchanging information about the old connection. Such a mechanism is not intended as a replacement for an active fail over with some mirrored connection states, but as an aid for those parameters that are particularly difficult to have immediately available. Protocol extensions to L2TP defined in this document are intended to facilitate state recovery, providing additional resiliency in an L2TP network, and improving a remote system's layer 2 connectivity. [STANDARDS-TRACK]",
  "authors": [
    "V. Jain"
  ],
  "organizations": [],
  "publication_date": "2007-08-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "l2tpext",
  "source_draft": "draft-ietf-l2tpext-failover-12",
  "page_count": 26,
  "doi": "10.17487/RFC4951",
  "keywords": [
    "control connection",
    "layer 2 connectivity"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc4951/",
    "html": "https://www.rfc-editor.org/rfc/rfc4951.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc4951.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc4951/"
  }
}