⌕ Поиск по атласу

IETF · RFC · RFC5671

RFC5671 · Applicability of the Path Computation Element (PCE) to Point-to-Multipoint (P2MP) MPLS and GMPLS Traffic Engineering (TE)

Applicability of the Path Computation Element (PCE) to Point-to-Multipoint (P2MP) MPLS and GMPLS Traffic Engineering (TE)

The Path Computation Element (PCE) provides path computation functions in support of traffic engineering in Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) networks. Extensions to the MPLS and GMPLS signaling and routing protocols have been made in support of point-to-multipoint (P2MP) Traffic Engineered (TE) Label Switched Paths (LSPs). This document examines the applicability of PCE to path computation for P2MP TE LSPs in MPLS and GMPLS networks. It describes the motivation for using a PCE to compute these paths and examines which of the PCE architectural models are appropriate. This memo provides information for the Internet community.

Официальная английская аннотация

The Path Computation Element (PCE) provides path computation functions in support of traffic engineering in Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) networks. Extensions to the MPLS and GMPLS signaling and routing protocols have been made in support of point-to-multipoint (P2MP) Traffic Engineered (TE) Label Switched Paths (LSPs). This document examines the applicability of PCE to path computation for P2MP TE LSPs in MPLS and GMPLS networks. It describes the motivation for using a PCE to compute these paths and examines which of the PCE architectural models are appropriate. This memo provides information for the Internet community.

Связи документа

Официальный источник · 2009-10-01

Полные импортированные сведения карточки
{
  "id": "RFC5671",
  "number": 5671,
  "title_en": "Applicability of the Path Computation Element (PCE) to Point-to-Multipoint (P2MP) MPLS and GMPLS Traffic Engineering (TE)",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "The Path Computation Element (PCE) provides path computation functions in support of traffic engineering in Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) networks. Extensions to the MPLS and GMPLS signaling and routing protocols have been made in support of point-to-multipoint (P2MP) Traffic Engineered (TE) Label Switched Paths (LSPs). This document examines the applicability of PCE to path computation for P2MP TE LSPs in MPLS and GMPLS networks. It describes the motivation for using a PCE to compute these paths and examines which of the PCE architectural models are appropriate. This memo provides information for the Internet community.",
  "authors": [
    "S. Yasukawa",
    "A. Farrel"
  ],
  "organizations": [],
  "publication_date": "2009-10-01",
  "current_status": "INFORMATIONAL",
  "current_status_ru": "Информационный",
  "publication_status": "INFORMATIONAL",
  "publication_status_ru": "Информационный",
  "lifecycle": "informational",
  "lifecycle_ru": "Справочный",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "pce",
  "source_draft": "draft-ietf-pce-p2mp-app-02",
  "page_count": 15,
  "doi": "10.17487/RFC5671",
  "keywords": [
    "multiprotocol label switching",
    "generalized mpls"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc5671/",
    "html": "https://www.rfc-editor.org/rfc/rfc5671.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc5671.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc5671/"
  }
}