⌕ Поиск по атласу

IETF · RFC · RFC5786

RFC5786 · Advertising a Router's Local Addresses in OSPF Traffic Engineering (TE) Extensions

Advertising a Router's Local Addresses in OSPF Traffic Engineering (TE) Extensions

OSPF Traffic Engineering (TE) extensions are used to advertise TE Link State Advertisements (LSAs) containing information about TE-enabled links. The only addresses belonging to a router that are advertised in TE LSAs are the local addresses corresponding to TE-enabled links, and the local address corresponding to the Router ID. In order to allow other routers in a network to compute Multiprotocol Label Switching (MPLS) Traffic Engineered Label Switched Paths (TE LSPs) to a given router's local addresses, those addresses must also be advertised by OSPF TE. This document describes procedures that enhance OSPF TE to advertise a router's local addresses. [STANDARDS-TRACK]

Официальная английская аннотация

OSPF Traffic Engineering (TE) extensions are used to advertise TE Link State Advertisements (LSAs) containing information about TE-enabled links. The only addresses belonging to a router that are advertised in TE LSAs are the local addresses corresponding to TE-enabled links, and the local address corresponding to the Router ID. In order to allow other routers in a network to compute Multiprotocol Label Switching (MPLS) Traffic Engineered Label Switched Paths (TE LSPs) to a given router's local addresses, those addresses must also be advertised by OSPF TE. This document describes procedures that enhance OSPF TE to advertise a router's local addresses. [STANDARDS-TRACK]

Связи документа

updates: RFC3630

updated_by: RFC6827, RFC8687

Официальный источник · 2010-03-01

Полные импортированные сведения карточки
{
  "id": "RFC5786",
  "number": 5786,
  "title_en": "Advertising a Router's Local Addresses in OSPF Traffic Engineering (TE) Extensions",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "OSPF Traffic Engineering (TE) extensions are used to advertise TE Link State Advertisements (LSAs) containing information about TE-enabled links. The only addresses belonging to a router that are advertised in TE LSAs are the local addresses corresponding to TE-enabled links, and the local address corresponding to the Router ID. In order to allow other routers in a network to compute Multiprotocol Label Switching (MPLS) Traffic Engineered Label Switched Paths (TE LSPs) to a given router's local addresses, those addresses must also be advertised by OSPF TE. This document describes procedures that enhance OSPF TE to advertise a router's local addresses. [STANDARDS-TRACK]",
  "authors": [
    "R. Aggarwal",
    "K. Kompella"
  ],
  "organizations": [],
  "publication_date": "2010-03-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "ospf",
  "source_draft": "draft-ietf-ospf-te-node-addr-07",
  "page_count": 7,
  "doi": "10.17487/RFC5786",
  "keywords": [],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [
      "RFC3630"
    ],
    "updated_by": [
      "RFC6827",
      "RFC8687"
    ],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc5786/",
    "html": "https://www.rfc-editor.org/rfc/rfc5786.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc5786.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc5786/"
  }
}