⌕ Поиск по атласу

IETF · RFC · RFC5826

RFC5826 · Home Automation Routing Requirements in Low-Power and Lossy Networks

Home Automation Routing Requirements in Low-Power and Lossy Networks

This document presents requirements specific to home control and automation applications for Routing Over Low power and Lossy (ROLL) networks. In the near future, many homes will contain high numbers of wireless devices for a wide set of purposes. Examples include actuators (relay, light dimmer, heating valve), sensors (wall switch, water leak, blood pressure), and advanced controllers (radio-frequency-based AV remote control, central server for light and heat control). Because such devices only cover a limited radio range, routing is often required. The aim of this document is to specify the routing requirements for networks comprising such constrained devices in a home-control and automation environment. This document is not an Internet Standards Track specification; it is published for informational purposes.

Официальная английская аннотация

This document presents requirements specific to home control and automation applications for Routing Over Low power and Lossy (ROLL) networks. In the near future, many homes will contain high numbers of wireless devices for a wide set of purposes. Examples include actuators (relay, light dimmer, heating valve), sensors (wall switch, water leak, blood pressure), and advanced controllers (radio-frequency-based AV remote control, central server for light and heat control). Because such devices only cover a limited radio range, routing is often required. The aim of this document is to specify the routing requirements for networks comprising such constrained devices in a home-control and automation environment. This document is not an Internet Standards Track specification; it is published for informational purposes.

Связи документа

Официальный источник · 2010-04-01

Полные импортированные сведения карточки
{
  "id": "RFC5826",
  "number": 5826,
  "title_en": "Home Automation Routing Requirements in Low-Power and Lossy Networks",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "This document presents requirements specific to home control and automation applications for Routing Over Low power and Lossy (ROLL) networks. In the near future, many homes will contain high numbers of wireless devices for a wide set of purposes. Examples include actuators (relay, light dimmer, heating valve), sensors (wall switch, water leak, blood pressure), and advanced controllers (radio-frequency-based AV remote control, central server for light and heat control). Because such devices only cover a limited radio range, routing is often required. The aim of this document is to specify the routing requirements for networks comprising such constrained devices in a home-control and automation environment. This document is not an Internet Standards Track specification; it is published for informational purposes.",
  "authors": [
    "A. Brandt",
    "J. Buron",
    "G. Porcu"
  ],
  "organizations": [],
  "publication_date": "2010-04-01",
  "current_status": "INFORMATIONAL",
  "current_status_ru": "Информационный",
  "publication_status": "INFORMATIONAL",
  "publication_status_ru": "Информационный",
  "lifecycle": "informational",
  "lifecycle_ru": "Справочный",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "roll",
  "source_draft": "draft-ietf-roll-home-routing-reqs-11",
  "page_count": 17,
  "doi": "10.17487/RFC5826",
  "keywords": [
    "roll",
    "routing over low power and lossy"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc5826/",
    "html": "https://www.rfc-editor.org/rfc/rfc5826.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc5826.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc5826/"
  }
}