⌕ Поиск по атласу

IETF · RFC · RFC5938

RFC5938 · Individual Session Control Feature for the Two-Way Active Measurement Protocol (TWAMP)

Individual Session Control Feature for the Two-Way Active Measurement Protocol (TWAMP)

The IETF has completed its work on the core specification of TWAMP -- the Two-Way Active Measurement Protocol. This memo describes an OPTIONAL feature for TWAMP, that gives the controlling host the ability to start and stop one or more individual test sessions using Session Identifiers. The base capability of the TWAMP protocol requires all test sessions that were previously requested and accepted to start and stop at the same time. [STANDARDS-TRACK]

Официальная английская аннотация

The IETF has completed its work on the core specification of TWAMP -- the Two-Way Active Measurement Protocol. This memo describes an OPTIONAL feature for TWAMP, that gives the controlling host the ability to start and stop one or more individual test sessions using Session Identifiers. The base capability of the TWAMP protocol requires all test sessions that were previously requested and accepted to start and stop at the same time. [STANDARDS-TRACK]

Связи документа

updates: RFC5357

Официальный источник · 2010-08-01

Полные импортированные сведения карточки
{
  "id": "RFC5938",
  "number": 5938,
  "title_en": "Individual Session Control Feature for the Two-Way Active Measurement Protocol (TWAMP)",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "The IETF has completed its work on the core specification of TWAMP -- the Two-Way Active Measurement Protocol. This memo describes an OPTIONAL feature for TWAMP, that gives the controlling host the ability to start and stop one or more individual test sessions using Session Identifiers. The base capability of the TWAMP protocol requires all test sessions that were previously requested and accepted to start and stop at the same time. [STANDARDS-TRACK]",
  "authors": [
    "A. Morton",
    "M. Chiba"
  ],
  "organizations": [],
  "publication_date": "2010-08-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "ops",
  "area_ru": "Эксплуатация и управление",
  "working_group": "ippm",
  "source_draft": "draft-ietf-ippm-twamp-session-cntrl-07",
  "page_count": 17,
  "doi": "10.17487/RFC5938",
  "keywords": [],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [
      "RFC5357"
    ],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc5938/",
    "html": "https://www.rfc-editor.org/rfc/rfc5938.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc5938.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc5938/"
  }
}