⌕ Поиск по атласу

IETF · RFC · RFC6006

RFC6006 · Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths

Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths

Point-to-point Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineering Label Switched Paths (TE LSPs) may be established using signaling techniques, but their paths may first need to be determined. The Path Computation Element (PCE) has been identified as an appropriate technology for the determination of the paths of point-to-multipoint (P2MP) TE LSPs. This document describes extensions to the PCE communication Protocol (PCEP) to handle requests and responses for the computation of paths for P2MP TE LSPs. [STANDARDS-TRACK]

Официальная английская аннотация

Point-to-point Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineering Label Switched Paths (TE LSPs) may be established using signaling techniques, but their paths may first need to be determined. The Path Computation Element (PCE) has been identified as an appropriate technology for the determination of the paths of point-to-multipoint (P2MP) TE LSPs. This document describes extensions to the PCE communication Protocol (PCEP) to handle requests and responses for the computation of paths for P2MP TE LSPs. [STANDARDS-TRACK]

Связи документа

obsoleted_by: RFC8306

Официальный источник · 2010-09-01

Полные импортированные сведения карточки
{
  "id": "RFC6006",
  "number": 6006,
  "title_en": "Extensions to the Path Computation Element Communication Protocol (PCEP) for Point-to-Multipoint Traffic Engineering Label Switched Paths",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "Point-to-point Multiprotocol Label Switching (MPLS) and Generalized MPLS (GMPLS) Traffic Engineering Label Switched Paths (TE LSPs) may be established using signaling techniques, but their paths may first need to be determined. The Path Computation Element (PCE) has been identified as an appropriate technology for the determination of the paths of point-to-multipoint (P2MP) TE LSPs. This document describes extensions to the PCE communication Protocol (PCEP) to handle requests and responses for the computation of paths for P2MP TE LSPs. [STANDARDS-TRACK]",
  "authors": [
    "Q. Zhao",
    "D. King",
    "F. Verhaeghe",
    "T. Takeda",
    "Z. Ali",
    "J. Meuric"
  ],
  "organizations": [],
  "publication_date": "2010-09-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "superseded",
  "lifecycle_ru": "Заменён",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "pce",
  "source_draft": "draft-ietf-pce-pcep-p2mp-extensions-11",
  "page_count": 33,
  "doi": "10.17487/RFC6006",
  "keywords": [
    "END-POINTS",
    "fragmentation"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [
      "RFC8306"
    ],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc6006/",
    "html": "https://www.rfc-editor.org/rfc/rfc6006.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc6006.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc6006/"
  }
}