This document specifies the Intermediate System to Intermediate System (IS-IS) extensions necessary to support link state routing for any protocols running directly over Layer-2. While supporting this concept involves several pieces, this document only describes extensions to IS-IS. Furthermore, the Type, Length, Value pairs (TLVs) described in this document are generic Layer-2 additions, and specific ones as needed are defined in the IS-IS technology-specific extensions. We leave it to the systems using these IS-IS extensions to explain how the information carried in IS-IS is used. [STANDARDS- TRACK]
IETF · RFCОфициальная английская аннотация
This document specifies the Intermediate System to Intermediate System (IS-IS) extensions necessary to support link state routing for any protocols running directly over Layer-2. While supporting this concept involves several pieces, this document only describes extensions to IS-IS. Furthermore, the Type, Length, Value pairs (TLVs) described in this document are generic Layer-2 additions, and specific ones as needed are defined in the IS-IS technology-specific extensions. We leave it to the systems using these IS-IS extensions to explain how the information carried in IS-IS is used. [STANDARDS- TRACK]
{
"id": "RFC6165",
"number": 6165,
"title_en": "Extensions to IS-IS for Layer-2 Systems",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "This document specifies the Intermediate System to Intermediate System (IS-IS) extensions necessary to support link state routing for any protocols running directly over Layer-2. While supporting this concept involves several pieces, this document only describes extensions to IS-IS. Furthermore, the Type, Length, Value pairs (TLVs) described in this document are generic Layer-2 additions, and specific ones as needed are defined in the IS-IS technology-specific extensions. We leave it to the systems using these IS-IS extensions to explain how the information carried in IS-IS is used. [STANDARDS- TRACK]",
"authors": [
"A. Banerjee",
"D. Ward"
],
"organizations": [],
"publication_date": "2011-04-01",
"current_status": "PROPOSED STANDARD",
"current_status_ru": "Предлагаемый стандарт",
"publication_status": "PROPOSED STANDARD",
"publication_status_ru": "Предлагаемый стандарт",
"lifecycle": "active",
"lifecycle_ru": "Действующий",
"stream": "IETF",
"stream_ru": "IETF",
"area": "rtg",
"area_ru": "Маршрутизация",
"working_group": "isis",
"source_draft": "draft-ietf-isis-layer2-11",
"page_count": 7,
"doi": "10.17487/RFC6165",
"keywords": [
"Intermediate System to Intermediate System"
],
"formats": [
"TXT",
"HTML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [],
"updates": [],
"updated_by": [],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc6165/",
"html": "https://www.rfc-editor.org/rfc/rfc6165.html",
"txt": "https://www.rfc-editor.org/rfc/rfc6165.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc6165/"
}
}