⌕ Поиск по атласу

IETF · RFC · RFC7167

RFC7167 · A Framework for Point-to-Multipoint MPLS in Transport Networks

A Framework for Point-to-Multipoint MPLS in Transport Networks

The Multiprotocol Label Switching Transport Profile (MPLS-TP) is the common set of MPLS protocol functions defined to enable the construction and operation of packet transport networks. The MPLS-TP supports both point-to-point and point-to-multipoint transport paths. This document defines the elements and functions of the MPLS-TP architecture that are applicable specifically to supporting point-to-multipoint transport paths.

Официальная английская аннотация

The Multiprotocol Label Switching Transport Profile (MPLS-TP) is the common set of MPLS protocol functions defined to enable the construction and operation of packet transport networks. The MPLS-TP supports both point-to-point and point-to-multipoint transport paths. This document defines the elements and functions of the MPLS-TP architecture that are applicable specifically to supporting point-to-multipoint transport paths.

Связи документа

Официальный источник · 2014-04-01

Полные импортированные сведения карточки
{
  "id": "RFC7167",
  "number": 7167,
  "title_en": "A Framework for Point-to-Multipoint MPLS in Transport Networks",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "The Multiprotocol Label Switching Transport Profile (MPLS-TP) is the common set of MPLS protocol functions defined to enable the construction and operation of packet transport networks. The MPLS-TP supports both point-to-point and point-to-multipoint transport paths. This document defines the elements and functions of the MPLS-TP architecture that are applicable specifically to supporting point-to-multipoint transport paths.",
  "authors": [
    "D. Frost",
    "S. Bryant",
    "M. Bocci",
    "L. Berger"
  ],
  "organizations": [],
  "publication_date": "2014-04-01",
  "current_status": "INFORMATIONAL",
  "current_status_ru": "Информационный",
  "publication_status": "INFORMATIONAL",
  "publication_status_ru": "Информационный",
  "lifecycle": "informational",
  "lifecycle_ru": "Справочный",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "mpls",
  "source_draft": "draft-ietf-mpls-tp-p2mp-framework-06",
  "page_count": 12,
  "doi": "10.17487/RFC7167",
  "keywords": [
    "mpls-tp",
    "mpls"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc7167/",
    "html": "https://www.rfc-editor.org/rfc/rfc7167.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc7167.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc7167/"
  }
}