RFC7774 · Multicast Protocol for Low-Power and Lossy Networks (MPL) Parameter Configuration Option for DHCPv6
Multicast Protocol for Low-Power and Lossy Networks (MPL) Parameter Configuration Option for DHCPv6
This document defines a way to configure a parameter set for MPL (Multicast Protocol for Low-Power and Lossy Networks) via a DHCPv6 option. MPL has a set of parameters to control its behavior, and the parameter set is often configured as a network-wide parameter because the parameter set should be identical for each MPL Forwarder in an MPL Domain. Using the MPL Parameter Configuration Option defined in this document, a network can easily be configured with a single set of MPL parameters.
IETF · RFCОфициальная английская аннотация
This document defines a way to configure a parameter set for MPL (Multicast Protocol for Low-Power and Lossy Networks) via a DHCPv6 option. MPL has a set of parameters to control its behavior, and the parameter set is often configured as a network-wide parameter because the parameter set should be identical for each MPL Forwarder in an MPL Domain. Using the MPL Parameter Configuration Option defined in this document, a network can easily be configured with a single set of MPL parameters.
{
"id": "RFC7774",
"number": 7774,
"title_en": "Multicast Protocol for Low-Power and Lossy Networks (MPL) Parameter Configuration Option for DHCPv6",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "This document defines a way to configure a parameter set for MPL (Multicast Protocol for Low-Power and Lossy Networks) via a DHCPv6 option. MPL has a set of parameters to control its behavior, and the parameter set is often configured as a network-wide parameter because the parameter set should be identical for each MPL Forwarder in an MPL Domain. Using the MPL Parameter Configuration Option defined in this document, a network can easily be configured with a single set of MPL parameters.",
"authors": [
"Y. Doi",
"M. Gillmore"
],
"organizations": [],
"publication_date": "2016-03-01",
"current_status": "PROPOSED STANDARD",
"current_status_ru": "Предлагаемый стандарт",
"publication_status": "PROPOSED STANDARD",
"publication_status_ru": "Предлагаемый стандарт",
"lifecycle": "active",
"lifecycle_ru": "Действующий",
"stream": "IETF",
"stream_ru": "IETF",
"area": "rtg",
"area_ru": "Маршрутизация",
"working_group": "roll",
"source_draft": "draft-ietf-roll-mpl-parameter-configuration-08",
"page_count": 10,
"doi": "10.17487/RFC7774",
"keywords": [
"MPL",
"DHCPv6"
],
"formats": [
"TXT",
"HTML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [],
"updates": [],
"updated_by": [],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc7774/",
"html": "https://www.rfc-editor.org/rfc/rfc7774.html",
"txt": "https://www.rfc-editor.org/rfc/rfc7774.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc7774/"
}
}