⌕ Поиск по атласу

IETF · RFC · RFC8383

RFC8383 · Transparent Interconnection of Lots of Links (TRILL): Address Flush Message

Transparent Interconnection of Lots of Links (TRILL): Address Flush Message

The TRILL (Transparent Interconnection of Lots of Links) protocol, by default, learns end station addresses from observing the data plane. In particular, it learns local Media Access Control (MAC) addresses and the edge switch port of attachment from the receipt of local data frames and learns remote MAC addresses and the edge switch port of attachment from the decapsulation of remotely sourced TRILL Data packets. This document specifies a message by which a TRILL switch can explicitly request other TRILL switches to flush certain MAC reachability learned through the decapsulation of TRILL Data packets. This is a supplement to the TRILL automatic address forgetting (see Section 4.8.3 of RFC 6325) and can assist in achieving more rapid convergence in case of topology or configuration change.

Официальная английская аннотация

The TRILL (Transparent Interconnection of Lots of Links) protocol, by default, learns end station addresses from observing the data plane. In particular, it learns local Media Access Control (MAC) addresses and the edge switch port of attachment from the receipt of local data frames and learns remote MAC addresses and the edge switch port of attachment from the decapsulation of remotely sourced TRILL Data packets. This document specifies a message by which a TRILL switch can explicitly request other TRILL switches to flush certain MAC reachability learned through the decapsulation of TRILL Data packets. This is a supplement to the TRILL automatic address forgetting (see Section 4.8.3 of RFC 6325) and can assist in achieving more rapid convergence in case of topology or configuration change.

Связи документа

Официальный источник · 2018-05-01

Полные импортированные сведения карточки
{
  "id": "RFC8383",
  "number": 8383,
  "title_en": "Transparent Interconnection of Lots of Links (TRILL): Address Flush Message",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "The TRILL (Transparent Interconnection of Lots of Links) protocol, by default, learns end station addresses from observing the data plane. In particular, it learns local Media Access Control (MAC) addresses and the edge switch port of attachment from the receipt of local data frames and learns remote MAC addresses and the edge switch port of attachment from the decapsulation of remotely sourced TRILL Data packets. This document specifies a message by which a TRILL switch can explicitly request other TRILL switches to flush certain MAC reachability learned through the decapsulation of TRILL Data packets. This is a supplement to the TRILL automatic address forgetting (see Section 4.8.3 of RFC 6325) and can assist in achieving more rapid convergence in case of topology or configuration change.",
  "authors": [
    "W. Hao",
    "D. Eastlake 3rd",
    "Y. Li",
    "M. Umair"
  ],
  "organizations": [],
  "publication_date": "2018-05-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "trill",
  "source_draft": "draft-ietf-trill-address-flush-06",
  "page_count": 20,
  "doi": "10.17487/RFC8383",
  "keywords": [
    "convergence",
    "VLAN",
    "data label",
    "FGL"
  ],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc8383/",
    "html": "https://www.rfc-editor.org/rfc/rfc8383.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc8383.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc8383/"
  }
}