⌕ Поиск по атласу

IETF · RFC · RFC8408

RFC8408 · Conveying Path Setup Type in PCE Communication Protocol (PCEP) Messages

Conveying Path Setup Type in PCE Communication Protocol (PCEP) Messages

A Path Computation Element (PCE) can compute Traffic Engineering (TE) paths through a network; these paths are subject to various constraints. Currently, TE paths are Label Switched Paths (LSPs) that are set up using the RSVP-TE signaling protocol. However, other TE path setup methods are possible within the PCE architecture. This document proposes an extension to the PCE Communication Protocol (PCEP) to allow support for different path setup methods over a given PCEP session.

Официальная английская аннотация

A Path Computation Element (PCE) can compute Traffic Engineering (TE) paths through a network; these paths are subject to various constraints. Currently, TE paths are Label Switched Paths (LSPs) that are set up using the RSVP-TE signaling protocol. However, other TE path setup methods are possible within the PCE architecture. This document proposes an extension to the PCE Communication Protocol (PCEP) to allow support for different path setup methods over a given PCEP session.

Связи документа

updated_by: RFC8664

Официальный источник · 2018-07-01

Полные импортированные сведения карточки
{
  "id": "RFC8408",
  "number": 8408,
  "title_en": "Conveying Path Setup Type in PCE Communication Protocol (PCEP) Messages",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "A Path Computation Element (PCE) can compute Traffic Engineering (TE) paths through a network; these paths are subject to various constraints. Currently, TE paths are Label Switched Paths (LSPs) that are set up using the RSVP-TE signaling protocol. However, other TE path setup methods are possible within the PCE architecture. This document proposes an extension to the PCE Communication Protocol (PCEP) to allow support for different path setup methods over a given PCEP session.",
  "authors": [
    "S. Sivabalan",
    "J. Tantsura",
    "I. Minei",
    "R. Varga",
    "J. Hardwick"
  ],
  "organizations": [],
  "publication_date": "2018-07-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "pce",
  "source_draft": "draft-ietf-pce-lsp-setup-type-10",
  "page_count": 12,
  "doi": "10.17487/RFC8408",
  "keywords": [],
  "formats": [
    "TXT",
    "HTML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [
      "RFC8664"
    ],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc8408/",
    "html": "https://www.rfc-editor.org/rfc/rfc8408.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc8408.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc8408/"
  }
}