⌕ Поиск по атласу

IETF · RFC · RFC8986

RFC8986 · Segment Routing over IPv6 (SRv6) Network Programming

Segment Routing over IPv6 (SRv6) Network Programming

The Segment Routing over IPv6 (SRv6) Network Programming framework enables a network operator or an application to specify a packet processing program by encoding a sequence of instructions in the IPv6 packet header. Each instruction is implemented on one or several nodes in the network and identified by an SRv6 Segment Identifier in the packet. This document defines the SRv6 Network Programming concept and specifies the base set of SRv6 behaviors that enables the creation of interoperable overlays with underlay optimization.

Официальная английская аннотация

The Segment Routing over IPv6 (SRv6) Network Programming framework enables a network operator or an application to specify a packet processing program by encoding a sequence of instructions in the IPv6 packet header. Each instruction is implemented on one or several nodes in the network and identified by an SRv6 Segment Identifier in the packet. This document defines the SRv6 Network Programming concept and specifies the base set of SRv6 behaviors that enables the creation of interoperable overlays with underlay optimization.

Связи документа

Официальный источник · 2021-02-01

Полные импортированные сведения карточки
{
  "id": "RFC8986",
  "number": 8986,
  "title_en": "Segment Routing over IPv6 (SRv6) Network Programming",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "The Segment Routing over IPv6 (SRv6) Network Programming framework enables a network operator or an application to specify a packet processing program by encoding a sequence of instructions in the IPv6 packet header. Each instruction is implemented on one or several nodes in the network and identified by an SRv6 Segment Identifier in the packet. This document defines the SRv6 Network Programming concept and specifies the base set of SRv6 behaviors that enables the creation of interoperable overlays with underlay optimization.",
  "authors": [
    "C. Filsfils",
    "P. Camarillo",
    "J. Leddy",
    "D. Voyer",
    "S. Matsushima",
    "Z. Li"
  ],
  "organizations": [],
  "publication_date": "2021-02-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "spring",
  "source_draft": "draft-ietf-spring-srv6-network-programming-28",
  "page_count": 40,
  "doi": "10.17487/RFC8986",
  "keywords": [
    "SRv6",
    "Segment Routing",
    "IPv6 Segment Routing"
  ],
  "formats": [
    "HTML",
    "TXT",
    "PDF",
    "XML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc8986/",
    "html": "https://www.rfc-editor.org/rfc/rfc8986.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc8986.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc8986/"
  }
}