⌕ Поиск по атласу

IETF · RFC · RFC9300

RFC9300 · The Locator/ID Separation Protocol (LISP)

The Locator/ID Separation Protocol (LISP)

This document describes the data plane protocol for the Locator/ID Separation Protocol (LISP). LISP defines two namespaces: Endpoint Identifiers (EIDs), which identify end hosts; and Routing Locators (RLOCs), which identify network attachment points. With this, LISP effectively separates control from data and allows routers to create overlay networks. LISP-capable routers exchange encapsulated packets according to EID-to-RLOC mappings stored in a local Map-Cache. LISP requires no change to either host protocol stacks or underlay routers and offers Traffic Engineering (TE), multihoming, and mobility, among other features. This document obsoletes RFC 6830.

Официальная английская аннотация

This document describes the data plane protocol for the Locator/ID Separation Protocol (LISP). LISP defines two namespaces: Endpoint Identifiers (EIDs), which identify end hosts; and Routing Locators (RLOCs), which identify network attachment points. With this, LISP effectively separates control from data and allows routers to create overlay networks. LISP-capable routers exchange encapsulated packets according to EID-to-RLOC mappings stored in a local Map-Cache. LISP requires no change to either host protocol stacks or underlay routers and offers Traffic Engineering (TE), multihoming, and mobility, among other features. This document obsoletes RFC 6830.

Связи документа

obsoletes: RFC6830

Официальный источник · 2022-10-01

Полные импортированные сведения карточки
{
  "id": "RFC9300",
  "number": 9300,
  "title_en": "The Locator/ID Separation Protocol (LISP)",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "This document describes the data plane protocol for the Locator/ID Separation Protocol (LISP). LISP defines two namespaces: Endpoint Identifiers (EIDs), which identify end hosts; and Routing Locators (RLOCs), which identify network attachment points. With this, LISP effectively separates control from data and allows routers to create overlay networks. LISP-capable routers exchange encapsulated packets according to EID-to-RLOC mappings stored in a local Map-Cache. LISP requires no change to either host protocol stacks or underlay routers and offers Traffic Engineering (TE), multihoming, and mobility, among other features. This document obsoletes RFC 6830.",
  "authors": [
    "D. Farinacci",
    "V. Fuller",
    "D. Meyer",
    "D. Lewis",
    "A. Cabellos"
  ],
  "organizations": [],
  "publication_date": "2022-10-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "lisp",
  "source_draft": "draft-ietf-lisp-rfc6830bis-38",
  "page_count": 33,
  "doi": "10.17487/RFC9300",
  "keywords": [
    "LISP data plane"
  ],
  "formats": [
    "HTML",
    "TXT",
    "PDF",
    "XML"
  ],
  "relations": {
    "obsoletes": [
      "RFC6830"
    ],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc9300/",
    "html": "https://www.rfc-editor.org/rfc/rfc9300.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc9300.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc9300/"
  }
}