⌕ Поиск по атласу

IETF · RFC · RFC9339

RFC9339 · OSPF Reverse Metric

OSPF Reverse Metric

This document specifies the extensions to OSPF that enable a router to use Link-Local Signaling (LLS) to signal the metric that receiving OSPF neighbor(s) should use for a link to the signaling router. When used on the link to the signaling router, the signaling of this reverse metric (RM) allows a router to influence the amount of traffic flowing towards itself. In certain use cases, this enables routers to maintain symmetric metrics on both sides of a link between them.

Официальная английская аннотация

This document specifies the extensions to OSPF that enable a router to use Link-Local Signaling (LLS) to signal the metric that receiving OSPF neighbor(s) should use for a link to the signaling router. When used on the link to the signaling router, the signaling of this reverse metric (RM) allows a router to influence the amount of traffic flowing towards itself. In certain use cases, this enables routers to maintain symmetric metrics on both sides of a link between them.

Связи документа

Официальный источник · 2022-12-01

Полные импортированные сведения карточки
{
  "id": "RFC9339",
  "number": 9339,
  "title_en": "OSPF Reverse Metric",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "This document specifies the extensions to OSPF that enable a router to use Link-Local Signaling (LLS) to signal the metric that receiving OSPF neighbor(s) should use for a link to the signaling router. When used on the link to the signaling router, the signaling of this reverse metric (RM) allows a router to influence the amount of traffic flowing towards itself. In certain use cases, this enables routers to maintain symmetric metrics on both sides of a link between them.",
  "authors": [
    "K. Talaulikar",
    "P. Psenak",
    "H. Johnston"
  ],
  "organizations": [],
  "publication_date": "2022-12-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "lsr",
  "source_draft": "draft-ietf-lsr-ospf-reverse-metric-13",
  "page_count": 11,
  "doi": "10.17487/RFC9339",
  "keywords": [
    "IGP",
    "OSPF"
  ],
  "formats": [
    "HTML",
    "TXT",
    "PDF",
    "XML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc9339/",
    "html": "https://www.rfc-editor.org/rfc/rfc9339.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc9339.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc9339/"
  }
}