RFC9545 · Path Segment Identifier in MPLS-Based Segment Routing Networks
Path Segment Identifier in MPLS-Based Segment Routing Networks
A Segment Routing (SR) path is identified by an SR segment list. A subset of segments from the segment list cannot be leveraged to distinguish one SR path from another as they may be partially congruent. SR path identification is a prerequisite for various use cases such as performance measurement and end-to-end 1+1 path protection. In an SR over MPLS (SR-MPLS) data plane, an egress node cannot determine on which SR path a packet traversed the network from the label stack because the segment identifiers are removed from the label stack as the packet transits the network. This document defines a Path Segment Identifier (PSID) to identify an SR path on the egress node of the path.
IETF · RFCОфициальная английская аннотация
A Segment Routing (SR) path is identified by an SR segment list. A subset of segments from the segment list cannot be leveraged to distinguish one SR path from another as they may be partially congruent. SR path identification is a prerequisite for various use cases such as performance measurement and end-to-end 1+1 path protection. In an SR over MPLS (SR-MPLS) data plane, an egress node cannot determine on which SR path a packet traversed the network from the label stack because the segment identifiers are removed from the label stack as the packet transits the network. This document defines a Path Segment Identifier (PSID) to identify an SR path on the egress node of the path.
{
"id": "RFC9545",
"number": 9545,
"title_en": "Path Segment Identifier in MPLS-Based Segment Routing Networks",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "A Segment Routing (SR) path is identified by an SR segment list. A subset of segments from the segment list cannot be leveraged to distinguish one SR path from another as they may be partially congruent. SR path identification is a prerequisite for various use cases such as performance measurement and end-to-end 1+1 path protection. In an SR over MPLS (SR-MPLS) data plane, an egress node cannot determine on which SR path a packet traversed the network from the label stack because the segment identifiers are removed from the label stack as the packet transits the network. This document defines a Path Segment Identifier (PSID) to identify an SR path on the egress node of the path.",
"authors": [
"W. Cheng",
"H. Li",
"C. Li",
"R. Gandhi",
"R. Zigler"
],
"organizations": [],
"publication_date": "2024-02-01",
"current_status": "PROPOSED STANDARD",
"current_status_ru": "Предлагаемый стандарт",
"publication_status": "PROPOSED STANDARD",
"publication_status_ru": "Предлагаемый стандарт",
"lifecycle": "active",
"lifecycle_ru": "Действующий",
"stream": "IETF",
"stream_ru": "IETF",
"area": "rtg",
"area_ru": "Маршрутизация",
"working_group": "spring",
"source_draft": "draft-ietf-spring-mpls-path-segment-22",
"page_count": 11,
"doi": "10.17487/RFC9545",
"keywords": [
"Performance Measurement",
"Bidirectional SR Path",
"End-to-End Path Protection",
"SR Path Segment",
"Path Segment"
],
"formats": [
"HTML",
"TXT",
"PDF",
"XML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [],
"updates": [],
"updated_by": [],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc9545/",
"html": "https://www.rfc-editor.org/rfc/rfc9545.html",
"txt": "https://www.rfc-editor.org/rfc/rfc9545.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc9545/"
}
}