RFC9603 · Path Computation Element Communication Protocol (PCEP) Extensions for IPv6 Segment Routing
Path Computation Element Communication Protocol (PCEP) Extensions for IPv6 Segment Routing
Segment Routing (SR) can be used to steer packets through a network using the IPv6 or MPLS data plane, employing the source routing paradigm. An SR Path can be derived from a variety of mechanisms, including an IGP Shortest Path Tree (SPT), explicit configuration, or a Path Computation Element (PCE). Since SR can be applied to both MPLS and IPv6 data planes, a PCE should be able to compute an SR Path for both MPLS and IPv6 data planes. The Path Computation Element Communication Protocol (PCEP) extension and mechanisms to support SR-MPLS have been defined. This document outlines the necessary extensions to support SR for the IPv6 data plane within PCEP.
IETF · RFCОфициальная английская аннотация
Segment Routing (SR) can be used to steer packets through a network using the IPv6 or MPLS data plane, employing the source routing paradigm. An SR Path can be derived from a variety of mechanisms, including an IGP Shortest Path Tree (SPT), explicit configuration, or a Path Computation Element (PCE). Since SR can be applied to both MPLS and IPv6 data planes, a PCE should be able to compute an SR Path for both MPLS and IPv6 data planes. The Path Computation Element Communication Protocol (PCEP) extension and mechanisms to support SR-MPLS have been defined. This document outlines the necessary extensions to support SR for the IPv6 data plane within PCEP.
{
"id": "RFC9603",
"number": 9603,
"title_en": "Path Computation Element Communication Protocol (PCEP) Extensions for IPv6 Segment Routing",
"title_ru": "",
"summary_ru": "",
"purpose_ru": "",
"use_ru": "",
"full_translation_path": "",
"full_translation_checked_at": "",
"full_translation_source_sha256": "",
"architect_note_ru": "",
"topics_ru": [],
"translation_state": "not_prepared",
"verification_level": "not_prepared",
"verification_level_ru": "Русская выжимка не подготовлена",
"verification_note_ru": "",
"abstract_en": "Segment Routing (SR) can be used to steer packets through a network using the IPv6 or MPLS data plane, employing the source routing paradigm. An SR Path can be derived from a variety of mechanisms, including an IGP Shortest Path Tree (SPT), explicit configuration, or a Path Computation Element (PCE). Since SR can be applied to both MPLS and IPv6 data planes, a PCE should be able to compute an SR Path for both MPLS and IPv6 data planes. The Path Computation Element Communication Protocol (PCEP) extension and mechanisms to support SR-MPLS have been defined. This document outlines the necessary extensions to support SR for the IPv6 data plane within PCEP.",
"authors": [
"C. Li",
"P. Kaladharan",
"S. Sivabalan",
"M. Koldychev",
"Y. Zhu"
],
"organizations": [],
"publication_date": "2024-07-01",
"current_status": "PROPOSED STANDARD",
"current_status_ru": "Предлагаемый стандарт",
"publication_status": "PROPOSED STANDARD",
"publication_status_ru": "Предлагаемый стандарт",
"lifecycle": "active",
"lifecycle_ru": "Действующий",
"stream": "IETF",
"stream_ru": "IETF",
"area": "rtg",
"area_ru": "Маршрутизация",
"working_group": "pce",
"source_draft": "draft-ietf-pce-segment-routing-ipv6-25",
"page_count": 23,
"doi": "10.17487/RFC9603",
"keywords": [
"PCEP",
"SRv6",
"IPv6"
],
"formats": [
"HTML",
"TXT",
"PDF",
"XML"
],
"relations": {
"obsoletes": [],
"obsoleted_by": [],
"updates": [],
"updated_by": [
"RFC9756",
"RFC9933"
],
"is_also": [],
"see_also": []
},
"links": {
"info": "https://www.rfc-editor.org/info/rfc9603/",
"html": "https://www.rfc-editor.org/rfc/rfc9603.html",
"txt": "https://www.rfc-editor.org/rfc/rfc9603.txt",
"datatracker": "https://datatracker.ietf.org/doc/rfc9603/"
}
}