⌕ Поиск по атласу

IETF · RFC · RFC9884

RFC9884 · Label Switched Path Ping for Segment Routing Path Segment Identifier with MPLS Data Plane

Label Switched Path Ping for Segment Routing Path Segment Identifier with MPLS Data Plane

Segment Routing (SR) leverages source routing to steer packets through an ordered list of instructions called "segments". SR can be instantiated over the MPLS data plane. Path Segment Identifiers (PSIDs) are used to identify and correlate bidirectional or end-to-end paths in SR networks. This document defines procedures (i.e., six new Target Forwarding Equivalence Class (FEC) Stack sub-TLVs) for the use of LSP Ping to support connectivity verification and fault isolation for SR paths that include PSIDs. The mechanisms described enable the validation and tracing of SR paths with Path SIDs in MPLS networks, complementing existing SR-MPLS Operations, Administration, and Maintenance (OAM) capabilities.

Официальная английская аннотация

Segment Routing (SR) leverages source routing to steer packets through an ordered list of instructions called "segments". SR can be instantiated over the MPLS data plane. Path Segment Identifiers (PSIDs) are used to identify and correlate bidirectional or end-to-end paths in SR networks. This document defines procedures (i.e., six new Target Forwarding Equivalence Class (FEC) Stack sub-TLVs) for the use of LSP Ping to support connectivity verification and fault isolation for SR paths that include PSIDs. The mechanisms described enable the validation and tracing of SR paths with Path SIDs in MPLS networks, complementing existing SR-MPLS Operations, Administration, and Maintenance (OAM) capabilities.

Связи документа

Официальный источник · 2025-10-01

Полные импортированные сведения карточки
{
  "id": "RFC9884",
  "number": 9884,
  "title_en": "Label Switched Path Ping for Segment Routing Path Segment Identifier with MPLS Data Plane",
  "title_ru": "",
  "summary_ru": "",
  "purpose_ru": "",
  "use_ru": "",
  "full_translation_path": "",
  "full_translation_checked_at": "",
  "full_translation_source_sha256": "",
  "architect_note_ru": "",
  "topics_ru": [],
  "translation_state": "not_prepared",
  "verification_level": "not_prepared",
  "verification_level_ru": "Русская выжимка не подготовлена",
  "verification_note_ru": "",
  "abstract_en": "Segment Routing (SR) leverages source routing to steer packets through an ordered list of instructions called \"segments\". SR can be instantiated over the MPLS data plane. Path Segment Identifiers (PSIDs) are used to identify and correlate bidirectional or end-to-end paths in SR networks. This document defines procedures (i.e., six new Target Forwarding Equivalence Class (FEC) Stack sub-TLVs) for the use of LSP Ping to support connectivity verification and fault isolation for SR paths that include PSIDs. The mechanisms described enable the validation and tracing of SR paths with Path SIDs in MPLS networks, complementing existing SR-MPLS Operations, Administration, and Maintenance (OAM) capabilities.",
  "authors": [
    "X. Min",
    "S. Peng",
    "L. Gong",
    "R. Gandhi",
    "C. Pignataro"
  ],
  "organizations": [],
  "publication_date": "2025-10-01",
  "current_status": "PROPOSED STANDARD",
  "current_status_ru": "Предлагаемый стандарт",
  "publication_status": "PROPOSED STANDARD",
  "publication_status_ru": "Предлагаемый стандарт",
  "lifecycle": "active",
  "lifecycle_ru": "Действующий",
  "stream": "IETF",
  "stream_ru": "IETF",
  "area": "rtg",
  "area_ru": "Маршрутизация",
  "working_group": "mpls",
  "source_draft": "draft-ietf-mpls-spring-lsp-ping-path-sid-13",
  "page_count": 19,
  "doi": "10.17487/RFC9884",
  "keywords": [
    "Target FEC Stack",
    "PSID"
  ],
  "formats": [
    "HTML",
    "TXT",
    "PDF",
    "XML"
  ],
  "relations": {
    "obsoletes": [],
    "obsoleted_by": [],
    "updates": [],
    "updated_by": [],
    "is_also": [],
    "see_also": []
  },
  "links": {
    "info": "https://www.rfc-editor.org/info/rfc9884/",
    "html": "https://www.rfc-editor.org/rfc/rfc9884.html",
    "txt": "https://www.rfc-editor.org/rfc/rfc9884.txt",
    "datatracker": "https://datatracker.ietf.org/doc/rfc9884/"
  }
}