Objective Function Zero for the Routing Protocol for Low-Power and Lossy Networks (RPL)
The Routing Protocol for Low-Power and Lossy Networks (RPL) specification defines a generic Distance Vector protocol that is adapted to a variety of network types by the application of specific Objective Functions (OFs). An OF states the outcome of the process used by a RPL node to select and optimize routes within a RPL Instance based on the Information Objects available; an OF is not an algorith…
Routing Metrics Used for Path Calculation in Low-Power and Lossy Networks
Low-Power and Lossy Networks (LLNs) have unique characteristics compared with traditional wired and ad hoc networks that require the specification of new routing metrics and constraints. By contrast, with typical Interior Gateway Protocol (IGP) routing metrics using hop counts or link metrics, this document specifies a set of link and node routing metrics and constraints suitable to LLNs to be use…
RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks
Low-Power and Lossy Networks (LLNs) are a class of network in which both the routers and their interconnect are constrained. LLN routers typically operate with constraints on processing power, memory, and energy (battery power). Their interconnects are characterized by high loss rates, low data rates, and instability. LLNs are comprised of anything from a few dozen to thousands of routers. Support…
OSPFv3 includes a mechanism to support multiple instances of the protocol running on the same interface. OSPFv2 can utilize such a mechanism in order to support multiple routing domains on the same subnet. This document defines the OSPFv2 Instance ID to enable separate OSPFv2 protocol instances on the same interface. Unlike OSPFv3 where the Instance ID can be used for multiple purposes, such as pu…
This document describes the function and responsibilities of the RFC Independent Submission Editor (ISE). The Independent Submission stream is one of the stream producers that create draft RFCs, with the ISE as its stream approver. The ISE is overall responsible for activities within the Independent Submission stream, working with draft editors and reviewers, and interacts with the RFC Production …
This document moves "Use of /127 Prefix Length Between Routers Considered Harmful" (RFC 3627) to Historic status to reflect the updated guidance contained in "Using 127-Bit IPv6 Prefixes on Inter- Router Links" (RFC 6164). A Standards Track document supersedes an informational document; therefore, guidance provided in RFC 6164 is to be followed when the two documents are in conflict. This document…
Transport of Real-time Inter-network Defense (RID) Messages over HTTP/TLS
The Incident Object Description Exchange Format (IODEF) defines a common XML format for document exchange, and Real-time Inter-network Defense (RID) defines extensions to IODEF intended for the cooperative handling of security incidents within consortia of network operators and enterprises. This document specifies an application-layer protocol for RID based upon the passing of RID messages over HT…
Security incidents, such as system compromises, worms, viruses, phishing incidents, and denial of service, typically result in the loss of service, data, and resources both human and system. Service providers and Computer Security Incident Response Teams need to be equipped and ready to assist in communicating and tracing security incidents with tools and procedures in place before the occurrence …
TCP Candidates with Interactive Connectivity Establishment (ICE)
Interactive Connectivity Establishment (ICE) defines a mechanism for NAT traversal for multimedia communication protocols based on the offer/answer model of session negotiation. ICE works by providing a set of candidate transport addresses for each media stream, which are then validated with peer-to-peer connectivity checks based on Session Traversal Utilities for NAT (STUN). ICE provides a genera…
Reserved IPv6 Interface Identifier for Proxy Mobile IPv6
Proxy Mobile IPv6 (RFC 5213) requires that all mobile access gateways use a fixed link-local address and a fixed link-layer address on any of their access links that they share with mobile nodes. This requirement was intended to ensure that a mobile node does not detect any change with respect to its Layer 3 attachment, even after it roams from one mobile access gateway to another. In the absence …
Kerberos Version 5 Generic Security Service Application Program Interface (GSS-API) Channel Binding Hash Agility
Currently, channel bindings are implemented using an MD5 hash in the Kerberos Version 5 Generic Security Service Application Programming Interface (GSS-API) mechanism (RFC 4121). This document updates RFC 4121 to allow channel bindings using algorithms negotiated based on Kerberos crypto framework as defined in RFC 3961. In addition, because this update makes use of the last extensible field in th…
DomainKeys Identified Mail (DKIM) Authorized Third-Party Signatures
This experimental specification proposes a modification to DomainKeys Identified Mail (DKIM) allowing advertisement of third-party signature authorizations that are to be interpreted as equivalent to a signature added by the administrative domain of the message's author. This document defines an Experimental Protocol for the Internet community.
Given the global lack of available IPv4 space, and limitations in IPv4 extension and transition technologies, this document advises that IPv6 support is no longer considered optional. It also cautions that there are places in existing IETF documents where the term "IP" is used in a way that could be misunderstood by implementers as the term "IP" becomes a generic that can mean IPv4 + IPv6, IPv6-on…
Cryptographic protocols based on public-key methods have been traditionally based on certificates and Public Key Infrastructure (PKI) to support certificate management. The emerging field of Identity-Based Encryption (IBE) protocols allows simplification of infrastructure requirements via a Private-Key Generator (PKG) while providing the same flexibility. However, one significant limitation of IBE…
The Host Identity Protocol (HIP) Experiment Report
This document is a report from the IRTF Host Identity Protocol (HIP) research group documenting the collective experiences and lessons learned from studies, related experimentation, and designs completed by the research group. The document summarizes implications of adding HIP to host protocol stacks, Internet infrastructure, and applications. The perspective of a network operator, as well as a li…
This document specifies a common interface for using the Host Identity Protocol (HIP) with a Distributed Hash Table (DHT) service to provide a name-to-Host-Identity-Tag lookup service and a Host- Identity-Tag-to-address lookup service. This document defines an Experimental Protocol for the Internet community.
Network Configuration Protocol (NETCONF) Access Control Model
The standardization of network configuration interfaces for use with the Network Configuration Protocol (NETCONF) requires a structured and secure operating environment that promotes human usability and multi-vendor interoperability. There is a need for standard mechanisms to restrict NETCONF protocol access for particular users to a pre-configured subset of all available NETCONF protocol operatio…
Bump-in-the-Host (BIH) is a host-based IPv4 to IPv6 protocol translation mechanism that allows a class of IPv4-only applications that work through NATs to communicate with IPv6-only peers. The host on which applications are running may be connected to IPv6-only or dual-stack access networks. BIH hides IPv6 and makes the IPv4-only applications think they are talking with IPv4 peers by local synthes…
Loss Episode Metrics for IP Performance Metrics (IPPM)
The IETF has developed a one-way packet loss metric that measures the loss rate on a Poisson and Periodic probe streams between two hosts. However, the impact of packet loss on applications is, in general, sensitive not just to the average loss rate but also to the way in which packet losses are distributed in loss episodes (i.e., maximal sets of consecutively lost probe packets). This document de…
Internationalized Delivery Status and Disposition Notifications
Delivery status notifications (DSNs) are critical to the correct operation of an email system. However, the existing Draft Standards (RFC 3461, RFC 3464, RFC 6522) are presently limited to ASCII text in the machine-readable portions of the protocol. This specification adds a new address type for international email addresses so an original recipient address with non-ASCII characters can be correct…
Internet mail was originally limited to 7-bit ASCII. MIME added support for the use of 8-bit character sets in body parts, and also defined an encoded-word construct so other character sets could be used in certain header field values. However, full internationalization of electronic mail requires additional enhancements to allow the use of Unicode, including characters outside the ASCII repertoir…
This document specifies an SMTP extension for transport and delivery of email messages with internationalized email addresses or header information. [STANDARDS-TRACK]
Overview and Framework for Internationalized Email
Full use of electronic mail throughout the world requires that (subject to other constraints) people be able to use close variations on their own names (written correctly in their own languages and scripts) as mailbox names in email addresses. This document introduces a series of specifications that define mechanisms and protocol extensions needed to fully support internationalized email addresses…
This document reproduces the Host/Host Protocol developed by the ARPA Network Working Group during 1969, 1970, and 1971. It describes a protocol used to manage communication between processes residing on independent Hosts. It addresses issues of multiplexing multiple streams of communication (including addressing, flow control, connection establishment/disestablishment, and other signaling) over a…
This document specifies an algorithm for the generation of TCP Initial Sequence Numbers (ISNs), such that the chances of an off-path attacker guessing the sequence numbers in use by a target connection are reduced. This document revises (and formally obsoletes) RFC 1948, and takes the ISN generation algorithm originally proposed in that document to Standards Track, formally updating RFC 793. [STAN…
Definitions of Managed Objects for Virtual Router Redundancy Protocol Version 3 (VRRPv3)
This specification defines a portion of the Management Information Base (MIB) for use with network management based on the Simple Network Management Protocol (SNMP). In particular, it defines objects for configuring, monitoring, and controlling routers that employ the Virtual Router Redundancy Protocol Version 3 (VRRPv3) for both IPv4 and IPv6 as defined in RFC 5798. This memo obsoletes RFC 2787. …
IP Flow Information Export (IPFIX) Per Stream Control Transmission Protocol (SCTP) Stream
This document specifies an extension to the specifications in RFC 5101, IP Flow Information Export (IPFIX), when using the Partial Reliability extension of SCTP (PR-SCTP, Partial Reliability Stream Control Transmission Protocol). When implemented at both the Exporting Process and Collecting Process, this method offers several advantages, such as the ability to calculate Data Record losses for PR-S…
Stream Control Transmission Protocol (SCTP) Stream Reconfiguration
Many applications that use the Stream Control Transmission Protocol (SCTP) want the ability to "reset" a stream. The intention of resetting a stream is to set the numbering sequence of the stream back to 'zero' with a corresponding notification to the application layer that the reset has been performed. Applications requiring this feature want it so that they can "reuse" streams for different purp…
The Multipart/Report Media Type for the Reporting of Mail System Administrative Messages
The multipart/report Multipurpose Internet Mail Extensions (MIME) media type is a general "family" or "container" type for electronic mail reports of any kind. Although this memo defines only the use of the multipart/report media type with respect to delivery status reports, mail processing programs will benefit if a single media type is used for all kinds of reports. This memo obsoletes "The Mult…
Home Agent-Assisted Route Optimization between Mobile IPv4 Networks
This document describes a home agent-assisted route optimization functionality for the IPv4 Network Mobility Protocol. The function is designed to facilitate optimal routing in cases where all nodes are connected to a single home agent; thus, the use case is route optimization within a single organization or similar entity. The functionality enables the discovery of eligible peer nodes (based on i…