SCTP-Based Transport Mapping Layer (TML) for the Forwarding and Control Element Separation (ForCES) Protocol
This document defines the SCTP-based TML (Transport Mapping Layer) for the ForCES (Forwarding and Control Element Separation) protocol. It explains the rationale for choosing the SCTP (Stream Control Transmission Protocol) and also describes how this TML addresses all the requirements required by and the ForCES protocol. [STANDARDS TRACK]
Forwarding and Control Element Separation (ForCES) Protocol Specification
This document specifies the Forwarding and Control Element Separation (ForCES) protocol. The ForCES protocol is used for communications between Control Elements (CEs) and Forwarding Elements (FEs) in a ForCES Network Element (ForCES NE). This specification is intended to meet the ForCES protocol requirements defined in RFC 3654. Besides the ForCES protocol, this specification also defines the requ…
Requirements for a Location-by-Reference Mechanism
This document defines terminology and provides requirements relating to the Location-by-Reference approach using a location Uniform Resource Identifier (URI) to handle location information within signaling and other Internet messaging. This document is not an Internet Standards Track specification; it is published for informational purposes.
Definition of Master Key between PANA Client and Enforcement Point
This document defines a master key used between a client of the Protocol for carrying Authentication for Network Access (PANA) and an enforcement point, for bootstrapping lower-layer ciphering. The master key is derived from the Master Session Key of the Extensible Authentication Protocol as a result of successful PANA authentication. The master key guarantees cryptographic independence among enfo…
This RFC, which contains the text of an Internet Draft that was submitted originally to the SIP Working Group, is being published now for the historical record and to provide a reference for later Informational RFCs. The original Abstract follows. This document proposes an extension to the Session Initiation Protocol (SIP). This extension provides the ability for the called SIP user agent to ident…
Lightweight Directory Access Protocol (LDAP) update operations, such as Add, Delete, and Modify operations, have atomic, consistency, isolation, durability (ACID) properties. Each of these update operations act upon an entry. It is often desirable to update two or more entries in a single unit of interaction, a transaction. Transactions are necessary to support a number of applications including r…
Sieve scripts allow users to filter incoming email. Message stores are commonly sealed servers so users cannot log into them, yet users must be able to update their scripts on them. This document describes a protocol "ManageSieve" for securely managing Sieve scripts on a remote server. This protocol allows a user to have multiple scripts, and also alerts a user to syntactically flawed scripts. [ST…
This memo describes how the "authPassword" Lightweight Directory Access Protocol (LDAP) attribute can be used for storing secrets used by the Salted Challenge Response Authentication Message (SCRAM) mechanism in the Simple Authentication and Security Layer (SASL) framework. This document is not an Internet Standards Track specification; it is published for informational purposes.
Salted Challenge Response Authentication Mechanism (SCRAM) SASL and GSS-API Mechanisms
The secure authentication mechanism most widely deployed and used by Internet application protocols is the transmission of clear-text passwords over a channel protected by Transport Layer Security (TLS). There are some significant security concerns with that mechanism, which could be addressed by the use of a challenge response authentication mechanism protected by TLS. Unfortunately, the challeng…
Using Generic Security Service Application Program Interface (GSS-API) Mechanisms in Simple Authentication and Security Layer (SASL): The GS2 Mechanism Family
This document describes how to use a Generic Security Service Application Program Interface (GSS-API) mechanism in the Simple Authentication and Security Layer (SASL) framework. This is done by defining a new SASL mechanism family, called GS2. This mechanism family offers a number of improvements over the previous "SASL/ GSSAPI" mechanism: it is more general, uses fewer messages for the authentica…
Virtual Router Redundancy Protocol (VRRP) Version 3 for IPv4 and IPv6
This memo defines the Virtual Router Redundancy Protocol (VRRP) for IPv4 and IPv6. It is version three (3) of the protocol, and it is based on VRRP (version 2) for IPv4 that is defined in RFC 3768 and in "Virtual Router Redundancy Protocol for IPv6". VRRP specifies an election protocol that dynamically assigns responsibility for a virtual router to one of the VRRP routers on a LAN. The VRRP router…
Every version of the FTP specification has added a few new commands, with the early ones summarized in RFC 959. RFC 2389 established a mechanism for specifying and negotiating FTP extensions. The number of extensions, both those supported by the mechanism and some that are not, continues to increase. An IANA registry of FTP Command and Feature names is established to reduce the likelihood of confl…
Authentication and Confidentiality in Protocol Independent Multicast Sparse Mode (PIM-SM) Link-Local Messages
RFC 4601 mandates the use of IPsec to ensure authentication of the link-local messages in the Protocol Independent Multicast - Sparse Mode (PIM-SM) routing protocol. This document specifies mechanisms to authenticate the PIM-SM link-local messages using the IP security (IPsec) Encapsulating Security Payload (ESP) or (optionally) the Authentication Header (AH). It specifies optional mechanisms to p…
The Robust Header Compression (ROHC) protocol provides an efficient, flexible, and future-proof header compression concept. It is designed to operate efficiently and robustly over various link technologies with different characteristics. The ROHC framework, along with a set of compression profiles, was initially defined in RFC 3095. To improve and simplify the ROHC specifications, this document ex…
This document describes the ARIA encryption algorithm. ARIA is a 128-bit block cipher with 128-, 192-, and 256-bit keys. The algorithm consists of a key scheduling part and data randomizing part. This document is not an Internet Standards Track specification; it is published for informational purposes.
PB-TNC: A Posture Broker (PB) Protocol Compatible with Trusted Network Connect (TNC)
This document specifies PB-TNC, a Posture Broker protocol identical to the Trusted Computing Group's IF-TNCCS 2.0 protocol. The document then evaluates PB-TNC against the requirements defined in the NEA Requirements specification. [STANDARDS-TRACK]
PA-TNC: A Posture Attribute (PA) Protocol Compatible with Trusted Network Connect (TNC)
This document specifies PA-TNC, a Posture Attribute protocol identical to the Trusted Computing Group's IF-M 1.0 protocol. The document then evaluates PA-TNC against the requirements defined in the NEA Requirements specification. [STANDARDS-TRACK]
RFC 2731 ("Encoding Dublin Core Metadata in HTML") Is Obsolete
This document obsoletes RFC 2731, "Encoding Dublin Core Metadata in HTML", as further development of this specification has moved to the Dublin Core Metadata Initiative (DCMI). This document is not an Internet Standards Track specification; it is published for informational purposes.
Lightweight Internet Group Management Protocol Version 3 (IGMPv3) and Multicast Listener Discovery Version 2 (MLDv2) Protocols
This document describes lightweight IGMPv3 and MLDv2 protocols (LW- IGMPv3 and LW-MLDv2), which simplify the standard (full) versions of IGMPv3 and MLDv2. The interoperability with the full versions and the previous versions of IGMP and MLD is also taken into account. [STANDARDS-TRACK]
Several applications extending the Hypertext Transfer Protocol (HTTP) require a feature to do partial resource modification. The existing HTTP PUT method only allows a complete replacement of a document. This proposal adds a new HTTP method, PATCH, to modify an existing HTTP resource. [STANDARDS-TRACK]
The aim of this document is to establish a new IANA registry for IMAP keywords and to define a procedure for keyword registration, in order to improve interoperability between different IMAP clients. [STANDARDS TRACK]
The ITU-T has defined an architecture and requirements for operating an Automatically Switched Optical Network (ASON). The Generalized Multiprotocol Label Switching (GMPLS) protocol suite is designed to provide a control plane for a range of network technologies including optical networks such as time division multiplexing (TDM) networks including SONET/SDH and Optical Transport Networks (OTNs), a…
Advertising a Router's Local Addresses in OSPF Traffic Engineering (TE) Extensions
OSPF Traffic Engineering (TE) extensions are used to advertise TE Link State Advertisements (LSAs) containing information about TE-enabled links. The only addresses belonging to a router that are advertised in TE LSAs are the local addresses corresponding to TE-enabled links, and the local address corresponding to the Router ID. In order to allow other routers in a network to compute Multiprotocol…
Sieve Email Filtering: Sieves and Display Directives in XML
This document describes a way to represent Sieve email filtering language scripts in XML. Representing Sieves in XML is intended not as an alternate storage format for Sieve but rather as a means to facilitate manipulation of scripts using XML tools. The XML representation also defines additional elements that have no counterparts in the regular Sieve language. These elements are intended for use …
This document is an informational snapshot taken by the IRTF\'s Internet Congestion Control Research Group (ICCRG) in October 2008. It provides a survey of congestion control topics described by documents in the RFC series. This does not modify or update the specifications or status of the RFC documents that are discussed. It may be used as a reference or starting point for the future work of the …
The rise of spam and other anti-social behavior on the Internet has led to the creation of shared blacklists and whitelists of IP addresses or domains. The DNS has become the de-facto standard method of distributing these blacklists and whitelists. This memo documents the structure and usage of DNS-based blacklists and whitelists, and the protocol used to query them. This document is not an Intern…
This document specifies the rsync Uniform Resource Identifier (URI) scheme. This document is not an Internet Standards Track specification; it is published for informational purposes.
NAT Behavior Discovery Using Session Traversal Utilities for NAT (STUN)
This specification defines an experimental usage of the Session Traversal Utilities for NAT (STUN) Protocol that discovers the presence and current behavior of NATs and firewalls between the STUN client and the STUN server. This document defines an Experimental Protocol for the Internet community.
Diameter Proxy Mobile IPv6: Mobile Access Gateway and Local Mobility Anchor Interaction with Diameter Server
This specification defines Authentication, Authorization, and Accounting (AAA) interactions between Proxy Mobile IPv6 entities (both Mobile Access Gateway and Local Mobility Anchor) and a AAA server within a Proxy Mobile IPv6 Domain. These AAA interactions are primarily used to download and update mobile node specific policy profile information between Proxy Mobile IPv6 entities and a remote polic…