Опубликованные RFC, связи обновления и замены, официальные статусы и русские переводы.
Реестр · 9 842 документов
IANA Considerations for the IPv4 and IPv6 Router Alert Options
This document updates the IANA allocation rules and registry of IPv4 and IPv6 Router Alert Option Values. [STANDARDS-TRACK]
Elliptic Curve Cryptography (ECC) Support for Public Key Cryptography for Initial Authentication in Kerberos (PKINIT)
This document describes the use of Elliptic Curve certificates, Elliptic Curve signature schemes and Elliptic Curve Diffie-Hellman (ECDH) key agreement within the framework of PKINIT -- the Kerberos Version 5 extension that provides for the use of public key cryptography. This memo provides information for the Internet community.
TCP Friendly Rate Control (TFRC): Protocol Specification
This document specifies TCP Friendly Rate Control (TFRC). TFRC is a congestion control mechanism for unicast flows operating in a best-effort Internet environment. It is reasonably fair when competing for bandwidth with TCP flows, but has a much lower variation of throughput over time compared with TCP, making it more suitable for applications such as streaming media where a relatively smooth send…
Media Gateway Control Protocol Fax Package
This document defines a Media Gateway Control Protocol (MGCP) package to support fax calls. The package allows for fax calls to be supported in two different ways. The first one utilizes ITU-T Recommendation T.38 for fax relay under the control of the Call Agent. The second one lets the gateway decide upon a method for fax transmission as well as handle the details of the fax call without Call Age…
Operational Requirements for ENUM-Based Softswitch Use
This document describes experiences of operational requirements and several considerations for ENUM-based softswitches concerning call routing between two Korean Voice over IP (VoIP) carriers, gained during the ENUM pre-commercial trial hosted by the National Internet Development Agency of Korea (NIDA) in 2006. These experiences show that an interim solution can maintain the stability of ongoing c…
Simple Network Management Protocol (SNMP) Traffic Measurements and Trace Exchange Formats
The Simple Network Management Protocol (SNMP) is widely deployed to monitor, control, and (sometimes also) configure network elements. Even though the SNMP technology is well documented, it remains relatively unclear how SNMP is used in practice and what typical SNMP usage patterns are. This document describes an approach to carrying out large-scale SNMP traffic measurements in order to develop a …
Presence and Instant Messaging Peering Use Cases
This document describes several use cases of peering of non-VoIP (Voice over IP) services between two or more Service Providers. These Service Providers create a peering relationship between themselves, thus enabling their users to collaborate with users on the other Service Provider network. The target of this document is to drive requirements for peering between domains that provide the non-VoIP…
Simple Network Management Protocol (SNMP) Context EngineID Discovery
The Simple Network Management Protocol (SNMP) version three (SNMPv3) requires that an application know the identifier (snmpEngineID) of the remote SNMP protocol engine in order to retrieve or manipulate objects maintained on the remote SNMP entity. This document introduces a well-known localEngineID and a discovery mechanism that can be used to learn the snmpEngineID of a remote SNMP protocol engi…
IANA Considerations and IETF Protocol Usage for IEEE 802 Parameters
Some IETF protocols make use of Ethernet frame formats and IEEE 802 parameters. This document discusses some use of such parameters in IETF protocols and specifies IANA considerations for allocation of code points under the IANA OUI (Organizationally Unique Identifier). This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions fo…
The Internet Assigned Number Authority (IANA) tel Uniform Resource Identifier (URI) Parameter Registry
This document creates an Internet Assigned Number Authority (IANA) registry for tel Uniform Resource Identifier (URI) parameters and their values. It populates the registry with the parameters defined in the tel URI specification, along with the parameters in tel URI extensions defined for number portability and trunk groups. [STANDARDS-TRACK]
OSPF for IPv6
This document describes the modifications to OSPF to support version 6 of the Internet Protocol (IPv6). The fundamental mechanisms of OSPF (flooding, Designated Router (DR) election, area support, Short Path First (SPF) calculations, etc.) remain unchanged. However, some changes have been necessary, either due to changes in protocol semantics between IPv4 and IPv6, or simply to handle the increase…
Evaluation of Existing GMPLS Protocols against Multi-Layer and Multi-Region Networks (MLN/MRN)
This document provides an evaluation of Generalized Multiprotocol Label Switching (GMPLS) protocols and mechanisms against the requirements for Multi-Layer Networks (MLNs) and Multi-Region Networks (MRNs). In addition, this document identifies areas where additional protocol extensions or procedures are needed to satisfy these requirements, and provides guidelines for potential extensions. This me…
Using the Host Identity Protocol with Legacy Applications
This document is an informative overview of how legacy applications can be made to work with the Host Identity Protocol (HIP). HIP proposes to add a cryptographic name space for network stack names. From an application viewpoint, HIP-enabled systems support a new address family of host identifiers, but it may be a long time until such HIP-aware applications are widely deployed even if host systems…
Internationalized Delivery Status and Disposition Notifications
Delivery status notifications (DSNs) are critical to the correct operation of an email system. However, the existing Draft Standards (RFC 3461, RFC 3462, RFC 3464) are presently limited to US-ASCII text in the machine-readable portions of the protocol. This specification adds a new address type for international email addresses so an original recipient address with non-US-ASCII characters can be c…
SMTP Extension for Internationalized Email Addresses
This document specifies an SMTP extension for transport and delivery of email messages with internationalized email addresses or header information. Communication with systems that do not implement this specification is specified in another document. This document updates some syntaxes and rules defined in RFC 2821 and RFC 2822, and has some material updating RFC 4952This memo defines an Experimen…
Internationalized Email Headers
Full internationalization of electronic mail requires not only the capabilities to transmit non-ASCII content, to encode selected information in specific header fields, and to use non-ASCII characters in envelope addresses. It also requires being able to express those addresses and the information based on them in mail header fields. This document specifies an experimental variant of Internet mail…
Ogg Media Types
This document describes the registration of media types for the Ogg container format and conformance requirements for implementations of these types. This document obsoletes RFC 3534. [STANDARDS-TRACK]
IANA Registration of Enumservices for Internet Calendaring
This document registers Enumservices for Internet calendaring. Specifically, this document focuses on Enumservices for scheduling with iMIP (iCalendar Message-Based Interoperability Protocol) and for accessing Internet calendaring information with CalDAV (Calendaring Extensions to WebDAV). [STANDARDS-TRACK]
MPLS Multicast Encapsulations
RFC 3032 established two data link layer codepoints for MPLS, used to distinguish whether the data link layer frame is carrying an MPLS unicast or an MPLS multicast packet. However, this usage was never deployed. This specification updates RFC 3032 by redefining the meaning of these two codepoints. Both codepoints can now be used to carry multicast packets. The second codepoint (formerly the "mult…
MPLS Upstream Label Assignment and Context-Specific Label Space
RFC 3031 limits the MPLS architecture to downstream-assigned MPLS labels. This document introduces the notion of upstream-assigned MPLS labels. It describes the procedures for upstream MPLS label assignment and introduces the concept of a "Context-Specific Label Space". [STANDARDS-TRACK]
A Link-Type sub-TLV to Convey the Number of Traffic Engineering Label Switched Paths Signalled with Zero Reserved Bandwidth across a Link
Several Link-type sub-Type-Length-Values (sub-TLVs) have been defined for Open Shortest Path First (OSPF) and Intermediate System to Intermediate System (IS-IS) in the context of Multiprotocol Label Switching (MPLS) Traffic Engineering (TE), in order to advertise some link characteristics such as the available bandwidth, traffic engineering metric, administrative group, and so on. By making statis…
Traffic Engineering Extensions to OSPF Version 3
This document describes extensions to OSPFv3 to support intra-area Traffic Engineering (TE). This document extends OSPFv2 TE to handle IPv6 networks. A new TLV and several new sub-TLVs are defined to support IPv6 networks. [STANDARDS-TRACK]
A Uniform Resource Name (URN) Namespace for the Digital Video Broadcasting Project (DVB)
This document describes a Uniform Resource Name (URN) namespace for the Digital Video Broadcasting Project (DVB) for naming persistent resources defined within DVB standards. Example resources include technical documents and specifications, eXtensible Markup Language (XML) Schemas, classification schemes, XML Document Type Definitions (DTDs), namespaces, style sheets, media assets, and other types…
Licklider Transmission Protocol - Security Extensions
The Licklider Transmission Protocol (LTP) is intended to serve as a reliable convergence layer over single-hop deep-space radio frequency (RF) links. LTP does Automatic Repeat reQuest (ARQ) of data transmissions by soliciting selective-acknowledgment reception reports. It is stateful and has no negotiation or handshakes. This document describes security extensions to LTP, and is part of a series o…
Licklider Transmission Protocol - Specification
This document describes the Licklider Transmission Protocol (LTP), designed to provide retransmission-based reliability over links characterized by extremely long message round-trip times (RTTs) and/or frequent interruptions in connectivity. Since communication across interplanetary space is the most prominent example of this sort of environment, LTP is principally aimed at supporting "long-haul" …
Licklider Transmission Protocol - Motivation
This document describes the motivation for the development of the Licklider Transmission Protocol (LTP) designed to provide retransmission-based reliability over links characterized by extremely long message round-trip times (RTTs) and/or frequent interruptions in connectivity. Since communication across interplanetary space is the most prominent example of this sort of environment, LTP is princip…
MIB for Fibre-Channel Security Protocols (FC-SP)
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for information related to FC-SP, the Security Protocols defined for Fibre Channel. [STANDARDS-TRACK]
Web Distributed Authoring and Versioning (WebDAV) SEARCH
This document specifies a set of methods, headers, and properties composing Web Distributed Authoring and Versioning (WebDAV) SEARCH, an application of the HTTP/1.1 protocol to efficiently search for DAV resources based upon a set of client-supplied criteria. [STANDARDS-TRACK]
Internet Message Format
This document specifies the Internet Message Format (IMF), a syntax for text messages that are sent between computer users, within the framework of "electronic mail" messages. This specification is a revision of Request For Comments (RFC) 2822, which itself superseded Request For Comments (RFC) 822, "Standard for the Format of ARPA Internet Text Messages", updating it to reflect current practice a…
Simple Mail Transfer Protocol
Определяет передачу электронной почты между серверами: команды, ответы, маршрутизацию, повторные попытки и обработку ошибок. Документ относится к транспортировке сообщения; формат самого сообщения задаётся отдельно RFC 5322.