Опубликованные RFC, связи обновления и замены, официальные статусы и русские переводы.
Реестр · 9 842 документов
An Architecture for Open Pluggable Edge Services (OPES)
This memo defines an architecture that enables the creation of an application service in which a data provider, a data consumer, and zero or more application entities cooperatively implement a data stream service. This memo provides information for the Internet community.
Recommendations for Automatic Responses to Electronic Mail
This memo makes recommendations for software that automatically responds to incoming electronic mail messages, including "out of the office" or "vacation" response generators, mail filtering software, email-based information services, and other automatic responders. The purpose of these recommendations is to discourage undesirable behavior which is caused or aggravated by such software, to encoura…
Threat Analysis of the Domain Name System (DNS)
Although the DNS Security Extensions (DNSSEC) have been under development for most of the last decade, the IETF has never written down the specific set of threats against which DNSSEC is designed to protect. Among other drawbacks, this cart-before-the-horse situation has made it difficult to determine whether DNSSEC meets its design goals, since its design goals are not well specified. This note a…
Remote Service Discovery in the Service Location Protocol (SLP) via DNS SRV
Remote service discovery refers to discovering desired services in given remote (i.e., non-local) DNS domains. This document describes remote service discovery in the Service Location Protocol (SLP) via DNS SRV. It defines the DNS SRV Resource Records for SLP Directory Agent services, discusses various issues in using SLP and DNS SRV together for remote service discovery, and gives the steps for d…
Transmission of IPv6 Packets over Fibre Channel
This document specifies the way of encapsulating IPv6 packets over Fibre Channel, and the method of forming IPv6 link-local addresses and statelessly autoconfigured addresses on Fibre Channel networks. [STANDARDS-TRACK]
MIKEY: Multimedia Internet KEYing
This document describes a key management scheme that can be used for real-time applications (both for peer-to-peer communication and group communication). In particular, its use to support the Secure Real-time Transport Protocol is described in detail. Security protocols for real-time multimedia applications have started to appear. This has brought forward the need for a key management solution to…
Lightweight Directory Access Protocol (LDAP) Authorization Identity Request and Response Controls
This document extends the Lightweight Directory Access Protocol (LDAP) bind operation with a mechanism for requesting and returning the authorization identity it establishes. Specifically, this document defines the Authorization Identity Request and Response controls for use with the Bind operation. This memo provides information for the Internet community.
The Lightweight User Datagram Protocol (UDP-Lite)
This document describes the Lightweight User Datagram Protocol (UDP-Lite), which is similar to the User Datagram Protocol (UDP) (RFC 768), but can also serve applications in error-prone network environments that prefer to have partially damaged payloads delivered rather than discarded. If this feature is not used, UDP-Lite is semantically identical to UDP. [STANDARDS-TRACK]
Additional Snoop Datalink Types
The snoop file format provides a way to store and exchange datalink layer packet traces. This document describes extensions to this file format to support new media. This memo provides information for the Internet community.
The Advanced Encryption Standard (AES) Cipher Algorithm in the SNMP User-based Security Model
This document describes a symmetric encryption protocol that supplements the protocols described in the User-based Security Model (USM), which is a Security Subsystem for version 3 of the Simple Network Management Protocol for use in the SNMP Architecture. The symmetric encryption protocol described in this document is based on the Advanced Encryption Standard (AES) cipher algorithm used in Cipher…
Dynamic Host Configuration Protocol Option for Coordinate-based Location Configuration Information
This document specifies a Dynamic Host Configuration Protocol Option for the coordinate-based geographic location of the client. The Location Configuration Information (LCI) includes latitude, longitude, and altitude, with resolution indicators for each. The reference datum for these values is also included. [STANDARDS-TRACK]
Using E.164 numbers with the Session Initiation Protocol (SIP)
There are a number of contexts in which telephone numbers are employed by Session Initiation Protocol (SIP) applications, many of which can be addressed by ENUM. Although SIP was one of the primary applications for which ENUM was created, there is nevertheless a need to define procedures for integrating ENUM with SIP implementations. This document illustrates how the two protocols might work in co…
MIME Media Type for the Systems Biology Markup Language (SBML)
This document registers the MIME sub-type application/sbml+xml, a media type for SBML, the Systems Biology Markup Language. SBML is defined by The SBML Team at the California Institute of Technology and interested members of the systems biology community. This memo provides information for the Internet community.
Finding Fibre Channel over TCP/IP (FCIP) Entities Using Service Location Protocol version 2 (SLPv2)
This document defines the use of Service Location Protocol version 2 (SLPv2) by Fibre Channel over TCP/IP (FCIP) Entities. [STANDARDS-TRACK]
Fibre Channel Over TCP/IP (FCIP)
Fibre Channel Over TCP/IP (FCIP) describes mechanisms that allow the interconnection of islands of Fibre Channel storage area networks over IP-based networks to form a unified storage area network in a single Fibre Channel fabric. FCIP relies on IP-based network services to provide the connectivity between the storage area network islands over local area networks, metropolitan area networks, or wi…
Internet X.509 Public Key Infrastructure (PKI) Proxy Certificate Profile
This document forms a certificate profile for Proxy Certificates, based on X.509 Public Key Infrastructure (PKI) certificates as defined in RFC 3280, for use in the Internet. The term Proxy Certificate is used to describe a certificate that is derived from, and signed by, a normal X.509 Public Key End Entity Certificate or by another Proxy Certificate for the purpose of providing restricted proxyi…
Advice for Internet Subnetwork Designers
RFC 3819 предоставляет рекомендации проектировщикам цифрового коммуникационного оборудования, протоколов канального уровня и пакетных локальных сетей, поддерживающих IP. Документ рассматривает выбор MTU и фрагментацию, кадрирование, широковещательную и многоадресную передачу, надёжность, QoS, задержки, буферизацию, мобильность, маршрутизацию и безопасность. Он подчёркивает принцип «из конца в коне…
Читать русский перевод →IANA Considerations for the Point-to-Point Protocol (PPP)
RFC 3818 устанавливает для ряда пространств значений PPP политику выделения новых значений по «консенсусу IETF» вместо прежней политики «первый пришёл — первый обслужен». Обычно такой консенсус достигается через рабочую группу расширений PPP (pppext). Цель изменения — обеспечить рассмотрение предлагаемых расширений PPP, включая расширения, определённые в информационных RFC. Документ имеет статус B…
Читать русский перевод →Layer 2 Tunneling Protocol (L2TP) Active Discovery Relay for PPP over Ethernet (PPPoE)
The Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol datagrams over point-to-point links. Layer Two Tunneling Protocol (L2TP), facilitates the tunneling of PPP packets across an intervening packet-switched network. And yet a third protocol, PPP over Ethernet (PPPoE) describes how to build PPP sessions and to encapsulate PPP packets over Ethernet. L2TP Active…
Definitions of Managed Objects for RObust Header Compression (ROHC)
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes a set of managed objects that allow monitoring of running instances of RObust Header Compression (ROHC). The managed objects defined in this memo are grouped into three MIB modules. The ROHC-MIB module defines managed objects shared b…
Definitions of Managed Objects for the Multiprotocol Label Switching (MPLS), Label Distribution Protocol (LDP)
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for the Multiprotocol Label Switching, Label Distribution Protocol (LDP). [STANDARDS-TRACK]
Multiprotocol Label Switching (MPLS) Forwarding Equivalence Class To Next Hop Label Forwarding Entry (FEC-To-NHLFE) Management Information Base (MIB)
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for defining, configuring, and monitoring Forwarding Equivalence Class (FEC) to Next Hop Label Forwarding Entry (NHLFE) mappings and corresponding actions for use with Multiprotocol Label Switching (MPLS). [STANDARDS-T…
Multiprotocol Label Switching (MPLS) Label Switching Router (LSR) Management Information Base (MIB)
This memo defines an portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects to configure and/or monitor a Multiprotocol Label Switching (MPLS) Label Switching Router (LSR). [STANDARDS-TRACK]
Multiprotocol Label Switching (MPLS) Traffic Engineering (TE) Management Information Base (MIB)
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for Multiprotocol Label Switching (MPLS) based traffic engineering (TE). [STANDARDS-TRACK]
Definitions of Textual Conventions (TCs) for Multiprotocol Label Switching (MPLS) Management
This memo defines a Management Information Base (MIB) module which contains Textual Conventions to represent commonly used Multiprotocol Label Switching (MPLS) management information. The intent is that these TEXTUAL CONVENTIONS (TCs) will be imported and used in MPLS related MIB modules that would otherwise define their own representations. [STANDARDS-TRACK]
Multicast Listener Discovery Version 2 (MLDv2) for IPv6
This document updates RFC 2710, and it specifies Version 2 of the ulticast Listener Discovery Protocol (MLDv2). MLD is used by an IPv6 router to discover the presence of multicast listeners on directly attached links, and to discover which multicast addresses are of interest to those neighboring nodes. MLDv2 is designed to be interoperable with MLDv1. MLDv2 adds the ability for a node to report in…
Generic Requirements for Provider Provisioned Virtual Private Networks (PPVPN)
This document describes generic requirements for Provider Provisioned Virtual Private Networks (PPVPN). The requirements are categorized into service requirements, provider requirements and engineering requirements. These requirements are not specific to any particular type of PPVPN technology, but rather apply to all PPVPN technologies. All PPVPN technologies are expected to meet the umbrella set…
IANA Charset MIB
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. This IANA Charset MIB is now an IANA registry. In particular, a single textual convention 'IANACharset' is defined that may be used to specify charset labels in MIB objects. 'IANACharset' was extracted from Printer MIB v2 (RFC 3805). 'IANACharset' was originally…
V5.2-User Adaptation Layer (V5UA)
This document defines a mechanism for the backhauling of V5.2 messages over IP using the Stream Control Transmission Protocol (SCTP). This protocol may be used between a Signaling Gateway (SG) and a Media Gateway controller (MGC). It is assumed that the SG receives V5.2 signaling over a standard V5.2 interface. This document builds on the ISDN User Adaptation Layer Protocol (RFC 3057). It defines …
Printer Finishing MIB
This document defines a MIB module for the management of printer finishing device subunits. The finishing device subunits applicable to this MIB are an integral part of the Printer System. This MIB applies only to a Finisher Device that is connected to a Printer System. This memo provides information for the Internet community.