Session recording is a critical requirement in many communications environments, such as call centers and financial trading organizations. In some of these environments, all calls must be recorded for regulatory, compliance, and consumer-protection reasons. The recording of a session is typically performed by sending a copy of a media stream to a recording device. This document lists call flows wi…
Updating When Standards Track Documents May Refer Normatively to Documents at a Lower Level
RFC 3967 specifies a process for allowing normative references to documents at lower maturity levels ("downrefs"), which involves calling out the downref explicitly in the Last Call notice. That requirement has proven to be unnecessarily strict, and this document updates RFC 3967, allowing the IESG more flexibility in accepting downrefs in Standards Track documents.
IPv6 over Low-Power Wireless Personal Area Network (6LoWPAN) ESC Dispatch Code Points and Guidelines
RFC 4944 defines the ESC dispatch type to allow additional dispatch octets in the 6LoWPAN header. The value of the ESC dispatch type was updated by RFC 6282; however, its usage was not defined in either RFC 6282 or RFC 4944. This document updates RFC 4944 and RFC 6282 by defining the ESC extension octet code points and listing registration entries for known use cases at the time of writing of this…
Privacy Considerations for IPv6 Adaptation-Layer Mechanisms
This document discusses how a number of privacy threats apply to technologies designed for IPv6 over various link-layer protocols, and it provides advice to protocol designers on how to address such threats in adaptation-layer specifications for IPv6 over such links.
Recommendation on Stable IPv6 Interface Identifiers
This document changes the recommended default Interface Identifier (IID) generation scheme for cases where Stateless Address Autoconfiguration (SLAAC) is used to generate a stable IPv6 address. It recommends using the mechanism specified in RFC 7217 in such cases, and recommends against embedding stable link-layer addresses in IPv6 IIDs. It formally updates RFC 2464, RFC 2467, RFC 2470, RFC 2491, …
Key Relay Mapping for the Extensible Provisioning Protocol
This document describes an Extensible Provisioning Protocol (EPP) mapping for a key relay object that relays DNSSEC key material between EPP clients using the poll queue defined in RFC 5730. This key relay mapping will help facilitate changing the DNS operator of a domain while keeping the DNSSEC chain of trust intact.
This document defines extensions to the Kerberos protocol to allow a Kerberos client to securely communicate with a Kerberos application service without revealing its identity, or without revealing more than its Kerberos realm. It also defines extensions that allow a Kerberos client to obtain anonymous credentials without revealing its identity to the Kerberos Key Distribution Center (KDC). This d…
This document describes a mechanism for encrypting traffic encapsulated using the Locator/ID Separation Protocol (LISP). The design describes how key exchange is achieved using existing LISP control-plane mechanisms as well as how to secure the LISP data plane from third-party surveillance attacks.
This document defines a canonical address format encoding used in Locator/ID Separation Protocol (LISP) control messages and in the encoding of lookup keys for the LISP Mapping Database System.
PIM Join Attributes for Locator/ID Separation Protocol (LISP) Environments
This document defines two PIM Join/Prune attributes that support the construction of multicast distribution trees where the root and receivers are located in different Locator/ID Separation Protocol (LISP) sites. These attributes allow the receiver site to select between unicast and multicast underlying transport and to convey the RLOC (Routing Locator) address of the receiver ETR (Egress Tunnel R…
Signaling One-Click Functionality for List Email Headers
This document describes a method for signaling a one-click function for the List-Unsubscribe email header field. The need for this arises out of the actuality that mail software sometimes fetches URLs in mail header fields, and thereby accidentally triggers unsubscriptions in the case of the List-Unsubscribe header field.
Uniform Resource Name (URN) Namespaces for Broadband Forum
This document describes the Namespace Identifiers (NIDs) "bbf", "broadband-forum-org", and "dslforum-org" for Uniform Resource Names (URNs) used to identify resources published by Broadband Forum (BBF). BBF specifies and manages resources that utilize these three URN identification models. Management activities for these and other resource types are handled by BBF.
Extensible Provisioning Protocol (EPP) and Registration Data Access Protocol (RDAP) Status Mapping
This document describes the mapping of the Extensible Provisioning Protocol (EPP) statuses with the statuses registered for use in the Registration Data Access Protocol (RDAP). This document identifies gaps in the mapping, and registers RDAP statuses to fill those gaps to ensure that all of the EPP statuses specified in RFCs are supported in RDAP.
Session Initiation Protocol (SIP) Via Header Field Parameter to Indicate Received Realm
This specification defines a new Session Initiation Protocol (SIP) Via header field parameter, 'received-realm', which allows a SIP entity acting as an entry point to a transit network to indicate from which adjacent upstream network a SIP request is received by using a network realm value associated with the adjacent network.
Network News Transfer Protocol (NNTP) Extension for Compression
This document defines an extension to the Network News Transport Protocol (NNTP) that allows a connection to be effectively and efficiently compressed between an NNTP client and server.
HTTP Authentication Extensions for Interactive Clients
This document specifies extensions for the HTTP authentication framework for interactive clients. Currently, fundamental features of HTTP-level authentication are insufficient for complex requirements of various Web-based applications. This forces these applications to implement their own authentication frameworks by means such as HTML forms, which becomes one of the hurdles against introducing se…
Group Domain of Interpretation (GDOI) Protocol Support for IEC 62351 Security Services
The IEC 61850 power utility automation family of standards describes methods using Ethernet and IP for distributing control and data frames within and between substations. The IEC 61850-90-5 and IEC 62351-9 standards specify the use of the Group Domain of Interpretation (GDOI) protocol (RFC 6407) to distribute security transforms for some IEC 61850 security protocols. This memo defines GDOI payloa…
Applicability of a Stateful Path Computation Element (PCE)
A stateful Path Computation Element (PCE) maintains information about Label Switched Path (LSP) characteristics and resource usage within a network in order to provide traffic-engineering calculations for its associated Path Computation Clients (PCCs). This document describes general considerations for a stateful PCE deployment and examines its applicability and benefits, as well as its challenges…
Multi-Threaded Routing Toolkit (MRT) Routing Information Export Format with BGP Additional Path Extensions
This document extends the Multi-threaded Routing Toolkit (MRT) export format for Border Gateway Protocol (BGP) routing information by supporting the advertisement of multiple paths in BGP extensions.
This document defines a YANG data model that can be used for communication between customers and network operators and to deliver a Layer 3 provider-provisioned VPN service. This document is limited to BGP PE-based VPNs as described in RFCs 4026, 4110, and 4364. This model is intended to be instantiated at the management system to deliver the overall service. It is not a configuration model to be …
Interworking between the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP): Presence
This document defines a bidirectional protocol mapping for the exchange of presence information between the Session Initiation Protocol (SIP) and the Extensible Messaging and Presence Protocol (XMPP). This document obsoletes RFC 7248.
This document defines a mobility extension to the Host Identity Protocol (HIP). Specifically, this document defines a "LOCATOR_SET" parameter for HIP messages that allows for a HIP host to notify peers about alternate addresses at which it may be reached. This document also defines how the parameter can be used to preserve communications across a change to the IP address used by one or both peer h…
RADIUS Extensions for IP Port Configuration and Reporting
This document defines three new RADIUS attributes. For devices that implement IP port ranges, these attributes are used to communicate with a RADIUS server in order to configure and report IP transport ports as well as mapping behavior for specific hosts. This mechanism can be used in various deployment scenarios such as Carrier-Grade NAT, IPv4/IPv6 translators, Provider WLAN gateway, etc. This do…
RADIUS specifications have used data types for two decades without defining them as managed entities. During this time, RADIUS implementations have named the data types and have used them in attribute definitions. This document updates the specifications to better follow established practice. We do this by naming the data types defined in RFC 6158, which have been used since at least the publicati…
Source-Address-Dependent Routing and Source Address Selection for IPv6 Hosts: Overview of the Problem Space
This document presents the source-address-dependent routing (SADR) problem space from the host's perspective. Both multihomed hosts and hosts with multiple interfaces are considered. Several network architectures are presented to illustrate why source address selection and next-hop resolution are needed in view of source-address-dependent routing. The document is scoped on identifying a set of sce…
This document specifies an optional OSPF protocol extension to represent router metrics in a multi-access network in two parts: the metric from the router to the network and the metric from the network to the router. For such networks, the router-to-router metric for OSPF route computation is the sum of the two parts. This document updates RFC 2328.
Use Cases and Operational Experience with Multipath TCP
This document discusses both use cases and operational experience with Multipath TCP (MPTCP) in real networks. It lists several prominent use cases where Multipath TCP has been considered and is being used. It also gives insight to some heuristics and decisions that have helped to realize these use cases and suggests possible improvements.
This document describes an HTTP-based protocol that provides a programmatic interface for accessing data defined in YANG, using the datastore concepts defined in the Network Configuration Protocol (NETCONF).
Clock synchronization protocols are very widely used in IP-based networks. The Network Time Protocol (NTP) has been commonly deployed for many years, and the last few years have seen an increasingly rapid deployment of the Precision Time Protocol (PTP). As time-sensitive applications evolve, clock accuracy requirements are becoming increasingly stringent, requiring the time synchronization protoco…