IAB, IESG, and IAOC Selection, Confirmation, and Recall Process: Operation of the Nominating and Recall Committees
The process by which the members of the IAB and IESG, and some members of the IAOC, are selected, confirmed, and recalled is specified in this document. This document is a self-consistent, organized compilation of the process as it was known at the time of publication of RFC 3777, with various updates since that version was published.
A Virtual Private LAN Service (VPLS) is used to interconnect systems across a wide-area or metropolitan-area network, making it appear that they are on a private LAN. The systems that are interconnected may themselves be LAN switches. If, however, they are IP hosts or IP routers, certain simplifications to the operation of the VPLS are possible. We call this simplified type of VPLS an "IP-only LAN…
Opportunistic Security: Some Protection Most of the Time
This document defines the concept "Opportunistic Security" in the context of communications protocols. Protocol designs based on Opportunistic Security use encryption even when authentication is not available, and use authentication when possible, thereby removing barriers to the widespread use of encryption on the Internet.
Interworking ISDN Call Control User Information with SIP
The motivation and use cases for interworking and transporting User- to-User Information (UUI) from the ITU-T Digital Subscriber Signalling System No. 1 (DSS1) User-user information element within SIP are described in RFC 6567. As networks move to SIP, it is important that applications requiring this data can continue to function in SIP networks as well as have the ability to interwork with this I…
A Mechanism for Transporting User-to-User Call Control Information in SIP
There is a class of applications that benefit from using SIP to exchange User-to-User Information (UUI) data during session establishment. This information, known as call control UUI data, is a small piece of data inserted by an application initiating the session and utilized by an application accepting the session. The syntax and semantics for the UUI data used by a specific application are defin…
This document describes procedures for BGP MPLS-based Ethernet VPNs (EVPN). The procedures described here meet the requirements specified in RFC 7209 -- "Requirements for Ethernet VPN (EVPN)".
As IPTV deployments grow in number and size, service providers are looking for solutions that minimize the service disruption due to faults in the IP network carrying the packets for these services. This document describes a mechanism for minimizing packet loss in a network when node or link failures occur. Multicast-only Fast Reroute (MoFRR) works by making simple enhancements to multicast routin…
Distributed Mobility Management: Current Practices and Gap Analysis
This document analyzes deployment practices of existing IP mobility protocols in a distributed mobility management environment. It then identifies existing limitations when compared to the requirements defined for a distributed mobility management solution.
Transmission of IPv6 Packets over ITU-T G.9959 Networks
This document describes the frame format for transmission of IPv6 packets as well as a method of forming IPv6 link-local addresses and statelessly autoconfigured IPv6 addresses on ITU-T G.9959 networks.
Signature Authentication in the Internet Key Exchange Version 2 (IKEv2)
The Internet Key Exchange Version 2 (IKEv2) protocol has limited support for the Elliptic Curve Digital Signature Algorithm (ECDSA). The current version only includes support for three Elliptic Curve groups, and there is a fixed hash algorithm tied to each group. This document generalizes IKEv2 signature support to allow any signature method supported by PKIX and also adds signature hash algorithm…
Software-Defined Networking (SDN): Layers and Architecture Terminology
Software-Defined Networking (SDN) refers to a new approach for network programmability, that is, the capacity to initialize, control, change, and manage network behavior dynamically via open interfaces. SDN emphasizes the role of software in running networks through the introduction of an abstraction for the data forwarding plane and, by doing so, separates it from the control plane. This separati…
This memo describes how to use Adobe's Secure Real-Time Media Flow Protocol (RTMFP) to transport the video, audio, and data messages of Adobe Flash platform communications. Aspects of this application profile include cryptographic methods and data formats, flow metadata formats, and protocol details for client-server and peer-to-peer communication.
Mechanisms for Optimizing Link Aggregation Group (LAG) and Equal-Cost Multipath (ECMP) Component Link Utilization in Networks
Demands on networking infrastructure are growing exponentially due to bandwidth-hungry applications such as rich media applications and inter-data-center communications. In this context, it is important to optimally use the bandwidth in wired networks that extensively use link aggregation groups and equal-cost multipaths as techniques for bandwidth scaling. This document explores some of the mecha…
The Diameter base protocol provides facilities for protocol extensibility enabling the definition of new Diameter applications or modification of existing applications. This document is a companion document to the Diameter base protocol that further explains and clarifies the rules to extend Diameter. Furthermore, this document provides guidelines to Diameter application designers reusing/ definin…
Deterministic Address Mapping to Reduce Logging in Carrier-Grade NAT Deployments
In some instances, Service Providers (SPs) have a legal logging requirement to be able to map a subscriber's inside address with the address used on the public Internet (e.g., for abuse response). Unfortunately, many logging solutions for Carrier-Grade NATs (CGNs) require active logging of dynamic translations. CGN port assignments are often per connection, but they could optionally use port range…
Analysis of the 64-bit Boundary in IPv6 Addressing
The IPv6 unicast addressing format includes a separation between the prefix used to route packets to a subnet and the interface identifier used to specify a given interface connected to that subnet. Currently, the interface identifier is defined as 64 bits long for almost every case, leaving 64 bits for the subnet prefix. This document describes the advantages of this fixed boundary and analyzes t…
Path Computation Element Communication Protocol (PCEP) Management Information Base (MIB) Module
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects for modeling of the Path Computation Element Communication Protocol (PCEP) for communications between a Path Computation Client (PCC) and a Path Computation Element (PCE), or between two PCEs.
Common Interval Support in Bidirectional Forwarding Detection
Bidirectional Forwarding Detection (BFD) requires that messages be transmitted at regular intervals and provides a way to negotiate the interval used by BFD peers. Some BFD implementations may be restricted to only support several interval values. When such BFD implementations speak to each other, there is a possibility of two sides not being able to find a common value for the interval to run BFD…
This document provides a high-level description of things for Internet Engineering Task Force (IETF) participants to consider when bringing proposals for new research groups (RGs) into the Internet Research Task Force (IRTF). This document emphasizes differences in expectations between the two organizations.
Extensions to Generic Aggregate RSVP for IPv4 and IPv6 Reservations over Pre-Congestion Notification (PCN) Domains
This document specifies extensions to Generic Aggregate RSVP (RFC 4860) for support of the Pre-Congestion Notification (PCN) Controlled Load (CL) and Single Marking (SM) edge behaviors over a Diffserv cloud using PCN.
A Security Threat Analysis for the Routing Protocol for Low-Power and Lossy Networks (RPLs)
This document presents a security threat analysis for the Routing Protocol for Low-Power and Lossy Networks (RPLs). The development builds upon previous work on routing security and adapts the assessments to the issues and constraints specific to low-power and lossy networks. A systematic approach is used in defining and evaluating the security threats. Applicable countermeasures are application s…
The prevalent use of the Session Initiation Protocol (SIP) in Next Generation Networks necessitates that SIP networks provide adequate control mechanisms to maintain transaction throughput by preventing congestion collapse during traffic overloads. A loss-based solution to remedy known vulnerabilities of the SIP 503 (Service Unavailable) overload control mechanism has already been proposed. Using …
A Roadmap for Transmission Control Protocol (TCP) Specification Documents
This document contains a roadmap to the Request for Comments (RFC) documents relating to the Internet's Transmission Control Protocol (TCP). This roadmap provides a brief summary of the documents defining TCP and various TCP extensions that have accumulated in the RFC series. This serves as a guide and quick reference for both TCP implementers and other parties who desire information contained in …
This document describes an experimental TCP mechanism called TCP Fast Open (TFO). TFO allows data to be carried in the SYN and SYN-ACK packets and consumed by the receiving end during the initial connection handshake, and saves up to one full round-trip time (RTT) compared to the standard TCP, which requires a three-way handshake (3WHS) to complete before data can be exchanged. However, TFO deviat…
Requirements for MPLS Transport Profile (MPLS-TP) Shared Mesh Protection
This document presents the basic network objectives for the behavior of Shared Mesh Protection (SMP) that are not based on control-plane support. This document provides an expansion of the basic requirements presented in RFC 5654 ("Requirements of an MPLS Transport Profile") and RFC 6372 ("MPLS Transport Profile (MPLS-TP) Survivability Framework"). This document provides requirements for any mecha…
Multicast Listener Extensions for Mobile IPv6 (MIPv6) and Proxy Mobile IPv6 (PMIPv6) Fast Handovers
Fast handover protocols for Mobile IPv6 (MIPv6) and Proxy Mobile IPv6 (PMIPv6) define mobility management procedures that support unicast communication at reduced handover latency. Fast handover base operations do not affect multicast communication and, hence, do not accelerate handover management for native multicast listeners. Many multicast applications like IPTV or conferencing, though, compri…
A Property Types Registry for the Authentication-Results Header Field
This document updates RFC 7001 by creating a registry for property types in the Authentication-Results header field, used in email authentication work, rather than limiting participants to using the original, small set of fixed values.
Forwarding and Control Element Separation (ForCES) Packet Parallelization
Many network devices support parallel packet processing. This document describes how Forwarding and Control Element Separation (ForCES) can model a network device's parallelization datapath using constructs defined by the ForCES model (RFC 5812) and controlled via the ForCES protocol (RFC 5810).
Forwarding and Control Element Separation (ForCES) Model Extension
This memo extends the Forwarding and Control Element Separation (ForCES) model defined in RFC 5812 and updates that RFC to allow complex data types for metadata, optional default values for data types, and optional access types for structures. It also fixes an issue with Logical Functional Block (LFB) inheritance and introduces two new features: a new event condition called eventBecomesEqualTo and…