A YANG Data Model for SNMP Configuration
A YANG Data Model for SNMP Configuration
This document defines a collection of YANG definitions for configuring SNMP engines.
Опубликованные RFC, связи обновления и замены, официальные статусы и русские переводы.
Реестр · 9 842 документов
A YANG Data Model for SNMP Configuration
This document defines a collection of YANG definitions for configuring SNMP engines.
Extensions to the Emergency Services Architecture for Dealing With Unauthenticated and Unauthorized Devices
This document provides a problem statement, introduces terminology, and describes an extension for the base IETF emergency services architecture to address cases where an emergency caller is not authenticated, has no identifiable service provider, or has no remaining credit with which to pay for access to the network.
Case-Sensitive String Support in ABNF
This document extends the base definition of ABNF (Augmented Backus-Naur Form) to include a way to specify US-ASCII string literals that are matched in a case-sensitive manner.
Using Only Link-Local Addressing inside an IPv6 Network
In an IPv6 network, it is possible to use only link-local addresses on infrastructure links between routers. This document discusses the advantages and disadvantages of this approach to facilitate the decision process for a given network.
A Media-Based Traceroute Function for the Session Initiation Protocol (SIP)
SIP already provides the ability to perform hop-by-hop traceroute for SIP messages using the Max-Forwards header field to determine the reachability path of requests to a target. A mechanism for media-loopback calls has also been defined separately, which enables test calls to be generated that result in media being looped back to the originator. This document describes a means of performing hop-b…
Using the Encapsulating Security Payload (ESP) Transport Format with the Host Identity Protocol (HIP)
This memo specifies an Encapsulating Security Payload (ESP) based mechanism for transmission of user data packets, to be used with the Host Identity Protocol (HIP). This document obsoletes RFC 5202.
Host Identity Protocol Version 2 (HIPv2)
This document specifies the details of the Host Identity Protocol (HIP). HIP allows consenting hosts to securely establish and maintain shared IP-layer state, allowing separation of the identifier and locator roles of IP addresses, thereby enabling continuity of communications across IP address changes. HIP is based on a Diffie-Hellman key exchange, using public key identifiers from a new Host Ide…
6LoWPAN-GHC: Generic Header Compression for IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs)
RFC 6282 defines header compression in 6LoWPAN packets (where "6LoWPAN" refers to "IPv6 over Low-Power Wireless Personal Area Network"). The present document specifies a simple addition that enables the compression of generic headers and header-like payloads, without a need to define a new header compression scheme for each such new header or header-like payload.
Unanswered Questions in the Path Computation Element Architecture
The Path Computation Element (PCE) architecture is set out in RFC 4655. The architecture is extended for multi-layer networking with the introduction of the Virtual Network Topology Manager (VNTM) in RFC 5623 and generalized to Hierarchical PCE (H-PCE) in RFC 6805. These three architectural views of PCE deliberately leave some key questions unanswered, especially with respect to the interactions b…
A Reference Path and Measurement Points for Large-Scale Measurement of Broadband Performance
This document defines a reference path for Large-scale Measurement of Broadband Access Performance (LMAP) and measurement points for commonly used performance metrics. Other similar measurement projects may also be able to use the extensions described here for measurement point location. The purpose is to create an efficient way to describe the location of the measurement point(s) used to conduct …
Report from the Smart Object Security Workshop
This document provides a summary of a workshop on 'Smart Object Security' that took place in Paris on March 23, 2012. The main goal of the workshop was to allow participants to share their thoughts about the ability to utilize existing and widely deployed security mechanisms for smart objects. This report summarizes the discussions and lists the conclusions and recommendations to the Internet Engi…
JSON Merge Patch
This specification defines the JSON merge patch format and processing rules. The merge patch format is primarily intended for use with the HTTP PATCH method as a means of describing a set of modifications to a target resource's content.
An Extensible Messaging and Presence Protocol (XMPP) Subprotocol for WebSocket
This document defines a binding for the Extensible Messaging and Presence Protocol (XMPP) over a WebSocket transport layer. A WebSocket binding for XMPP provides higher performance than the current HTTP binding for XMPP.
Definition of Time to Live TLV for LSP-Ping Mechanisms
LSP-Ping is a widely deployed Operation, Administration, and Maintenance (OAM) mechanism in MPLS networks. However, in the present form, this mechanism is inadequate to verify connectivity of a segment of a Multi-Segment Pseudowire (MS-PW) and/or bidirectional co-routed Label Switched Path (LSP) from any node on the path of the MS-PW and/or bidirectional co-routed LSP. This document defines a TLV …
Using the Port Control Protocol (PCP) to Update Dynamic DNS
This document focuses on the problems encountered when using dynamic DNS in address-sharing contexts (e.g., Dual-Stack Lite (DS-Lite) and Network Address and Protocol Translation from IPv6 Clients to IPv4 Servers (NAT64)) during IPv6 transition. Both issues and possible solutions are documented in this memo.
Explicit Path Routing for Dynamic Multi-Segment Pseudowires
When set up through an explicit path, dynamic Multi-Segment Pseudowires (MS-PWs) may be required to provide a simple solution for 1:1 protection with diverse primary and backup MS-PWs for a service, or to enable controlled signaling (strict or loose) for special MS-PWs. This document specifies the extensions and procedures required to enable dynamic MS-PWs to be established along explicit paths.
Forwarding and Control Element Separation (ForCES) Protocol Extensions
Experience in implementing and deploying the Forwarding and Control Element Separation (ForCES) architecture has demonstrated the need for a few small extensions both to ease programmability and to improve wire efficiency of some transactions. The ForCES protocol is extended with a table range operation and a new extension for error handling. This document updates the semantics in RFCs 5810 and 71…
Group Communication for the Constrained Application Protocol (CoAP)
The Constrained Application Protocol (CoAP) is a specialized web transfer protocol for constrained devices and constrained networks. It is anticipated that constrained devices will often naturally operate in groups (e.g., in a building automation scenario, all lights in a given room may need to be switched on/off as a group). This specification defines how CoAP should be used in a group communicat…
Separation of Control and User Plane for Proxy Mobile IPv6
This document specifies a method to split the control plane (CP) and user plane (UP) for a network infrastructure based on Proxy Mobile IPv6 (PMIPv6). Existing specifications allow a mobile access gateway (MAG) to separate its control and user plane using the Alternate Care-of Address mobility option for IPv6 or Alternate IPv4 Care-of Address option for IPv4. However, the current specification doe…
Definition of Managed Objects for IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs)
This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it defines objects for managing IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs).
A Framework for Ethernet Tree (E-Tree) Service over a Multiprotocol Label Switching (MPLS) Network
This document describes an Ethernet-Tree (E-Tree) solution framework for supporting the Metro Ethernet Forum (MEF) E-Tree service over a Multiprotocol Label Switching (MPLS) network. The objective is to provide a simple and effective approach to emulate E-Tree services in addition to Ethernet LAN (E-LAN) services on an existing MPLS network.
JSON Merge Patch
This specification defines the JSON merge patch format and processing rules. The merge patch format is primarily intended for use with the HTTP PATCH method as a means of describing a set of modifications to a target resource's content.
IANA Registry for P-Multicast Service Interface (PMSI) Tunnel Type Code Points
RFC 6514 created a space of Tunnel Type code points for a new BGP attribute called the "P-Multicast Service Interface Tunnel (PMSI Tunnel) attribute". However, the RFC did not create a corresponding IANA registry. There now is need to make further code point allocations from this name space. This document serves to update RFC 6514 in that it creates an IANA registry for that purpose.
Security Requirements of Time Protocols in Packet Switched Networks
As time and frequency distribution protocols are becoming increasingly common and widely deployed, concern about their exposure to various security threats is increasing. This document defines a set of security requirements for time protocols, focusing on the Precision Time Protocol (PTP) and the Network Time Protocol (NTP). This document also discusses the security impacts of time protocol practi…
Internet Key Exchange Protocol Version 2 (IKEv2) Message Fragmentation
This document describes a way to avoid IP fragmentation of large Internet Key Exchange Protocol version 2 (IKEv2) messages. This allows IKEv2 messages to traverse network devices that do not allow IP fragments to pass through.
Template for a Certification Practice Statement (CPS) for the Resource PKI (RPKI)
This document contains a template to be used for creating a Certification Practice Statement (CPS) for an organization that is part of the Resource Public Key Infrastructure (RPKI), e.g., a resource allocation registry or an ISP.
Enterprise IPv6 Deployment Guidelines
Enterprise network administrators worldwide are in various stages of preparing for or deploying IPv6 into their networks. The administrators face different challenges than operators of Internet access providers and have reasons for different priorities. The overall problem for many administrators will be to offer Internet- facing services over IPv6 while continuing to support IPv4, and while intro…
RTP Control Protocol (RTCP) Extended Report (XR) Block for MPEG2 Transport Stream (TS) Program Specific Information (PSI) Decodability Statistics Metrics Reporting
An MPEG2 Transport Stream (TS) is a standard container format used in the transmission and storage of multimedia data. Unicast/multicast MPEG2 TS over RTP is widely deployed in IPTV systems. This document defines an RTP Control Protocol (RTCP) Extended Report (XR) block that allows the reporting of MPEG2 TS decodability statistics metrics related to transmissions of MPEG2 TS over RTP. The metrics …
Problem Statement and Goals for Active-Active Connection at the Transparent Interconnection of Lots of Links (TRILL) Edge
The IETF TRILL (Transparent Interconnection of Lots of Links) protocol provides support for flow-level multipathing with rapid failover for both unicast and multi-destination traffic in networks with arbitrary topology. Active-active connection at the TRILL edge is the extension of these characteristics to end stations that are multiply connected to a TRILL campus. This informational document disc…
Trustworthy Location
The trustworthiness of location information is critically important for some location-based applications, such as emergency calling or roadside assistance. This document describes threats to conveying location, particularly for emergency calls, and describes techniques that improve the reliability and security of location information. It also provides guidelines for assessing the trustworthiness o…