Improving Awareness of Running Code: The Implementation Status Section
This document describes a simple process that allows authors of Internet-Drafts to record the status of known implementations by including an Implementation Status section. This will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, which may serve as evidence of valuable experimentation and feedback that have made the implemented pr…
A Framework for IP and MPLS Fast Reroute Using Not-Via Addresses
This document presents an illustrative framework for providing fast reroute in an IP or MPLS network through encapsulation and forwarding to "not-via" addresses. The general approach described here uses a single level of encapsulation and could be used to protect unicast, multicast, and LDP traffic against link, router, and shared risk group failure, regardless of network topology and metrics. The…
Security Implications of IPv6 Fragmentation with IPv6 Neighbor Discovery
This document analyzes the security implications of employing IPv6 fragmentation with Neighbor Discovery (ND) messages. It updates RFC 4861 such that use of the IPv6 Fragmentation Header is forbidden in all Neighbor Discovery messages, thus allowing for simple and effective countermeasures for Neighbor Discovery attacks. Finally, it discusses the security implications of using IPv6 fragmentation w…
Deterministic Usage of the Digital Signature Algorithm (DSA) and Elliptic Curve Digital Signature Algorithm (ECDSA)
This document defines a deterministic digital signature generation procedure. Such signatures are compatible with standard Digital Signature Algorithm (DSA) and Elliptic Curve Digital Signature Algorithm (ECDSA) digital signatures and can be processed with unmodified verifiers, which need not be aware of the procedure described therein. Deterministic signatures retain the cryptographic security fe…
A TCP Authentication Option Extension for NAT Traversal
This document describes an extension to the TCP Authentication Option (TCP-AO) to support its use over connections that pass through Network Address Translators and/or Network Address and Port Translators (NATs/NAPTs). This extension changes the data used to compute traffic keys, but it does not alter TCP-AO's packet processing or key generation algorithms.
Triggering DHCPv6 Reconfiguration from Relay Agents
This document defines two new DHCPv6 messages: Reconfigure-Request and Reconfigure-Reply. The Reconfigure-Request message is sent by a DHCPv6 relay agent to notify a DHCPv6 server about a configuration information change, so that the DHCPv6 server can send a Reconfigure message accordingly. The Reconfigure-Reply message is used by the server to acknowledge the receipt of the Reconfigure-Request me…
Framework for Loop-Free Convergence Using the Ordered Forwarding Information Base (oFIB) Approach
This document describes an illustrative framework of a mechanism for use in conjunction with link-state routing protocols that prevents the transient loops that would otherwise occur during topology changes. It does this by correctly sequencing the forwarding information base (FIB) updates on the routers. This mechanism can be used in the case of non-urgent (management action) link or node shutdow…
Signaling Cryptographic Algorithm Understanding in DNS Security Extensions (DNSSEC)
The DNS Security Extensions (DNSSEC) were developed to provide origin authentication and integrity protection for DNS data by using digital signatures. These digital signatures can be generated using different algorithms. This document specifies a way for validating end-system resolvers to signal to a server which digital signature and hash algorithms they support. The extensions allow the signali…
Applicability of MPLS Transport Profile for Ring Topologies
This document presents an applicability of existing MPLS protection mechanisms, both local and end-to-end, to the MPLS Transport Profile (MPLS-TP) in ring topologies. This document does not propose any new mechanisms or protocols. Requirements for MPLS-TP protection especially for protection in ring topologies are discussed in "Requirements of an MPLS Transport Profile" (RFC 5654) and "MPLS Transp…
This document offers guidance for developing privacy considerations for inclusion in protocol specifications. It aims to make designers, implementers, and users of Internet protocols aware of privacy-related design choices. It suggests that whether any individual RFC warrants a specific privacy considerations section will depend on the document's content.
Problem Statement and Requirements of the Peer-to-Peer Streaming Protocol (PPSP)
Peer-to-Peer (P2P) streaming systems becoming more and more popular on the Internet, and most of them are using proprietary protocols. This document identifies problems associated with proprietary protocols; proposes the development of the Peer-to-Peer Streaming Protocol (PPSP), which includes the tracker and peer protocols; and discusses the scope, requirements, and use cases of PPSP.
Depth-First Forwarding (DFF) in Unreliable Networks
This document specifies the Depth-First Forwarding (DFF) protocol for IPv6 networks, a data-forwarding mechanism that can increase reliability of data delivery in networks with dynamic topology and/or lossy links. The protocol operates entirely on the forwarding plane but may interact with the routing plane. DFF forwards data packets using a mechanism similar to a "depth-first search" for the dest…
Universal Plug and Play (UPnP) Internet Gateway Device - Port Control Protocol Interworking Function (IGD-PCP IWF)
This document specifies the behavior of the Universal Plug and Play (UPnP) Internet Gateway Device - Port Control Protocol Interworking Function (IGD-PCP IWF). A UPnP IGD-PCP IWF is required to be embedded in Customer Premises (CP) routers to allow for transparent NAT control in environments where a UPnP IGD is used on the LAN side and PCP is used on the external side of the CP router.
This document modifies the "Unassigned" number space in the IANA "OSPFv3 Instance ID Address Family Values" registry by dividing it in two halves -- one half Unassigned but managed via Standards Action, and the other Reserved for Private Use. It updates RFC 5838.
FCAST: Object Delivery for the Asynchronous Layered Coding (ALC) and NACK-Oriented Reliable Multicast (NORM) Protocols
This document introduces the FCAST reliable object (e.g., file) delivery application. It is designed to operate either on top of the underlying Asynchronous Layered Coding (ALC) / Layered Coding Transport (LCT) reliable multicast transport protocol or the NACK-Oriented Reliable Multicast (NORM) transport protocol.
Analysis of Potential Solutions for Revealing a Host Identifier (HOST_ID) in Shared Address Deployments
This document is a collection of potential solutions for revealing a host identifier (denoted as HOST_ID) when a Carrier Grade NAT (CGN) or application proxies are involved in the path. This host identifier could be used by a remote server to sort packets according to the sending host. The host identifier must be unique to each host under the same shared IP address. This document analyzes a set of…
MPLS Transport Profile (MPLS-TP) Applicability: Use Cases and Design
This document describes the applicability of the MPLS Transport Profile (MPLS-TP) with use case studies and network design considerations. The use cases include Metro Ethernet access and aggregation transport, mobile backhaul, and packet optical transport.
Operational Guidance for IPv6 Deployment in IPv4 Sites Using the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP)
Many end-user sites in the Internet today still have predominantly IPv4 internal infrastructures. These sites range in size from small home/office networks to large corporate enterprise networks, but share the commonality that IPv4 provides satisfactory internal routing and addressing services for most applications. As more and more IPv6-only services are deployed, however, end-user devices within…
A Uniform Resource Name (URN) Namespace for Examples
This document defines a Uniform Resource Name (URN) namespace identifier enabling the generation of URNs that are appropriate for use in documentation and in URN-related testing and experimentation.
This document describes an experimental protocol for publicly logging the existence of Transport Layer Security (TLS) certificates as they are issued or observed, in a manner that allows anyone to audit certificate authority (CA) activity and notice the issuance of suspect certificates as well as to audit the certificate logs themselves. The intent is that eventually clients would refuse to honor …
The Transport Layer Security (TLS) Multiple Certificate Status Request Extension
This document defines the Transport Layer Security (TLS) Certificate Status Version 2 Extension to allow clients to specify and support several certificate status methods. (The use of the Certificate Status extension is commonly referred to as "OCSP stapling".) Also defined is a new method based on the Online Certificate Status Protocol (OCSP) that servers can use to provide status information abo…
X.509 Internet Public Key Infrastructure Online Certificate Status Protocol - OCSP
This document specifies a protocol useful in determining the current status of a digital certificate without requiring Certificate Revocation Lists (CRLs). Additional mechanisms addressing PKIX operational requirements are specified in separate documents. This document obsoletes RFCs 2560 and 6277. It also updates RFC 5912.
The Source Address Validation Improvement (SAVI) effort aims to complement ingress filtering with finer-grained, standardized IP source address validation. This document describes threats enabled by IP source address spoofing both in the global and finer-grained context, describes currently available solutions and challenges, and provides a starting point analysis for finer-grained (host granulari…
RTP Control Protocol (RTCP) Extended Report (XR) Block for Burst/Gap Loss Metric Reporting
This document defines an RTP Control Protocol (RTCP) Extended Report (XR) Block that allows the reporting of burst and gap loss metrics for use in a range of RTP applications.
The document describes a proxy-based mechanism allowing the use of Duplicate Address Detection (DAD) by IPv6 nodes in a point-to-multipoint architecture with a "split-horizon" forwarding scheme, primarily deployed for Digital Subscriber Line (DSL) and Fiber access architectures. Based on the DAD signaling, the first-hop router stores in a Binding Table all known IPv6 addresses used on a point-to-m…
Forwarding and Control Element Separation (ForCES) Logical Function Block (LFB) Library
This document defines basic classes of Logical Function Blocks (LFBs) used in Forwarding and Control Element Separation (ForCES). The basic LFB classes are defined according to the ForCES Forwarding Element (FE) model and ForCES protocol specifications; they are scoped to meet requirements of typical router functions and are considered the basic LFB library for ForCES. The library includes the des…
This document describes two methods for producing an integrity check value from a Diffie-Hellman key pair and one method for producing an integrity check value from an Elliptic Curve key pair. This behavior is needed for such operations as creating the signature of a Public-Key Cryptography Standards (PKCS) #10 Certification Request. These algorithms are designed to provide a Proof-of-Possession o…
Using the Elliptic Curve Cryptography (ECC) Brainpool Curves for the Internet Key Exchange Protocol Version 2 (IKEv2)
This document specifies use of the Elliptic Curve Cryptography (ECC) Brainpool elliptic curve groups for key exchange in the Internet Key Exchange Protocol version 2 (IKEv2).
Protocol to Access White-Space (PAWS) Databases: Use Cases and Requirements
Portions of the radio spectrum that are assigned to a particular use but are unused or unoccupied at specific locations and times are defined as "white space". The concept of allowing additional transmissions (which may or may not be licensed) in white space is a technique to "unlock" existing spectrum for new use. This document includes the problem statement for the development of a protocol to a…
Analysis of BGP, LDP, PCEP, and MSDP Issues According to the Keying and Authentication for Routing Protocols (KARP) Design Guide
This document analyzes TCP-based routing protocols, the Border Gateway Protocol (BGP), the Label Distribution Protocol (LDP), the Path Computation Element Communication Protocol (PCEP), and the Multicast Source Distribution Protocol (MSDP), according to guidelines set forth in Section 4.2 of "Keying and Authentication for Routing Protocols Design Guidelines", RFC 6518.