UDP Encapsulation of Stream Control Transmission Protocol (SCTP) Packets for End-Host to End-Host Communication
This document describes a simple method of encapsulating Stream Control Transmission Protocol (SCTP) packets into UDP packets and its limitations. This allows the usage of SCTP in networks with legacy NATs that do not support SCTP. It can also be used to implement SCTP on hosts without directly accessing the IP layer, for example, implementing it as part of the application without requiring specia…
Architectural Considerations on Application Features in the DNS
A number of Internet applications rely on the Domain Name System (DNS) to support their operations. Many applications use the DNS to locate services for a domain; some, for example, transform identifiers other than domain names into formats that the DNS can process, and then fetch application data or service location data from the DNS. Proposals incorporating sophisticated application behavior usi…
RFC Series Format Requirements and Future Development
This document describes the current requirements and requests for enhancements for the format of the canonical version of RFCs. Terms are defined to help clarify exactly which stages of document production are under discussion for format changes. The requirements described in this document will determine what changes will be made to RFC format. This document updates RFC 2223.
Some Measurements on World IPv6 Day from an End-User Perspective
During World IPv6 Day on June 8, 2011, several key content providers enabled their networks to offer both IPv4 and IPv6 services. Hundreds of organizations participated in this effort, and in the months and weeks leading up to the event worked hard on preparing their networks to support this event. The event was largely unnoticed by the general public, which is a good thing since it means that no …
The Session Description Protocol (SDP) Alternate Connectivity (ALTC) Attribute
This document proposes a mechanism that allows the same SDP offer to carry multiple IP addresses of different address families (e.g., IPv4 and IPv6). The proposed attribute, the "altc" attribute, solves the backward-compatibility problem that plagued Alternative Network Address Types (ANAT) due to their syntax. The proposed solution is applicable to scenarios where connectivity checks are not requ…
The IPv6 specification allows packets to contain a Fragment Header without the packet being actually fragmented into multiple pieces (we refer to these packets as "atomic fragments"). Such packets are typically sent by hosts that have received an ICMPv6 "Packet Too Big" error message that advertises a Next-Hop MTU smaller than 1280 bytes, and are currently processed by some implementations as norm…
Definitions of Managed Objects for the Resource Public Key Infrastructure (RPKI) to Router Protocol
This document defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes objects used for monitoring the Resource Public Key Infrastructure (RPKI) to Router Protocol.
Applicability Statement: DNS Security (DNSSEC) DNSKEY Algorithm Implementation Status
The DNS Security Extensions (DNSSEC) requires the use of cryptographic algorithm suites for generating digital signatures over DNS data. There is currently an IANA registry for these algorithms, but there is no record of the recommended implementation status of each algorithm. This document provides an applicability statement on algorithm implementation status for DNSSEC component software. This d…
Issues in Identifier Comparison for Security Purposes
Identifiers such as hostnames, URIs, IP addresses, and email addresses are often used in security contexts to identify security principals and resources. In such contexts, an identifier presented via some protocol is often compared using some policy to make security decisions such as whether the security principal may access the resource, what level of authentication or encryption is required, etc…
Diameter Support for the EAP Re-authentication Protocol (ERP)
The EAP Re-authentication Protocol (ERP) defines extensions to the Extensible Authentication Protocol (EAP) to support efficient re-authentication between the peer and an EAP Re-authentication (ER) server through a compatible authenticator. This document specifies Diameter support for ERP. It defines a new Diameter ERP application to transport ERP messages between an ER authenticator and the ER se…
MPLS Transport Profile (MPLS-TP) Security Framework
This document provides a security framework for the MPLS Transport Profile (MPLS-TP). MPLS-TP extends MPLS technologies and introduces new Operations, Administration, and Maintenance (OAM) capabilities, a transport-oriented path protection mechanism, and strong emphasis on static provisioning supported by network management systems. This document addresses the security aspects relevant in the cont…
REsource LOcation And Discovery (RELOAD) Base Protocol
This specification defines REsource LOcation And Discovery (RELOAD), a peer-to-peer (P2P) signaling protocol for use on the Internet. A P2P signaling protocol provides its clients with an abstract storage and messaging service between a set of cooperating peers that form the overlay network. RELOAD is designed to support a P2P Session Initiation Protocol (P2PSIP) network, but can be utilized by ot…
This document specifies the format and mechanism that is to be used for encoding the client link-layer address in DHCPv6 Relay-Forward messages by defining a new DHCPv6 Client Link-Layer Address option.
Deprecation of BGP Path Attributes: DPA, ADVERTISER, and RCID_PATH / CLUSTER_ID
This document requests IANA to deprecate the following BGP path attributes: DPA, ADVERTISER, and RCID_PATH / CLUSTER_ID, associated with an abandoned Internet-Draft and a Historic RFC.
This document describes an experimental Proportional Rate Reduction (PRR) algorithm as an alternative to the widely deployed Fast Recovery and Rate-Halving algorithms. These algorithms determine the amount of data sent by TCP during loss recovery. PRR minimizes excess window adjustments, and the actual window size at the end of recovery will be as close as possible to the ssthresh, as determined b…
Applicability Statement for the Use of IPv6 UDP Datagrams with Zero Checksums
This document provides an applicability statement for the use of UDP transport checksums with IPv6. It defines recommendations and requirements for the use of IPv6 UDP datagrams with a zero UDP checksum. It describes the issues and design principles that need to be considered when UDP is used with IPv6 to support tunnel encapsulations, and it examines the role of the IPv6 UDP transport checksum. T…
This document updates the IPv6 specification (RFC 2460) to improve performance when a tunnel protocol uses UDP with IPv6 to tunnel packets. The performance improvement is obtained by relaxing the IPv6 UDP checksum requirement for tunnel protocols whose header information is protected on the "inner" packet being carried. Relaxing this requirement removes the overhead associated with the computation…
Applicability of the Access Node Control Mechanism to Broadband Networks Based on Passive Optical Networks (PONs)
The purpose of this document is to provide applicability of the Access Node Control Mechanism to broadband access based on Passive Optical Networks (PONs). The need for an Access Node Control Mechanism between a Network Access Server (NAS) and an Access Node Complex, composed of a combination of Optical Line Termination (OLT) and Optical Network Termination (ONT) elements, is described in a multi-…
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. In particular, it describes managed objects used for managing multiple logical and physical entities managed by a single Simple Network Management Protocol (SNMP) agent. This document specifies version 4 of the Entity MIB. This memo obsoletes version 3 of the En…
Brainpool Elliptic Curves for the Internet Key Exchange (IKE) Group Description Registry
This memo allocates code points for four new elliptic curve domain parameter sets over finite prime fields into a registry that was established by the Internet Key Exchange (IKE) but is used by other protocols.
Additional XML Security Uniform Resource Identifiers (URIs)
This document expands, updates, and establishes an IANA registry for the list of URIs intended for use with XML digital signatures, encryption, canonicalization, and key management. These URIs identify algorithms and types of information. This document obsoletes RFC 4051.
RADIUS Attribute for IPv6 Rapid Deployment on IPv4 Infrastructures (6rd)
The IPv6 Rapid Deployment on IPv4 Infrastructures (6rd) provides both IPv4 and IPv6 connectivity services simultaneously during the IPv4/IPv6 coexistence period. The Dynamic Host Configuration Protocol (DHCP) 6rd option has been defined to configure the 6rd Customer Edge (CE). However, in many networks, the configuration information may be stored in the Authentication Authorization and Accounting …
Remote Authentication Dial In User Service (RADIUS) Protocol Extensions
The Remote Authentication Dial-In User Service (RADIUS) protocol is nearing exhaustion of its current 8-bit Attribute Type space. In addition, experience shows a growing need for complex grouping, along with attributes that can carry more than 253 octets of data. This document defines changes to RADIUS that address all of the above problems.
This document proposes an experiment to increase the permitted TCP initial window (IW) from between 2 and 4 segments, as specified in RFC 3390, to 10 segments with a fallback to the existing recommendation when performance issues are detected. It discusses the motivation behind the increase, the advantages and disadvantages of the higher initial window, and presents results from several large-scal…
Variants in Second-Level Names Registered in Top-Level Domains
Internationalized Domain Names for Applications (IDNA) provides a method to map a subset of names written in Unicode into the DNS. Because of Unicode decisions, appearance, language and writing system conventions, and historical reasons, it often has been asserted that there is more than one way to write what competent readers and writers think of as the same host name; these different ways of wri…
The Dynamic Host Configuration Protocol for IPv4 (DHCPv4) Leasequery protocol allows a requestor to request information about DHCPv4 bindings. This protocol is limited to queries for individual bindings. In some situations, individual binding queries may not be efficient or even possible. This document extends the DHCPv4 Leasequery protocol to allow for bulk transfer of DHCPv4 address binding data…
This document defines a new Relay Agent Identifier sub-option for the Dynamic Host Configuration Protocol (DHCP) Relay Agent Information option. The sub-option carries a value that uniquely identifies the relay agent device within the administrative domain. The value is normally administratively configured in the relay agent. The sub-option allows a DHCP relay agent to include the identifier in th…
Registration of Second-Level URN Namespaces under "ietf"
RFC 2648 defines the "ietf" URN namespace and a number of sub- namespaces. RFC 3553 defines an additional sub-namespace, "params", and creates a registry to document allocations under that. But there is no registry that lists, in one place, all sub-namespaces of "ietf". This document creates and populates such a registry, thereby changing the mechanism defined in RFC 2648 for adding new sub- names…
MPLS Transport Profile (MPLS-TP) Identifiers Following ITU-T Conventions
This document specifies an extension to the identifiers to be used in the Transport Profile of Multiprotocol Label Switching (MPLS-TP). Identifiers that follow IP/MPLS conventions have already been defined. This memo augments that set of identifiers for MPLS-TP management and Operations, Administration, and Maintenance (OAM) functions to include identifier information in a format typically used by…