NIST · ИТ

IR 7399

Computer Security Division 2006 Annual Report

IR 7387

Cell Phone Forensic Tools: an Overview and Analysis Update

Status of the DARPA WBST High Power Electronics Program in SiC Device Development and Technology Transition

Status of the DARPA WBST High Power Electronics Program in SiC Device Development and Technology Transition

The emergence of High-Voltage, High-Frequency (HV-HF) Silicon-Carbide (SiC) power devices is expected to revolutionize industriall and military power generation, transmission and distribution systems. The DARPA Wide Bandgap Semiconductor Technology (WBST)

Sensor Location through Linear Programming with Arrival Angle Constraints

Sensor Location through Linear Programming with Arrival Angle Constraints

In previous work, we established a linear programming framework to determine sensor location from measured link distances between neighboring nodes in a network. Besides providing greater accuracy compared to other techniques, linear programs in particular

Recommendation for Random Number Generation Using Deterministic Random Bit Generators (Revised)

Recommendation for Random Number Generation Using Deterministic Random Bit Generators (Revised)

[Superseded by SP 800-90A (January 2012): http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910345 ] This Recommendation specifies mechanisms for the generation of random bits using deterministic methods. The methods provided are based on either

Recommendation for Pair-Wise Key Establishment Using Discrete Logarithm Cryptography (Revised)

Recommendation for Pair-Wise Key Establishment Using Discrete Logarithm Cryptography (Revised)

[Superseded by SP 800-56A Rev. 2 (May 2013): http://www.nist.gov/manuscript-publication-search.cfm?pub_id=913431 ] This Recommendation provides the specifications of key establishment schemes that are appropriate for use by the U.S. Federal Government

SP 800-90 Rev. 1

Recommendation for Random Number Generation Using Deterministic Random Bit Generators (Revised)

SP 800-56A Rev. 1

Recommendation for Pair-Wise Key Establishment Schemes Using Discrete Logarithm Cryptography

Estimating Common Vector Parameters in Interlaboratory Studies

Estimating Common Vector Parameters in Interlaboratory Studies

The primary goal of this work is to extend two methodsof random effects models to multiparameter situation. These methods comprise the DerSimonian-Laird estimator, arising in the meta-analysis, and the Mandel-Paule algorithm widely used in interlaboratory

Codes for the Identification of Federal and Federally-Assisted Organizations (NIST SP 800-87 v1.0, March 2007 edition)

Codes for the Identification of Federal and Federally-Assisted Organizations (NIST SP 800-87 v1.0, March 2007 edition)

[Superseded by SP 800-87 Rev. 1 (April 2008): http://www.nist.gov/manuscript-publication-search.cfm?pub_id=152125 ] The Homeland Security Presidential Directive HSPD-12 called for new standards to be adopted governing the interoperable use of identity

SP 800-87

Codes for the Identification of Federal and Federally Assisted Organizations

SP 800-100

Information Security Handbook: A Guide for Managers

Recommendation for Key Management - Part 1: General (Revised) (March 2007 edition)

Recommendation for Key Management - Part 1: General (Revised) (March 2007 edition)

[Superseded by SP 800-57 Part 1 Rev. 3 (July 2012): http://www.nist.gov/manuscript-publication-search.cfm?pub_id=910342 ] This Recommendation provides cryptographic key management guidance. It consists of three parts. Part 1 provides general guidance and

3-D Motion Estimation Using Range Data

3-D Motion Estimation Using Range Data

Advanced vehicle-based safety and warning systems use laser scanners to measure road geometry (position, curvature), and range to obstacles in order to warn a driver of an impending crash and/or to activate safety devices (air bags, brakes, steering). In

SP 800-57 Part 1 Rev. 2

Recommendation for Key Management, Part 1: General (Revised)

Intrustion Detection and Prevention Systems

Intrustion Detection and Prevention Systems

This bulletin summarizes the recommendations developed by NIST for organizations in the effective use of intrusion detection and prevention systems (IDPS). These software systems help organizations to monitor and analyze events occurring in their

ITL Bulletin

Intrusion Detection and Prevention Systems

Long-Term Stability Test System for High-Voltage, High-Frequency SiC Power Devices

Long-Term Stability Test System for High-Voltage, High-Frequency SiC Power Devices

This paper presents test system developed for long-term stability characterization of 10 kV Silicon Carbide (SiC) power MOSFETs and SiC diodes under 20 kHz hard switching conditions. The system is designed to operate a single power switch and a single

Guidelines on Electronic Mail Security

Guidelines on Electronic Mail Security

This document was developed in furtherance of NIST's statutory responsibilities under the Federal Information Security Management Act (FISMA) of 2002, Public Law 107-347. The purpose of the publication is to recommend security practices for designing

Guide to Intrusion Detection and Prevention Systems (IDPS)

Guide to Intrusion Detection and Prevention Systems (IDPS)

The National Institute of Standards and Technology (NIST) developed this document in furtherance of its statutory responsibilities under the Federal Information Security Management Act (FISMA) of 2002, Public Law 107-347. This publication seeks to assist

SP 800-94

Guide to Intrusion Detection and Prevention Systems (IDPS)

SP 800-45 Version 2

Guidelines on Electronic Mail Security

Low-Noise PPLN-based Single-Photon Detector

Low-Noise PPLN-based Single-Photon Detector

This paper describes the detection of single photons, which have been transmitted through standard fiber at the telecom wavelength of 1310 nm. Following transmission, the 1310-nm photon is up-converted to 710 nm in a periodical-poled LiNbO3 (PPLN)

Asymmetric Dielectric Trilayer Cantilever Probe for Calorimetric High-Frequency Field Imaging

Asymmetric Dielectric Trilayer Cantilever Probe for Calorimetric High-Frequency Field Imaging

Magnetic field imaging probes are developed in this work. Multi-material, MEMS-based cantilever probes were developed for high frequency magnetic field imaging. The basic configuration of the probe consists of a cantilever beam fabricated by surface

Establishing Wireless Robust Security Networks: A Guide to IEEE 802.11i

Establishing Wireless Robust Security Networks: A Guide to IEEE 802.11i

This report provides readers with a detailed explanation of next generation 802.11 wireless security. It describes the inherently flawed Wired Equivalent Privacy (WEP) and explains 802.11i's two-step approach (interim and long-term)to providing effective

SP 800-97

Establishing Wireless Robust Security Networks: A Guide to IEEE 802.11i

Asymmetric Dielectric Trilayer Cantilever Probe for Calorimetric High-Frequency Field Imaging

Asymmetric Dielectric Trilayer Cantilever Probe for Calorimetric High-Frequency Field Imaging

Multimaterial, microelectromechanical systems-based cantilever probes were developed for high-frequency magnetic field imaging. The basic configuration of the probe consists of a cantilever beam fabricated using surface micromachining and bulk

Security Controls for Information Systems: Revised Guidelines Issued by NIST

Security Controls for Information Systems: Revised Guidelines Issued by NIST

This bulletin summarizes the information provided in NIST SP 800-53, concerning the guidance developed for federal agencies in selecting and specifying security controls for their information systems. The bulletin discusses the contents of SP 800-53 and

Scanning Advanced Automobile Technology

Scanning Advanced Automobile Technology

The progress of some of the key electrical, electronics, communications, controls and software technologies that enable in-vehicle, vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) functions is presented, in historical, current & futuristic

ITL Bulletin

Security Controls for Information Systems: Revised Guidelines Issued by NIST